Skip to content
DIY

DIY

  • Sold out
    €7,70

    Contrast to the ordinary relay, this latching relay does not need continuous power to keep the state, only a rising/falling pulse is needed to change the work state. The power can even be removed when the work state do not need to change, making the module especially suitable for low-power projec...

    View full details
  • Sold out
    €6,80

    The Grove - I2C Motor Driver (TB6612FNG) can drive two DC motors up to 12V/1.2A or one stepper motor up to 12V/1.2A. With the on-board MCU, it easily works with Arduino via the Grove I2C interface. This diver board is based on TB6612FNG, which is a driver IC for DC motor and stepper motor with o...

    View full details
  • Sold out
    €6,80

    Feetech Micro 360 Degree Continuous Rotation Servo v2: Dead band has been expanded from 10us to 90us Uses SMD potentiometer

  • Sold out
    €5,50

    Feetech Micro 1.8kg.cm Metal Gears Analog Servo

  • Sold out
    €5,10

    Feetech Micro 0.12sec/60degrees 1.3kg.cm Analog Servo. This is a great general-purpose actuator for tiny mechanisms. The FS90 is a 9 g analog servo that offers position control over an approximate 120° operating angle for servo pulses between 900 µs and 2100 µs. As with most servos, the pulse ra...

    View full details
  • Sold out
    €12,90

    Feetech 9kg Torque analog servo - Standard RC Metal Gear Servo Motor: A servo motor is a rotary or linear drive that allows precise control of angle or linear position, speed and acceleration.  It consists of a suitable motor coupled with a sensor for position feedback.  Servo motors are widely u...

    View full details
  • Sold out
    €9,40

    Feetech Continuous Rotation 360 degrees

  • €8,70

    Board Enclosure is what you need to protect your Arduino Board. Specifically designed for the Arduino Uno, Zero, Mega, Due; it accommodates the board and your shield perfectly and keep your standalone projects safe from short circuits and external hazards

    €8,70
  • €5,40

    USB 2.0 Type A Male to Micro Type B Male Cable Black - 1.8 m This cable is needed to connect your PC to a board that uses this kind of connector.

    €5,40
  • €154,00

    MAKERphone is an educational device shaped like a mobile phone. Its purpose: to motivate people to explore, learn and create something new in a fun and interesting way.   Who is this kit for? Based on our experience, an 11-year-old kid should be able to assemble a MAKERphone kit with a tiny b...

    View full details
    €154,00
  • €127,60

    MAKERphone is an educational device shaped like a mobile phone. Its purpose: to motivate people to explore, learn and create something new in a fun and interesting way.   Who is this kit for? Based on our experience, an 11-year-old kid should be able to assemble a MAKERphone kit with a tiny b...

    View full details
    €127,60
  • Sold out
    €28,10

    The kit uses JGA25 DC geared motors and optical encoders for higher motor control accuracy and double-layer acrylic plates for easy placement of sensors and development boards. With this kit you can assemble your balance car, a mini Segway, or your personal project. Select the right sensor and d...

    View full details
  • €11,00

    4 wires intended for ground and 4 for signals. Color coded to match Saleae software (channels 4-7) Total length is 0,8 meter (31,5")

    €11,00
  • Sold out
    €126,50

    During the assembly, users will get familiar with each component of a game console and explore their functions. Assembly is fairly simple and does not require any tools or special skills. No soldering is needed to make Pyxa work. Resolution of Pyxa is 128 x 160 pixels and it is capable of display...

    View full details
  • €57,80

    Professional pH Sensor Meter Kit with industrial electrode. It has built-in simple, convenient, practical connection and long life (up to 1 year), which makes it very suitable for long term online monitoring. It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor inter...

    View full details
    €57,80
  • €27,60

    Analog pH Sensor / Meter Kit specially designed for Arduino controllers and has convenient and practical "Gravity" connector and a bunch of features. Instant connection to your probe an your Arduino to get pH measurements at ± 0.1pH (25 ℃). For most hobbyist this great accuracy range and it's low...

    View full details
    €27,60
  • Sold out
    €21,80

    The Teensy is a complete USB-based microcontroller development system, in a very small footprint, capable of implementing many types of projects. All programming is done via the USB port. No special programmer is needed, only a standard micro USB cable and a PC or Macintosh with a USB port. New ...

    View full details
  • €12,90

    Teensy-LC (Low Cost) is a powerful 32 bit microcontroller board, with a rich set of hardware peripherals, at a very affordable price! Teensy-LC delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cortex-M0+ processor at 48 MHz, 62K Flas...

    View full details
    €12,90
  • €1,10

    6/8/10pin Female/Male header strips Uno printed and 2x3 Female header, very useful for board extensions. We use them extensively on Proto Shield PCB, but they are useful in any shield because of their height.↵- Features:↵Receptacle Style: Square↵Number of Ways/Pins: 6/8/10↵Pin Spacing: 2.54 mm↵Co...

    View full details
    €1,10
  • €16,40

    Introduction The Education Shield is a custom-made shield designed by Arduino Education, specially tailored for educational purposes to enable quick and easy learning while building projects. The shield is meant to be used in conjuction with the CTC Program. It connects to an Arduino 101 or UNO a...

    View full details
    €16,40
  • €13,20

    The Arduino MKR SD Proto Shield allows you to easily connect an SD card to your MKR form factor board. Use it to enhance the IoT features of your MKR1000, as well as store data coming from the web or sensors read by your board! There's also a small prototyping area for soldering components.

    €13,20
  • €8,70

    The MKR Proto Large Shield fits onto your MKR board using its provided female/male headers and enables you to fix it wherever you want with the mounting holes. This shield features a larger prototyping area with more than 300 solder points and makes connecting components to your board super simpl...

    View full details
    €8,70
  • €7,60

    The MKR Proto Shield is a prototyping shield designed for your MKR board. This shield easily plugs onto your MKR using its provided female/male headers, and offers a duplicate breakout for each pin on the board along with many solderable through-holes on a standard 0.1” grid (2.54mm).

    €7,60
  • €31,90

    If you are experimenting with monitoring fleets, high-altitude scientific experiments, or any kind of project requiring localization of devices, the MKR GPS Shield will offer you the functionality you need, and it is plug 'n' play! The MKR GPS Shield is based on the u-blox SAM-M8Q GNSS (Global N...

    View full details
    €31,90
x