Skip to content
Robotics&Drones

Robotics&Drones

  • €82,00

    The Portenta H7 Lite Connected is designed to provide the computational power of the Portenta H7 for AI applications and low-latency control solutions, with a module that is made more cost-effective by removing the high-resolution video interface feature. It fills the gap between the full H7 and...

    View full details
    €82,00
  • €60,00

    The Portenta H7 Lite is a cost-effective solution, designed for complex environments where radio communication is not suitable or possible. It is perfect for developers who want to leverage the computational power of the Portenta H7, without the need for video output or advanced security features...

    View full details
    €60,00
  • €199,00

    The TinkerKit Braccio is a fully operational robotic arm, controlled via Arduino. It can be assembled in several ways for multiple tasks such as moving objects. You can also attach a camera or solar panel. There are so many ways in which the Braccio can extend the reach of your devices. Plea...

    View full details
    €199,00
  • Sold out
    €408,50

    The ROBOTIS MINI can be programmed using RoboPlus Task (R+Task), a graphical, drag-and-drop programming tool based on C++. You can also create complex motions or choreography using RoboPlus Motion (R+Motion), a motion-editing tool. You can download the free ROBOTIS MINI APP on your Android or iOS...

    View full details
    €408,50
  • €82,00

    Enhance your Robotis Mini capabilities with the Spare Parts. The ROBOTIS MINI Spare Parts Pack 1 includes components from the ROBOTIS MINI kit such as the battery, cables, rivets and tapping screws. Look at the full list here: 1 Li-ion battery 3.7V 1300mAh LB-041 1 Li-ion Battery Charger Set L...

    View full details
    €82,00
  • €7,54

    Fast robotics prototyping made simple thanks to this expansion shield. No need of soldering and wiring, things that often becomes an issue when a bridged connection happens and components break. Often, without this solution, robot prototyping or electronics DIY becomes a very long term project. ...

    View full details
    €7,54
  • €13,00

    DYNAMIXEL Shield for Arduino MKR allows users to easily use ROBOTIS’ DYNAMIXEL Series along with Arduino MKR Boards.   The features are as follows: Compatible with Arduino MKR Compatible with ROBOTIS DYNAMIXEL TTL Series (Discontinued DYNAMIXEL may not be supported) For 12V DYNAMIXEL power ...

    View full details
    €13,00
  • €18,06

    XL-320 has a high performance and precise control feature compared to its compact size. It supports TTL communication with a daisy chain feature to help easily build small robots. XL-320 has a high reliability and accuracy for position control along with PID control.

    €18,06
  • €79,99

    The three-wheel drive omnidirectional wheel platform uses omnidirectional wheel technology for omnidirectional motion. Includes vertical and lateral movements. The main part of the car consists of three motors and three omnidirectional wheels. The motor adopts photoelectrically encoded DC geared ...

    View full details
    €79,99
  • €34,62

    Use for any electronic, soldering, crafting, painting, replica, figurine and hobby work - or any precision project that requires extreme accuracy. Four all-metal flexible gooseneck helping hands are easily positioned where you want them. Eliminates the frustration of traditional helping hands....

    View full details
    €34,62
  • €9,50

    Grove - Servo is used in driving mechanism of robots. The module is a bonus product for Grove lovers. We regulated the three-wire servo into a Grove standard connector. You can plug and play it as a typical Grove module now, without jumper wires clutter.But if you feel more like a proto servo, ch...

    View full details
    €9,50
  • €6,12

    The Grove - I2C Motor Driver (TB6612FNG) can drive two DC motors up to 12V/1.2A or one stepper motor up to 12V/1.2A. With the on-board MCU, it easily works with Arduino via the Grove I2C interface. This diver board is based on TB6612FNG, which is a driver IC for DC motor and stepper motor with o...

    View full details
    €6,12
  • Sold out
    €13,90

    It is mainly used in mechanical motion control, Like CNC milling machine, laser cutter, 3D printer, it also can used in robot platform motion control! Specification:   •Phase: 2 •Step Angle: 1.8° •Voltage: 12/24 •Resistance: 11ohm •Rate Current: 0.45A/Phase •Phase Resistance: 7.5ohm/Phase...

    View full details
    €13,90
  • €12,90

    The Digital Continuous Rotation(360°)Servo Module is a high quality servo with the standard TinkerKit 3pin connector to be plugged in the Sensor Shield (remember that the Signal pin is ALWAYS the center pin). The best choice to add Robotics & Mechatronics to your project. Servos are composed ...

    View full details
    €12,90
  • €49,02

    The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier can also be used to connect other actuators and sensors via a series of 3-pin male headers. The summary of features is shown below: Compatible with all the boards in the MKR family Fou...

    View full details
    €49,02
  • Sold out
    €17,50

    The Nano 33 BLE (without headers) is Arduino’s 3.3V compatible board in the smallest available form factor: 45x18mm! The Arduino Nano 33 BLE is a completely new board on a well-known form factor. It comes with an embedded 9 axis inertial sensor what makes this board ideal for wearable devices, b...

    View full details
    €17,50
  • €19,50

    The Nano 33 BLE (with headers) is Arduino’s 3.3V compatible board in the smallest available form factor: 45x18mm! The Arduino Nano 33 BLE is a completely new board on a well-known form factor. It comes with an embedded 9 axis inertial sensor what makes this board ideal for wearable devices, but ...

    View full details
    €19,50
  • €20,00

    The Arduino Motor Shield is based on the L298 (datasheet), which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently...

    View full details
    €20,00
  • €34,00

    The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 ...

    View full details
    €34,00
  • Sold out
    €27,90

    It Includes: 6V DC motor(13000 rpm ±14%)  x2 Small stepper motor x1 Standard servo  x1(Speed: 0.17/60°@4.8V; 0.14/60°@6.0V)/(Torque: 3.5kg.cm@4.8V;  4.8kg.cm@6.0V) Micro servo  x1(Speed: 0.12/60°@4.8V; 0.10/60°@6.0V)/(Torque: 1.5kg.cm@4.8V;  1.8kg.cm@6.0V)

    €27,90
  • Sold out
    €95,20

      Autonomous cars are the future and we’ll show you how it works. This tiny wheeled robot has a camera and a microcomputer and can be programmed to autonomously navigate a small road while driving, just like an autonomous car would. It has built-in Bluetooth and Wi-Fi so you can connect it to...

    View full details
    €95,20
x