Ideal for use with experimental plates.

It allows you to hold small objects and to have both hands free. The adjustable tweezers and the adjustable magnifying glass, available to you, allow you to carry out precision work with extreme co...

40 separable wires, each 20 cm long, with female 1-pole connector on one end and male 1-pole connector on the other end. Ideal for use with experimental plates.

Particularly suitable for reducing the number of I/Os required when used with Arduino or other microcontroller, the I²C interface has jumpers to activate the backlight and contrast adjustment which...

Dimensions: 82 x 55 mm.  White color.

Ideal for use with experimental boards! The wires are separable for ease of use.

The package includes: 20 pcs - 6x6x4.3 mm 20 pcs - 6x6x5 mm 20 pcs - 6x6x6 mm 20 pcs - 6x6x7 mm 20 pcs - 6x6x8 mm 20 pcs - 6x6x9.5 mm 20 pcs - 6x6x11 mm 15 pcs - 6x6x12 mm 15 pcs - 6x6x1...

This is a 830-point experimental ABS board with a self-adhesive base. Dimensions (mm): 165x55x10 Weight: 69 grams.

Contents of the package: 25 pieces - 0 Ohm 25 pieces - 10 Ohm 25 pieces - 20 Ohm 25 pieces - 47 Ohm 25 pieces - 470 Ohm 25 pieces - 2.2 KOhm 25 pieces - 4.7 KOhm 25 pieces - 22 KOhm 25 p...

Plastic case organized in compartments containing 300 LEDs of 3 and 5 mm with assortment in red, blue, yellow, green and white colors. 40 LEDs per color of 3mm, 20 LEDs per color of 5mm.

Transparent plastic box with compartments and closing hinge containing 500 radial electrolytic capacitors divided into 24 values ranging from 0.1µF - 1000µF. Dielectric material: aluminum. Conten...

A set consisting of 10 blue 5 mm LEDs, 10 green, 10 red, 10 yellow, 10 white, 10 common anode RGB and 10 common anode bicolour (red-green) LEDs.

Plastic package containing 10 pieces of the following horizontal mount trimmer values: 500 ohm (501) 1 kohm (102) 2 kohm (202) 5 kohm (502) 10 kohm (103) 20 kohm (203) 50 kohm (503) 100 k...

The RCWL-0516 is particularly suitable as an alternative to using a PIR motion sensor. When it detects a moving object, the output changes from a low logic level to a high level (3.3 volts). Approp...

Ideal for use with experimental boards!

This is a 840-point experimental ABS board with a self-adhesive base. Dimensions (mm): 174x66,5x8,5 mm Weight: 100 grams.

Stick with Neopixel technology with 8 RGB LEDs that can be individually managed, each of which can produce 256 shades of its own color, determining a total of 16,777,216 colors. The data channel f...

It has only three terminals and operates on 5 V power supply. Vdd= + 5 Vdc, GND= ground, OUT= TTL signal output

This is a Neopixel technology ring with 12 RGB LED diodes that can be individually controlled, each of which can produce 256 shades of its own color, resulting in a total of 16,777,216 colors. The ...

100 x 50 mm through hole board PCB

The data channel for communication is a One-Wire serial type and can be controlled with microcontrollers like Arduino.  You can set the refresh frequency as desired to make certain light effects i...

150x90 mm through hole board PCB

The data channel for communication is a One-Wire serial type and can be controlled with microcontrollers like Arduino. You can set the refresh frequency as desired to make certain light effects imp...

The data channel for communication is a One-Wire serial type and can be controlled with microcontrollers like Arduino. You can set the refresh frequency as desired to make certain light effects im...