Arduino Leonardo without headers
The Arduino Leonardo is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board; these are detailed on the getting started page.
This version of the Leonardo comes without headers.
|Input Voltage (recommended)||7-12V|
|Input Voltage (limit)||6-20V|
|Digital I/O Pins||20|
|PWM Digital I/O Pins||7|
|Analog Input Pins||12|
|DC Current per I/O Pin||40 mA|
|DC Current for 3.3V Pin||50 mA|
|Flash Memory||32 KB|
|Flash Memory for Bootloader||4 KB|
|Clock Speed||16 MHz|
Other makers also liked
DPDT Switch that can drives high currents.€2.30 + VAT
A full-featured motor shield, able to power simple/medium complexity projects.€17.90 + VAT
Shift Register 8-Bit - 74HC595€0.40 + VAT
A selection of all the components you need to get started tinkering (w/o an Arduino Board)€35.00 + VAT
By Tom Igoe, Maker Media, Inc September 2011, pages 496€28.00 + VAT
By T. Olsson, D. Gaetano, J. Odhner, and S. Wiklund€12.00 + VAT