Skip to content

Arduino

  • Sold out
    €27,90

    Arduino MKR WiFi 1010 is Arduino Iot Cloud compatible   The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a BLE device...

    View full details
    €27,90
  • €21,90

    The MKR ZERO brings you the power of a Zero in the smaller format established by the MKR form factor. The MKR ZERO board acts as a great educational tool for learning about 32-bit application development. It has an on-board SD connector with dedicated SPI interfaces (SPI1) that allows you to play...

    View full details
    €21,90
  • Sold out
    €31,99

    Arduino MKR1000 is Arduino Iot Cloud compatible Arduino MKR1000 has been designed to offer a practical and cost effective solution for makers seeking to add Wi-Fi connectivity to their projects with minimal previous experience in networking. It is based on the Atmel ATSAMW25 SoC (System on Chi...

    View full details
    €31,99
  • Sold out
    €32,99

    Arduino MKR1000 is Arduino Iot Cloud compatible Arduino MKR1000 has been designed to offer a practical and cost effective solution for makers seeking to add Wi-Fi connectivity to their projects with minimal previous experience in networking. It is based on the Atmel ATSAMW25 SoC (System on C...

    View full details
    €32,99
  • €20,00

    The Arduino Motor Shield is based on the L298 (datasheet), which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently...

    View full details
    €20,00
  • Sale
    Original price €18,00
    Current price €15,30

    The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard...

    View full details
    Original price €18,00
    Current price €15,30
  • Sold out
    €17,50

    The Nano 33 BLE (without headers) is Arduino’s 3.3V compatible board in the smallest available form factor: 45x18mm! The Arduino Nano 33 BLE is a completely new board on a well-known form factor. It comes with an embedded 9 axis inertial sensor what makes this board ideal for wearable devices, b...

    View full details
    €17,50
  • Sold out
    €27,00

    The Nano 33 BLE Sense (without headers) is Arduino’s 3.3V AI enabled board in the smallest available form factor: 45x18mm! The Arduino Nano 33 BLE Sense is a completely new board on a well-known form factor. It comes with a series of embedded sensors: 9 axis inertial sensor: what makes this b...

    View full details
    €27,00
  • Sold out
    €29,00

    The Nano 33 BLE Sense (with headers) is Arduino’s 3.3V AI enabled board in the smallest available form factor: 45x18mm! The Arduino Nano 33 BLE Sense is a completely new board on a well-known form factor. It comes with a series of embedded sensors: 9 axis inertial sensor: what makes this boar...

    View full details
    €29,00
  • €19,50

    The Nano 33 BLE (with headers) is Arduino’s 3.3V compatible board in the smallest available form factor: 45x18mm! The Arduino Nano 33 BLE is a completely new board on a well-known form factor. It comes with an embedded 9 axis inertial sensor what makes this board ideal for wearable devices, but ...

    View full details
    €19,50
  • €16,00

    Arduino Nano 33 IoT is Arduino Iot Cloud compatible The Arduino Nano 33 IoT is the easiest and cheapest point of entry to enhance existing devices (and creating new ones) to be part of the IoT and designing pico-network applications. Whether you are looking at building a sensor network connect...

    View full details
    €16,00
  • €18,00

    Arduino Nano 33 ioT is Arduino Iot Cloud compatible The Arduino Nano 33 IoT is the easiest and cheapest point of entry to enhance existing devices (and creating new ones) to be part of the IoT and designing pico-network applications. Whether you are looking at building a sensor network connect...

    View full details
    €18,00
  • €13,00

    The Nano Every is Arduino’s 5V compatible board in the smallest available form factor: 45x18mm! The Arduino Nano is the preferred board for many projects requiring a small and easy to use microcontroller board. The small footprint and low price, make the Nano Every particularly suited for wearab...

    View full details
    €13,00
  • Sale
    Original price €99,00
    Current price €84,15

    The Oplà IoT Kit allows you to add connectivity to devices around the home or workplace. It comes complete with a set of 8 Internet of Things self assemble projects ready to show you how to turn everyday appliances into ‘smart appliances’ and build custom connected devices that can be controlle...

    View full details
    Original price €99,00
    Current price €84,15
  • Sale
    Original price €3,50
    Current price €2,80

    Fullprinted BIC Pencil

    Original price €3,50
    Current price €2,80
  • Sold out
    €20,00

    Highligts 4000 mAh abs Capacity for smartphone use output DC5V/1A smartphone support micro USB cable Color white  silver Arduino logo Dimension 13 x 6,5 x 1 cm 0,157 kg

    €20,00
  • €21,00

    Even though Arduino Education kits are jam-packed with everything you need, we know that mislaying parts in the excitement of getting hands-on in a classroom can sometimes happen. In the Arduino Replacements Pack, you’ll find all the common electronics parts two students may need to complete thei...

    View full details
    €21,00
  • €130,00

    Science teachers who want to bring an inquiry-based, hands-on approach to their middle school classrooms can enable their students to think and act like real scientists with the Science Kit Physics Lab. Developed in partnership with Google, the kit challenges students to explore and explain the ...

    View full details
    €130,00
  • Sale
    Original price €44,70
    Current price €40,23

    The Arduino Sensor Kit is made for Makers who have just started using Arduino to explore the vast space of electronics and programming. This kit teaches how to connect and program basic Grove modules that includes both  sensors and actuators along with the Arduino Uno.  Grove is an open-source, ...

    View full details
    Original price €44,70
    Current price €40,23
  • €57,24

    Arduino Uno WiFi is functionally the same as the Arduino Uno Rev3, but with the addition of WiFi / Bluetooth and some other enhancements. It incorporates the brand new ATmega4809 8-bit microcontroller from Microchip and has an onboard IMU (Inertial Measurement Unit) LSM6DS3TR. Arduino Sensor Ki...

    View full details
    €57,24
  • €3,00

    Arduino SIM card offers easy, global cellular connectivity for your Arduino IoT Cloud projects. You can monitor your devices anytime, anywhere in the world thanks to the GSM / 3G network, which currently is the most extended one. Arduino SIM is ideal for connected devices on the go, or in areas w...

    View full details
    €3,00
  • Sold out
    €60,90

    Arduino's GSM 1400 CELLULAR KIT includes a MKR GSM 1400 board, Arduino's pentaband antenna, and an Arduino SIM card with a worldwide dataplan (except Brazil). The Arduino MKR GSM 1400 takes advantage of the cellular network as a means to communicate. The GSM / 3G network is the one that covers t...

    View full details
    €60,90
  • Sold out
    €15,00

    Highlight Speaker Bluetooth 5.0 ABS Lithium battery 180 mAh USB cable included Output: 4 Ohm, 5 V e 3 W. Color White with silver Arduino Logo Shape Little mushroom  Diameter 5,4 x 5,2 cm

    €15,00
  • €449,00

    The Arduino Starter Kit Classroom Pack is a bundled solution, containing six of the popular Arduino Starter Kits. This Classroom 6-Pack is for a classroom of at least twelve students — the recommended ratio is two students per kit — and intended for use starting from middle school teachers onward...

    View full details
    €449,00
  • €449,00

    The Arduino Starter Kit Classroom Pack is a bundled solution, containing six of the popular Arduino Starter Kits. This Classroom 6-Pack is for a classroom of at least twelve students — the recommended ratio is two students per kit — and intended for use starting from middle school teachers onwar...

    View full details
    €449,00
  • €449,00

    The Arduino Starter Kit Classroom Pack is a bundled solution, containing six of the popular Arduino Starter Kits in italian. This Classroom 6-Pack is for a classroom of at least twelve students — the recommended ratio is two students per kit — and intended for use starting from middle school teac...

    View full details
    €449,00
  • €449,00

    The Arduino Starter Kit Classroom Pack is a bundled solution, containing six of the popular Arduino Starter Kits. This Classroom 6-Pack is for a classroom of at least twelve students — the recommended ratio is two students per kit — and intended for use starting from middle school teachers onwar...

    View full details
    €449,00
  • Sold out
    €449,00

    The Arduino Starter Kit Classroom Pack is a bundled solution, containing six of the popular Arduino Starter Kits. This Classroom 6-Pack is for a classroom of at least twelve students — the recommended ratio is two students per kit — and intended for use starting from middle school teachers onwar...

    View full details
    €449,00
  • Sale
    Original price €79,90
    Current price €63,90

    Quickly and easily get started with learning electronics using the Arduino Starter Kit, which have a universal appeal to STEM fans at home, businesses in STEAM industries, and schools alike. No prior experience is required, as the kits introduce both coding and electronics through fun, engaging, ...

    View full details
    Original price €79,90
    Current price €63,90
  • Sale
    Original price €15,00
    Current price €12,00

    Highlights Cotton Crew neck Arduino Logo printed on chest Color Orange Size S (42 x 33 cm) M (49 x 36.5 cm) L (57 x 40 cm) XL (65 x 44 cm) Shape Regular kid fit

    Original price €15,00
    Current price €12,00
  • Sale
    Original price €20,00
    Current price €16,00

    Highlights Regular man fit Cotton Crew neck Arduino Logo printed on chest Color Grey Size S (68 x 48 cm) M (71 x 52 cm) L (74 x 56 cm) XL (77 x 60 cm)

    Original price €20,00
    Current price €16,00
  • Sale
    Original price €20,00
    Current price €16,00

    Highlights Regular woman fit Cotton Crew neck Arduino Logo printed on chest Color White Size S (62 x 44 cm) M (64 x 47 cm) L (66 x 51 cm) XL (68 x 55 cm)

    Original price €20,00
    Current price €16,00
  • Sold out
    €42,00

    The Tiny Machine Learning Kit, combined with the exciting TinyML Applications and Deploying TinyML on Microcontrollers courses that are part of the Tiny Machine Learning (TinyML) specialization from EdX will equip you with all the tools you need to bring your ML visions to life! The kit consists...

    View full details
    €42,00
  • €7,90

    Protective case designed specifically for the Arduino Uno, the perfect companion!

    €7,90
  • Sale
    Original price €19,00
    Current price €15,20

    The Arduino Uno Rev3 SMD is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator (CSTCE16M0V53-R0), a USB connection, a power jack, an ICSP header, and a reset button. It contains e...

    View full details
    Original price €19,00
    Current price €15,20
  • €38,90

    The Arduino UNO WiFi Rev.2 is the easiest point of entry to basic IoT with the standard form factor of the UNO family. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a BLE device sending data to a cellphone, the Arduino UNO W...

    View full details
    €38,90
  • €35,00

    The possibilities are infinite with this Kit of essential Arduino components.Prototype with the solderless breadboard to control sensors and actuators with Arduino. You'll need some materials of your own as your progress through your project to make it really unique.At the very least, you will ne...

    View full details
    €35,00
  • Sold out
    €49,00

    The Yún rev. 2 with the power of a Linux based system that enables advanced network connections and applications. Connection to your WiFi or wired network is simple thanks to the Yún Web Panel and the dedicated ''YunFirstConfig'' sketch. The Web panel allows you to manage your shield preferences ...

    View full details
    €49,00
  • €32,38

    The Zero is a simple and powerful 32-bit extension of the platform established by the UNO. The Zero board expands the family by providing increased performance, enabling a variety of project opportunities for devices, and acts as a great educational tool for learning about 32-bit application deve...

    View full details
    €32,38
  • €4,50

    Atmel ATmega328 microcontoller in a DIL-28 package , pre-loaded with the Arduino UNO 16MHz bootloader. Using this device enables the use of Arduino code in a custom embedded project without having to use an actual Arduino board. 

    €4,50
  • Sold out
    €50,00

    This bundle contains all you need to start with home automation using Arduino and Telegram App. Look at the Project here and build your first home automation tool step by step!   1. Hardware Setup  2. Telegram Bot Setup  3. The Sketch 1: first connection to Telegram Bot  4. The Sketch 2: from LED...

    View full details
    €50,00
  • €7,90

    Board Enclosure is what you need to protect your Arduino Board. Specifically designed for the Arduino Uno, Zero, Mega, Due; it accommodates the board and your shield perfectly and keep your standalone projects safe from short circuits and external hazards

    €7,90
  • €7,90

    The case is a two-piece injection-moulded ABS enclosure that snaps together around the Arduino YUN. Holds the Arduino YUN firmly in placeIt provides tough protection for the Arduino YUN while providing access to all Arduino Mega's connectors.Includes reset key for use with the board's reset butto...

    View full details
    €7,90
  • €219,00

    Need a free hand to hold onto all those techy bits and pieces? Then the Braccio Bundle is perfect for you! With the Arduino Uno-controlled Braccio robotic arm, you can unlock the unlimited possibilities of robotics or simply use it to take the perfect selfie. 1 x TinkerKit Braccio Robot - Desi...

    View full details
    €219,00
  • €3,99

    A single solution to connect your smart devices to the Cloud. The antenna supports the GSM 850 / 900 / 1800 / 1900 MHz and UMTS bands. Designed for small devices, this antenna will work when used as wireless terminal, gateway, or access point. It is a ground plane independent design, housed in a ...

    View full details
    €3,99
  • €26,67

    Arduino Engineering Kit R2 contains all the components students need to complete each project, but we know that in the excitement of using the kit, the motors may sometimes burn, break or simply get lost. In the Engineering Kit - Motors Backup, you’ll find all the replacement motors students may...

    View full details
    €26,67
  • Sold out
    €45,00

    Measure, read and visualize the temperature, humidity, pressure, light and UV levels. This bundle with accompanying online project shows you how to set-up and read environmental data from the sensors on the Arduino MKR ENV Shield and visualize that data in an Arduino IoT Cloud Dashboard. Contain...

    View full details
    €45,00
  • €1,00

    14 pin Female Headers MKR1000 printed, we use them extensively on Large MKR Proto Shield PCB. Features: Receptacle Style: Square Number of Ways/Pins: 14 Pin Spacing: 2.54 mm Component Height: Plastic body 8.5mm

    €1,00
x