Skip to content
Free shipping on orders over 90€ to Austria, France, Germany, Italy, and Spain!*
Free shipping on orders over 90€ to Austria, France, Germany, Italy, and Spain!*

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00
DIY

DIY

DIY

DIY

  • LYRA | Handheld Game Console (Ready-To-Go)

    Creoqode Lyra is a handheld game console. Powered by Raspberry Pi CM3L (Compute Module 3 Lite), Lyra will be your game console, personal computer and entertainment system at the same time.  L...

  • CAN-BUS Shield v2

    It is commonly found on modern machine tools and as an automotive diagnostic bus. Thanks to the CAN-BUS, makers are able to hack their cars!  It adopts MCP2515 CAN-BUS controller with SPI interfac...

  • Grove - Universal 4 Pin Buckled 50cm Cable (5 Pcs)

    Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove modules to the Basic Shield or to other Grove compatible boards for quick prototyping. 50 cm cables

  • Grove - Universal 4 Pin Buckled 30cm Cable (5 Pcs)

    Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove modules to the Basic Shield or to other Grove compatible boards for quick prototyping. 30 cm cables

  • Grove - Thumb Joystick

    The X and Y axes are two ~10k potentiometers which control 2D movement by generating analog signals. The joystick also has a push button that could be used for special applications. When the module...

  • Grove - OLED Display 0.96"

    Compared to LCD, OLED screens have a number of advantages such as high brightness, self-emission, high contrast ratio, slim / thin outline, wide viewing angle, wide temperature range, and low power...

  • Grove - 6-Axis Accelerometer & Gyroscope

    It has a low power consumption digital chip LSM6DS3 and power supply regulator which features high sensitivity and low noise interference. It can be configured to different levels of sensitivity to...

  • Grove - 4 pin Male to Grove 4 pin Cable (5 Pcs)

    With this special designed conversion cables, you can easily integrate the comprehensive Grove system with breadboard or other microcontrollers that don't have compatible Grove - Base Shield yet (l...

  • Grove - 4 pin Female to Grove 4 pin Cable (5 Pcs)

    The female jumper on this cable is compatible with 2.54 pitch pin headers. With this cable, you can easily connect all of Grove modules to any 2.54 mm pitch connector.    

  • Grove - 3-Axis Digital Accelerometer (±16g)

    This 3-Axis Digital Accelerometer(±16g) is based on the low power consuming IC ADXL345. It features up to 10,000g high shock survivability and has a configurable samples per second rate. For applic...

  • Grove - 2-Coil Latching Relay

    Contrast to the ordinary relay, this latching relay does not need continuous power to keep the state, only a rising/falling pulse is needed to change the work state. The power can even be removed w...

  • Feetech Mini Servo motor 120 degrees 9g

    Feetech Micro 0.12sec/60degrees 1.3kg.cm Analog Servo. This is a great general-purpose actuator for tiny mechanisms. The FS90 is a 9 g analog servo that offers position control over an approximate...

  • Two Wheels Balance Car chassis with JGA Motor Kit

    The kit uses JGA25 DC geared motors and optical encoders for higher motor control accuracy and double-layer acrylic plates for easy placement of sensors and development boards. With this kit you c...

  • USB Cable Type A Male to Micro Type B Male

    USB 2.0 Type A Male to Micro Type B Male Cable Black - 1 m This cable is needed to connect your PC to a board that uses this kind of connector.

  • Robot with 58mm Omnidirectional Wheel & Smart Car Chassis Kit

    The three-wheel drive omnidirectional wheel platform uses omnidirectional wheel technology for omnidirectional motion. It includes vertical and lateral movements. The main part of the car consists ...

  • Wire Harness - 2x4 Saleae

    4 wires intended for ground and 4 for signals. Color coded to match Saleae software (channels 4-7) Total length is 0,8 meter (31,5")

  • Pyxa | DIY Game Console

    During the assembly, users will get familiar with each component of a game console and explore their functions. Assembly is fairly simple and does not require any tools or special skills. No solder...

  • Gravity: Analog pH Sensor / Meter Pro Kit For Arduino

    Professional pH Sensor Meter Kit with industrial electrode. It has built-in simple, convenient, practical connection and long life (up to 1 year), which makes it very suitable for long term online ...

  • Gravity: Analog pH Sensor - Meter Kit

    Analog pH Sensor / Meter Kit specially designed for Arduino controllers and has convenient and practical "Gravity" connector and a bunch of features. Instant connection to your probe an your Arduin...

  • DT71 Mini Digital Tweezers

    DT71 has a unique ternary structure, which can be separated into controller, testing arms and tweezer tips, flexible to be replaced and combined. 360° rotatable with OLED screen, visible at all ang...

  • Arduino Student Kit

    Learn the basics of programming, coding and electronics including current, voltage, and digital logic. No prior knowledge or experience is necessary as the kit guides you through step by step.  Yo...

  • ARDUINO CTC GO! - CORE MODULE

    Engage high school students in STEAM subjects, teach them how to use technology as a tool in a playful, hands-on learning environment, and how to apply that knowledge in the real world. A modular c...

  • Coastal Living Model Kit

    The Arckit Coastal Living scale model building kits lets you imagine a day in the surf from the comfort of home! (Scale 1:50 / 1/4) Ideal for Budding architects from age 7 years old to create and ...

  • Mountain Living Model Kit

    The Arckit Mountain Living scale model building kits lets you build atop cliffs of imagination from the comfort of your home! (Scale 1:50 / 1/4) Ideal for Budding architects from age 7 years old t...

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare