Skip to content
Green & Sustainability

Green & Sustainability

  • €9,70

    The Nano I/O Sensor Shield is an expansion board for the Arduino Nano. There are several different options for power input. The form factor of the Nano I/O Shield board is the same as the Arduino UNO/Arduino Leonardo. In addition, the sensor shield adopts Gravity interface that each pinout includ...

    View full details
    €9,70
  • €51,91

    Professional pH Sensor Meter Kit with industrial electrode. It has built-in simple, convenient, practical connection and long life (up to 1 year), which makes it very suitable for long term online monitoring. It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor inter...

    View full details
    €51,91
  • €2,97

    The sensor traces have a weak pull-up resistor of 1 MΩ. The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the grounded trace. Believe it or not this circuit will work with the digital I/O pins of your Arduino or you can use it with the analog pins...

    View full details
    €2,97
  • €200,00

    Watermark sensor measures on a range 0 – 239 cbars, no maintenance, frost resistant. The Watermark sensor is a rustical tool, accessible, that doesn’t need maintenance. Simple to use, accurate, pertinent. “Simple to use” does not mean that taking irrigation monitoring decisions can be done withou...

    View full details
    €200,00
  • €2,10

    Pair of 10 pin Female/Male header strips, very useful for board extensions. We use them extensively on Proto Shield PCB, but they are useful in any shield because of their height. Features: Receptacle Style: Square Number of Ways/Pins: 10 Pin Spacing: 2.54 mm Component Height: 23.5mm (Plas...

    View full details
    €2,10
  • €9,28

    This Dust Sensor gives a good indication of the air quality in an environment by measuring the dust concentration. The Particulate Matter level (PM level) in the air is measured by counting the Low Pulse Occupancy time (LPO time) in given time unit. LPO time is proportional to PM concentration. T...

    View full details
    €9,28
  • €3,07

    This sensor is very simple to use, you insert in into the soil and read the data. With this sensor in the right project, your plants can let you know when it's time to water them. Features: Soil moisture sensor based on soil resistivity measurement Easy to use 2.0 cm X 6.0 cm grove module

    €3,07
  • €19,90

    This module can be used to measure temperature, atmospheric pressure and humidity accurately and fast. As the atmospheric pressure changes with altitude, it can also measure approximate altitude of a place. It can be connected to a microcontroller with I2C (integrated with Grove socket) or throug...

    View full details
    €19,90
  • €12,30

    This device is based on SI1145, a new sensor from SiLabs. The Si1145 is a low-power, reflectance-based, infrared proximity, UV index and ambient light sensor with I2C digital interface and programmable-event interrupt output. This device offers excellent performance under a wide dynamic range and...

    View full details
    €12,30
  • €5,48

    This soil Moisture sensor is made of a corrosion resistant material giving it a long service life. Insert it into soil and impress your friends with the real-time soil moisture data! The product includes an on-board voltage regulator which gives it an operating voltage range of 3.3 ~ 5.5V. It is ...

    View full details
    €5,48
  • €27,41

    Analog pH Sensor / Meter Kit specially designed for Arduino controllers and has convenient and practical "Gravity" connector and a bunch of features. Instant connection to your probe an your Arduino to get pH measurements at ± 0.1pH (25 ℃). For most hobbyist this great accuracy range and it's low...

    View full details
    €27,41
  • €27,78

    Build up a simple environmental monitor station with this multi-function environment sensor! Based on the combination of CCS811+BME280 chip, this module features high accuracy, I2C interface, and fast Measurement. The BME280 can provide temperature and humidity compensation for CCS811 to improve...

    View full details
    €27,78
  • Save 20%
    Original price €45,99
    Current price €36,79

    The Formaldehyde (HCHO) sensor is an Arduino & Raspberry Pi compatible module, which is the ideal solution for indoor air quality monitor. This is a HCHO(CH2O) sensor module. It can be used to measure HCHO in air. Through it, you can know the air quality. This sensor module is widely used in ...

    View full details
    Original price €45,99
    Current price €36,79
  • Save 20%
    Original price €45,52
    Current price €36,41

    Gravity: I2C Ozone Sensor (0-10ppm) is based on electrochemical principles and it can measure the ambient O3 concentration accurately and conveniently. With high anti-interference ability, high stablility and high sensitivity, this arduino-compatible ozone sensor can be widely applied to fields l...

    View full details
    Original price €45,52
    Current price €36,41
  • €6,50

    Use it to connect Arduino Uno, Arduino Mega 2560, Arduino 101 or any board with the USB female A port of your computer. Cable lenght is approximately 100cm. Cable color and shape may vary slightly from image as our stock rotates. If you want to have a closer look to USB cables and standars check ...

    View full details
    €6,50
  • €8,40

    Now you can connect your Arduino boards with the official Arduino USB Cable. Through a USB-C® to USB-C with a USB-A adapter connection, this data USB cable can easily connect your Arduino boards with your chosen programming device. The Arduino USB Cable has a nylon braided jacket in white and ...

    View full details
    €8,40
  • €25,00

    Even though Arduino Education kits are jam-packed with everything you need, we know that mislaying parts in the excitement of getting hands-on in a classroom can sometimes happen. In the Arduino Replacements Pack, you’ll find all the common electronics parts two students may need to complete thei...

    View full details
    €25,00
  • €8,10

    Protective case designed specifically for the Arduino Uno, the perfect companion!

    €8,10
  • €215,00

    The Arduino Pro WisGate Edge Lite 2 powered by RAKwireless™ ensures secure and reliable connectivity for a wide range of professional applications and is suitable for medium-sized to wide area coverage in industrial environments. Its deep coverage indoors makes it ideal for applications in multi-...

    View full details
    €215,00
  • €565,00

    The Arduino Pro WisGate Edge Pro powered by RAKwireless™ ensures secure and reliable connectivity for a wide range of professional applications and is suitable for medium-sized to wide area coverage in industrial environments and remote regions. Its high transmission power and 2x fiberglass anten...

    View full details
    €565,00
  • €21,60

    The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard...

    View full details
    €21,60
  • €80,30

    Arduino MKR NB 1500 allows you to build your next smart project. Ever wanted an automated house? Or a smart garden? Well, now it’s easy with the Arduino IoT Cloud compatible boards. It means: you can connect devices, visualize data, control and share your projects from anywhere in the world. Wh...

    View full details
    €80,30
  • €6,41

    This sensor is designed for comprehensive monitor over indoor air condition. It's responsive to a wide scope of harmful gases, as carbon monoxide, alcohol, acetone, thinner, formaldehyde and so on. Due to the measuring mechanism, this sensor can't output specific data to describe target gases' co...

    View full details
    €6,41
  • €8,94

    It can widely measure pressure ranging from 300 mbar to 1200 mbar, with a super high accuracy of 0.01mbar(0.1m) in ultra-high resolution mode. The chip only accepts 1.8V to 3.6V input voltage. However, with the outer circuit on the pcb added, this module becomes compatible with 3.3V and 5V. There...

    View full details
    €8,94
x