Skip to content
Robotics

Robotics

Step into a world of mechanical marvels with our dedicated Arduino Robotics section. The collection empowers you to design, build, and program robots that can navigate, interact, and perform tasks.

Robotics

Step into a world of mechanical marvels with our dedicated Arduino Robotics section. The collection empowers you to design, build, and program robots that can navigate, interact, and perform tasks.

Robotics

  • Arduino MKR IoT Carrier Rev2

    With this carrier in combination with any board from the MKR family, you can quickly create your next IoT project without any extra components. This carrier has all you need in sensors and actuator...

  • Arduino MKR Motor Carrier

    The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier can also be used to connect other actuators and sensors via a series of 3-pin male header...

  • MKR SD Proto Shield

    The Arduino MKR SD Proto Shield allows you to easily connect an SD card to your MKR form factor board. Use it to enhance the IoT features of your MKR1000, as well as store data coming from the web ...

  • Arduino MKR Relay Proto Shield

    The MKR Relay Protoshield allows you to easily add relays to your MKR board based project. The shield provides two relays (Datasheet)  called RELAY1 and RELAY2 commanded by pin 1 and pin 2 r...

  • MKR Proto Large Shield

    The MKR Proto Large Shield fits onto your MKR board using its provided female/male headers and enables you to fix it wherever you want with the mounting holes. This shield features a larger prototy...

  • Arduino MKR Therm Shield

    The MKR THERM Shield allows a board of the MKR family to acquire temperatures from a thermocouple of type K and a DS18Bxx digital one wire sensor. The Thermocouple is a kind of temperature sensor t...

  • Arduino MKR RGB Shield

    Write messages and add graphics with this shield. A ready to use library with examples and methods is available for use to easily write static and scrollable text. You can use this shield to show...

  • Arduino MKR Mem Shield

    The Arduino MKR MEM shield will allow you to add more flash memory and storage. It provides 2-megabytes of flash memory. It also includes a slot for adding a microSD card to store several gigabyt...

  • Arduino MKR ETH Shield

    Are you developing a project for an environment where wireless connections are unavailable or would be inefficient? The MKR ETH shield allows to have a wired Ethernet connection between your MKR ...

  • Arduino MKR CAN Shield

    With this shield you can easily connect to a CAN (Controller Area Network) Bus. Discover new possibilities of interaction between your Arduino MKR Board and the CAN ecosystem. The MKR CAN shield c...

  • Arduino MKR 485 Shield

    Thanks to this shield, you can now connect your MKR board to any of the industrial systems that using the RS 485 protocol. The MKR 485 shield is the ultimate expansion that allows MKR boards to ...

  • Arduino Mega Proto Shield Rev3 (PCB)

    The Arduino Prototyping Shield makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project,or use it with a small solderless breadboard (not...

  • MKR Proto Shield

    The MKR Proto Shield is a prototyping shield designed for your MKR board. This shield easily plugs onto your MKR using its provided female/male headers, and offers a duplicate breakout for each pin...

  • Arduino MKR WiFi 1010

    The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home route...

  • Arduino MKR ZERO (I2S bus & SD for sound, music & digital audio data)

    The MKR ZERO brings you the power of a Zero in the smaller format established by the MKR form factor. The MKR ZERO board acts as a great educational tool for learning about 32-bit application devel...

  • Arduino Mega 2560 Rev3

    The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial po...

  • Arduino MKR Connector Carrier (Grove compatible)

    Do you have several components to connect to your project and would rather use connectors instead of soldering? The Arduino MKR CONNECTOR CARRIER provides Seeed Studio's Grove connectors to your ...

  • Arduino MKR WAN 1310

      Better and More Efficient The MKR WAN 1310, brings in a series of improvements when compared to its predecessor, the MKR WAN 1300. While still based on the Microchip® SAMD21 low power process...

  • Arduino MKR NB 1500

    Add Narrowband communication to your project with the MKR NB 1500. It's the perfect choice for devices in remote locations without an Internet connection, or in situations in which power isn't av...

  • Arduino MKR IMU Shield

    The MKR IMU Shield is based on the BNO055 absolute orientation sensor from Bosch Sensortec GmbH which integrates a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope with a range of ±2000 d...

  • Arduino MKR GPS Shield

    If you are experimenting with monitoring fleets, high-altitude scientific experiments, or any kind of project requiring localization of devices, the MKR GPS Shield will offer you the functionality ...

  • Arduino GIGA R1 WiFi

    The Arduino GIGA R1 WiFi is designed for ambitious makers who want to step up their game. It levels the playing field for gamers, artists, sound designers and anyone coming to the tech world with b...

  • Arduino MKR1000 WIFI

    Arduino MKR1000 has been designed to offer a practical and cost effective solution for makers seeking to add Wi-Fi connectivity to their projects with minimal previous experience in networking. I...

  • Arduino MKR1000 WIFI with Headers Mounted

    Arduino MKR1000 has been designed to offer a practical and cost effective solution for makers seeking to add Wi-Fi connectivity to their projects with minimal previous experience in networking. I...

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
x