Skip to content
Robotics

Robotics

Step into a world of mechanical marvels with our dedicated Arduino Robotics section. The collection empowers you to design, build, and program robots that can navigate, interact, and perform tasks.

Robotics

Step into a world of mechanical marvels with our dedicated Arduino Robotics section. The collection empowers you to design, build, and program robots that can navigate, interact, and perform tasks.

Robotics

  • Arduino MKR IoT Carrier Rev2

    With this carrier in combination with any board from the MKR family, you can quickly create your next IoT project without any extra components. This carrier has all you need in sensors and actuator...

  • Portenta H7 Lite Connected

    The Portenta H7 Lite Connected is designed to provide the computational power of the Portenta H7 for AI applications and low-latency control solutions, with a module that is made more cost-effectiv...

  • Portenta H7 Lite

    The Portenta H7 Lite is a cost-effective solution, designed for complex environments where radio communication is not suitable or possible. It is perfect for developers who want to leverage the com...

  • Arduino MKR Motor Carrier

    The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier can also be used to connect other actuators and sensors via a series of 3-pin male header...

  • Machine Vision Bundle

    The Arduino Portenta Vision Shield is a production-ready expansion for the powerful Arduino Portenta H7. It adds a low-power camera, two microphones, and connectivity; everything you need for the r...

  • Portenta Breakout

    Portenta Breakout board is designed to help hardware engineers and makers to prototype and help test devices connections and capacity within the Portenta family boards (e.g. the Portenta H7). It ma...

  • Portenta Vision Shield - Ethernet

    The Portenta Vision Shield brings industry-rated features to your Portenta. This hardware add-on will let you run embedded computer vision applications, connect wirelessly or via Ethernet to the Ar...

  • Portenta Vision Shield - LoRa®

    The Portenta Vision Shield LoRa® brings industry-rated features to your Portenta. This hardware add-on will let you run embedded computer vision applications, connect wirelessly via LoRa® to the Ar...

  • MKR SD Proto Shield

    The Arduino MKR SD Proto Shield allows you to easily connect an SD card to your MKR form factor board. Use it to enhance the IoT features of your MKR1000, as well as store data coming from the web ...

  • Arduino MKR Relay Proto Shield

    The MKR Relay Protoshield allows you to easily add relays to your MKR board based project. The shield provides two relays (Datasheet)  called RELAY1 and RELAY2 commanded by pin 1 and pin 2 r...

  • MKR Proto Large Shield

    The MKR Proto Large Shield fits onto your MKR board using its provided female/male headers and enables you to fix it wherever you want with the mounting holes. This shield features a larger prototy...

  • Arduino MKR Therm Shield

    The MKR THERM Shield allows a board of the MKR family to acquire temperatures from a thermocouple of type K and a DS18Bxx digital one wire sensor. The Thermocouple is a kind of temperature sensor t...

  • Arduino MKR RGB Shield

    Write messages and add graphics with this shield. A ready to use library with examples and methods is available for use to easily write static and scrollable text. You can use this shield to show...

  • Arduino MKR Mem Shield

    The Arduino MKR MEM shield will allow you to add more flash memory and storage. It provides 2-megabytes of flash memory. It also includes a slot for adding a microSD card to store several gigabyt...

  • Arduino MKR ETH Shield

    Are you developing a project for an environment where wireless connections are unavailable or would be inefficient? The MKR ETH shield allows to have a wired Ethernet connection between your MKR ...

  • Arduino MKR CAN Shield

    With this shield you can easily connect to a CAN (Controller Area Network) Bus. Discover new possibilities of interaction between your Arduino MKR Board and the CAN ecosystem. The MKR CAN shield c...

  • Arduino MKR 485 Shield

    Thanks to this shield, you can now connect your MKR board to any of the industrial systems that using the RS 485 protocol. The MKR 485 shield is the ultimate expansion that allows MKR boards to ...

  • MKR Proto Shield

    The MKR Proto Shield is a prototyping shield designed for your MKR board. This shield easily plugs onto your MKR using its provided female/male headers, and offers a duplicate breakout for each pin...

  • Portenta H7

    Portenta H7 allows you to build your next smart project. Ever wanted an automated house? Or a smart garden? Well, now it’s easy with the Arduino IoT Cloud compatible boards. It means: you can con...

  • Arduino MKR WiFi 1010

    The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home route...

  • Arduino MKR ZERO (I2S bus & SD for sound, music & digital audio data)

    The MKR ZERO brings you the power of a Zero in the smaller format established by the MKR form factor. The MKR ZERO board acts as a great educational tool for learning about 32-bit application devel...

  • Arduino MKR Connector Carrier (Grove compatible)

    Do you have several components to connect to your project and would rather use connectors instead of soldering? The Arduino MKR CONNECTOR CARRIER provides Seeed Studio's Grove connectors to your ...

  • Arduino MKR WAN 1310

      Better and More Efficient The MKR WAN 1310, brings in a series of improvements when compared to its predecessor, the MKR WAN 1300. While still based on the Microchip® SAMD21 low power process...

  • Portenta Max Carrier

    Max Carrier transforms Portenta modules into single-board computers or reference designs that enable edge AI for high-performance industrial, building automation and robotics applications. Thanks t...

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
x