Skip to content
Robotics

Robotics

Step into a world of mechanical marvels with our dedicated Arduino Robotics section. The collection empowers you to design, build, and program robots that can navigate, interact, and perform tasks.

Robotics

Step into a world of mechanical marvels with our dedicated Arduino Robotics section. The collection empowers you to design, build, and program robots that can navigate, interact, and perform tasks.

Robotics

  • HM01B0 QVGA Monochrome DVP Camera Module for Arduino GIGA R1 WiFi Board

    This camera is based on HM01B0 QVGA monochrome rolling shutter image sensor. The sensor is an Ultra Low Power Image Sensor designed for Always-on vision devices and applications. With high light se...

  • HM0360 VGA Monochrome DVP Camera Module for Arduino GIGA R1 WiFi Board

    The camera module is based on HM0360 VGA image sensor, which is an ultralow power, Back Side Illuminated (BSI) CMOS sensor designed for energy efficient smart vision applications, such as object-sp...

  • 2MP GC2145 Color DVP Camera Module for Arduino GIGA R1 WiFi Board

    This camera is based on GC2415 Color rolling shutter image sensor. The GC2145 incorporates a 1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal processor. The 2MP GC2145 camera ...

  • Arducam 0.3MP OV7675 20-pin DVP Camera Module for Arduino GIGA R1 WiFi

    The Arducam OV7675 camera provides support for resolutions of up to 640x480 pixels, ensuring the capture of clear and sharp images. Its versatile range of features enhances the functionality of you...

  • Arduino Zero Case

    This is protective case designed specifically for the Arduino Zero The case is a two-piece injection-moulded ABS enclosure that snaps together around the Arduino Zero. Holds the Arduino Zero firmly...

  • Female Headers 14 ways Arduino MKR1000 Printed

    14 pin Female Headers MKR1000 printed, we use them extensively on Large MKR Proto Shield PCB. Features: Receptacle Style: Square Number of Ways/Pins: 14 Pin Spacing: 2.54 mm Component Height: Plast...

  • Engineering Kit Motors Backup

    Arduino Engineering Kit R2 contains all the components students need to complete each project, but we know that in the excitement of using the kit, the motors may sometimes burn, break or simply ge...

  • Arduino Replacements Pack

    Even though Arduino Education kits are jam-packed with everything you need, we know that mislaying parts in the excitement of getting hands-on in a classroom can sometimes happen. In the Arduino Re...

  • Arduino Uno Case

    Protective case designed specifically for the Arduino Uno, the perfect companion!

  • MKR2UNO Adapter

    The MKR2UNO Adapter allows you to turn your Arduino UNO form factor based project into a MKR based one without too much effort! You can so upgrade your project with a powerful board with integrated...

  • Headers Strip 14 ways Arduino MKR1000 Printed

    14 pin Female/Male header strips MKR1000 printed, very useful for board extensions. We use them extensively on Proto Shield PCB, but they are useful in any shield because of their height. Features...

  • Mini encapsulated solar cell 2V 0,6W

    A photovoltaic solar panel with extremely small dimensions, ideal for conducting experiments with solar energy.

  • DC-DC Power Module 25W

    This Power Module is a small size 5A 350KHz 25V Buck DC to DC Converter. It can convert any DC voltage between 3.6V-25V to a selectable voltage from 3.3V to 25V. You can choose 5V direct output vol...

  • Solar Lipo Charger (3.7V)

    This Solar lipo charger is designed for single Lithium battery (3.7V) for intelligent charging, with input reverse polarity protection. The maximum charging current is 500 milliamperes and the con...

  • Grove - Speech Recognizer

    The board includes a Nuvoton ISD9160, a microphone, 1 SPI flash, 1 grove connector, 1 speaker connector and 1 led to show to your voice activity. Nuvoton ISD9160 is (SoC) Chipcorder that based on ...

  • ATMega328 - microcontroller - bootloader UNO

    Atmel ATmega328 microcontoller in a DIL-28 package , pre-loaded with the Arduino UNO 16MHz bootloader. Using this device enables the use of Arduino code in a custom embedded project without having ...

  • 14.5mm Strip 8 ways 2 pcs

    Pair of 8 pin Female/Male header strips, very useful for board extensions. We use them extensively on Proto Shield PCB, but they are useful in any shield because of their height. Features: Rece...

  • 14.5mm Strip 10 ways 2 pcs

    Pair of 10 pin Female/Male header strips, very useful for board extensions. We use them extensively on Proto Shield PCB, but they are useful in any shield because of their height. Features: Rec...

  • Strip 2x3/6/8/10 ways Arduino Uno Printed

    6/8/10pin Female/Male header strips Uno printed and 2x3 Female header, very useful for board extensions. We use them extensively on Proto Shield PCB, but they are useful in any shield because of th...

  • Solar Power Manager For 12V Lead-Acid Battery

    The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and applica...

  • Stereo Enclosed Speaker - 3W 8Ω

    Stereo Enclosed Speaker is a new passive speaker with JST PH2.0 interface. It is a perfect option for any DIY audio project which requires an 8 ohm impedance and 3W power. The suitable size and scr...

  • Bluetooth Low Energy 4.0 Module - HM-10

    This is a Bluetooth 4.0 (Low Energy) module compliant with ISM 2.4 GHz, with master/slave mode of operation and transparent data transmission, based on the Texas Instruments CC2541 chip with 256K F...

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
x