Skip to content
Place your order in time for the holidays! Check our shipping policy for details.
Place your order in time for the holidays! Check our shipping policy for details.
Robotics

Robotics

Step into a world of mechanical marvels with our dedicated Arduino Robotics section. The collection empowers you to design, build, and program robots that can navigate, interact, and perform tasks.

Robotics

Step into a world of mechanical marvels with our dedicated Arduino Robotics section. The collection empowers you to design, build, and program robots that can navigate, interact, and perform tasks.

Robotics

  • Arduino® UNO R4 Minima

    Enhanced and improved, the Arduino UNO R4 Minima is armed with a powerful 32-bit microcontroller courtesy of Renesas. Brace yourself for increased processing power, expanded memory, and a whole new...

  • Speed control for DC motors from 3 to 35V 5A

    Also ideal for adjusting the brightness of LED lights and strips.

  • DC/DC Step-up converter with 4-30V output

    DC/DC step-up converter with particularly small dimensions (51 x 21.5 x 13 mm), capable of converting a DC voltage between 3.5 and 30 volts into an output voltage from 4 to 30 volts (adjustable via...

  • DC/DC converter with adjustable 1.5-35V output

    Step-Down DC/DC switching converter, with particularly small dimensions (48.35 x 23.35 x 14 mm), capable of converting a DC voltage between 3 and 40 volts into an output voltage from 1.5 to 35 volt...

  • Proto Shield Rev3 (Uno Size)

    The ProtoShield makes it easy for you to design custom circuits. You can easily solder TH or SMD ICs on the prototyping area to test them with your Arduino board. The SMD area is designed for a max...

  • Arduino MKR GPS Shield

    If you are experimenting with monitoring fleets, high-altitude scientific experiments, or any kind of project requiring localization of devices, the MKR GPS Shield will offer you the functionality ...

  • 40 colored female-female jumper wires

    Ideal for use with experimental boards! The wires are separable for ease of use.

  • Pack of 50 female-female jumper wires in various colors

    Ideal for use with experimental boards!

  • USB Cable Type A Male to Micro Type B Male

    USB 2.0 Type A Male to Micro Type B Male Cable Black - 1.8 m This cable is needed to connect your PC to a board that uses this kind of connector.

  • Grove - Buzzer - Piezo

    The piezo can be connected to digital outputs, and will emit a tone when the output is high. Alternatively it can be connected to an analog pulse-width modulation output to generate various tones a...

  • Box of 100 pcs M.O. 10 VAL. trimmer resistors from 500 to 1 Mohm

    Plastic package containing 10 pieces of the following horizontal mount trimmer values: 500 ohm (501) 1 kohm (102) 2 kohm (202) 5 kohm (502) 10 kohm (103) 20 kohm (203) 50 kohm (503) 100 k...

  • Solar cell 1 V - 200 mA

    A small photovoltaic panel, ideal for conducting experiments with solar energy.

  • Mini solar cell 2V 200mA

    A small polycrystalline photovoltaic cell, ideal for conducting experiments with solar energy or LED applications.

  • 5.5 V 1 watt solar panel

    Output voltage: 5.5 V, maximum current: 170 mA, connection: red-black cable with JST connector.

  • 6 volt 3.5 watt solar panel

    This monocrystalline photovoltaic panel is ideal for charging batteries, smartphones, robotics.  

  • Mini encapsulated solar cell 2V 0,6W

    A photovoltaic solar panel with extremely small dimensions, ideal for conducting experiments with solar energy.

  • DC-DC Power Module 25W

    This Power Module is a small size 5A 350KHz 25V Buck DC to DC Converter. It can convert any DC voltage between 3.6V-25V to a selectable voltage from 3.3V to 25V. You can choose 5V direct output vol...

  • DC/DC Step-Down converter with 1.2-30 V 5A output

    DC/DC Step-Down converter that allows to convert a continuous voltage input between 5 and 32 volts into an output voltage from 1.2 to 30 volts (adjustable via trimmer). The maximum available curre...

  • Mini breadboard - White

    This is a small breadboard (4,6x3,6 cm) with 170 tie points. It is self-adhesive and compatible with the Arduino Proto Shield.

  • Breadboard 150x90

    150x90 mm through hole board PCB

  • Breadboard 100x50

    100 x 50 mm through hole board PCB

  • Solar Lipo Charger (3.7V)

    This Solar lipo charger is designed for single Lithium battery (3.7V) for intelligent charging, with input reverse polarity protection. The maximum charging current is 500 milliamperes and the con...

  • URM06 - UART Ultrasonic Sensor

    Ultrasonic sensors emit ultrasonic pulses, and by measuring the time of ultrasonic pulse reaches the object and back to the transducer, the distance of sensor from the target object is calculated. ...

  • Waterproof Ultrasonic Sensor with Separate Probe

    Most ultrasonic distance sensors aren't waterproof which can be a problem if you need your project to withstand the elements outdoors. No need to worry any more! This is a waterproof & ultrason...

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare
x