Skip to content
Seeed

Seeed

  • Sold out
    €24,00

    It is based on the sensor module LSM303D which has a selectable linear acceleration scale range of ±2 / ±4 / ±8 / ±16 g and a selectable magnetic field scale range of ±2 /±4 / ±8 / ±12 gauss. Booth these scales are what are referred to a “full” scale. The magnetic sensor and the accelerometer can...

    View full details
  • €11,20

    This 3-Axis Digital Accelerometer(±16g) is based on the low power consuming IC ADXL345. It features up to 10,000g high shock survivability and has a configurable samples per second rate. For applications that don’t require too large measurement range, this is a great choice because it’s durable, ...

    View full details
    €11,20
  • Sold out
    €30,60

    The kit uses JGA25 DC geared motors and optical encoders for higher motor control accuracy and double-layer acrylic plates for easy placement of sensors and development boards. With this kit you can assemble your balance car, a mini Segway, or your personal project. Select the right sensor and d...

    View full details
  • €12,30

    This device is based on SI1145, a new sensor from SiLabs. The Si1145 is a low-power, reflectance-based, infrared proximity, UV index and ambient light sensor with I2C digital interface and programmable-event interrupt output. This device offers excellent performance under a wide dynamic range and...

    View full details
    €12,30
  • Sold out
    €13,77

    It is suitable for detecting Alcohol, Benzine, CH4, Hexane, LPG, CO. Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer. Note: The sensor value only reflects the approximated ...

    View full details
  • Sold out
    €7,93

    It is built with MQ303A semiconductor alcohol sensor. It has good sensitivity and fast response to alcohol, making it suitable for building a breathalyzer. This Grove module implements all the necessary circuitry for the MQ303A, such as power conditioning and heater power supply. This sensor outp...

    View full details
  • Sold out
    €8,40

    Contrast to the ordinary relay, this latching relay does not need continuous power to keep the state, only a rising/falling pulse is needed to change the work state. The power can even be removed when the work state do not need to change, making the module especially suitable for low-power projec...

    View full details
  • Sold out
    €7,60

    Breadboard 1 pin dual-male jumper wire 75pcs pack. The pack comes with 2 different lengths: 200mm (25pcs) and 100mm(50pcs). Perfect design and adequate quality for breadboard and Arduino connection, you can use it over and over again!

x