Skip to content
Sensors & Environment

Sensors & Environment

  • Sold out
    €95,00

    Nicla Vision allows you to build your next smart project. Ever wanted an automated house? Or a smart garden? Well, now it’s easy with the Arduino IoT Cloud compatible boards. It means: you can connect devices, visualize data, control and share your projects from anywhere in the world. Whether you...

    View full details
  • €66,50

    The Nicla Sense ME is a tiny, low-power tool that sets a new standard for intelligent sensing solutions. With the simplicity of integration and scalability of the Arduino ecosystem, the board combines four state-of-the-art sensors from Bosch Sensortec: BHI260AP motion sensor system with integr...

    View full details
    €66,50
  • €28,50

    The Arduino Sensor Kit is made for Makers who have just started using Arduino to explore the vast space of electronics and programming. This kit teaches how to connect and program basic Grove modules that includes both sensors and actuators. Grove is an open-source, modulated, and ready-to-use ...

    View full details
    €28,50
  • €69,00

    Do you ever worry about the air quality at home or in your DIY lab in the middle of 3d printers, saw, cnc and lasercutter?  The long-lasting DIY air quality station is coming to town! Build it, put it in your favourite place, your home, your lab, and start sensing! Add your creativity to add a ni...

    View full details
    €69,00
  • Sold out
    €8,40

    Grove - DPS310 is a high precision barometric pressure sensor, it can measure air pressure change caused by height changes in the centimeter level. Typical Applications: Indoor Navigation (floor detection e.g. in shopping malls and parking garages) Health and Sports (accurate elevation gain ...

    View full details
  • €12,60

    Provide reliable data for air purifier system Easy maintenance PWM output Grove compatible interface Compact and light design. This Dust Sensor gives a good indication of the air quality in an environment by measuring the dust concentration. The Particulate Matter level (PM level) in the air is ...

    View full details
    €12,60
  • €67,70

    DFRobot Gravity: analog electrical conductivity meter V2 is specially used to measure the electrical conductivity of an aqueous solution, and then to evaluate the water quality, which is often used in water culture, aquaculture, environmental water detection, and other fields. You may also check ...

    View full details
    €67,70
  • €34,40

    These sensors are of the latest generation and measure: Atmospheric pressure Temperature and humidity Light intensity (in LUX, max 650) To help you build projects and store the data collected locally, this shield has a slot for a microSD card (not provided). There is a ready to use librar...

    View full details
    €34,40
  • €57,60

    HuskyLens is an easy-to-use AI machine vision sensor. It is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, color recognition, and tag(QR code) recognition. Through the UART / I2C port, HuskyLens can connect yout Arduino board lik...

    View full details
    €57,60
  • €54,60

    Great and powerful sensor for everyone that wants to know the exact concentration of CO2(Carbon Dioxide) in the air.  This is the first CO2 sensor compatible with Arduino. The output voltage of the module falls as the concentration of the CO2 increases. The potentiometer onboard is designed to s...

    View full details
    €54,60
  • Sold out
    €5,80

    This soil Moisture sensor is made of a corrosion resistant material giving it a long service life. Insert it into soil and impress your friends with the real-time soil moisture data! The product includes an on-board voltage regulator which gives it an operating voltage range of 3.3 ~ 5.5V. It is ...

    View full details
  • €3,40

    The sensor traces have a weak pull-up resistor of 1 MΩ. The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the grounded trace. Believe it or not this circuit will work with the digital I/O pins of your Arduino or you can use it with the analog pins...

    View full details
    €3,40
  • €4,20

    It can detect the change in capacitance when a finger is nearby. This means no matter if your finger directly touches the pad or just stays close to the pad, the Grove - Touch Sensor will output HIGH.  

    €4,20
  • €3,20

    The resistance of a thermistor will increase when the ambient temperature decreases. It’s this characteristic that we use to calculate the ambient temperature. The detectable range of this sensor is -40 - 125ºC, and the accuracy is ±1.5ºC

    €3,20
  • Sold out
    €10,70

    Grove-Temperature & Humidity Sensor Pro is a high accuracy temperature and humidity sensor based on the DHT22 module (also known as AM2302 or RHT03). High-cost performance and high precision make it ideal for temperature and humidity monitoring of Arduino and Raspberry Pi, you can also use it...

    View full details
  • €12,80

    The sensor(chip) used in the module is designed with Sensirion’s CMOSens® technology. The chip is well calibrated, linearized and compensated for digital output. The typical accuracy of this module can be ±2%RH (for relative humidity) and ±0.3°C (for temperature). This module is compatible with ...

    View full details
    €12,80
  • Sold out
    €12,30

    This is a multifunctional sensor that gives you temperature and relative humidity information at the same time. It utilizes a TH02 sensor that can meet measurement needs of general purposes. It provides reliable readings when environment humidity condition inbetween 0-80% RH, and temperature con...

    View full details
  • Sold out
    €18,30

    This module can be used to measure temperature, atmospheric pressure and humidity accurately and fast. As the atmospheric pressure changes with altitude, it can also measure approximate altitude of a place. It can be connected to a microcontroller with I2C (integrated with Grove socket) or throug...

    View full details
  • Sold out
    €11,80

    This device is based on SI1145, a new sensor from SiLabs. The Si1145 is a low-power, reflectance-based, infrared proximity, UV index and ambient light sensor with I2C digital interface and programmable-event interrupt output. This device offers excellent performance under a wide dynamic range and...

    View full details
  • €5,30

    The main component of the module is a simple microphone, which is based on the LM386 amplifier and an electret microphone. This module’s output is analog and can be easily sampled and tested by an Arduino. Features: Easy to use Provides analog output signal Easily integrates with Logic modu...

    View full details
    €5,30
  • €3,20

    Through it, you can control a circuit of high voltage with low voltage, say 5V on the controller. There is an indicator LED on the board, which will light up when the controlled terminals get closed.

    €3,20
  • €9,20

    Simply connect it to Grove - Base shield and program it, when anyone moves in its detecting range, the sensor will output HIGH on its SIG pin. Features: Grove compatible interface Adjustable detecting distance Adjustable holding time

    €9,20
  • Sold out
    €5,70

    This sensor is very simple to use, you insert in into the soil and read the data. With this sensor in the right project, your plants can let you know when it's time to water them. Features: Soil moisture sensor based on soil resistivity measurement Easy to use 2.0 cm X 6.0 cm grove module

  • €3,20

    The resistance of photoresistor decreases when the intensity of light increases. A dual OpAmp chip LM358 on board produces voltage corresponding to intensity of light(i.e. based on resistance value). The output signal is an analog value, the brighter the light is, the larger the value. This modul...

    View full details
    €3,20
  • Sold out
    €6,40

    The module consists of an IR LED and a photosensor (phototransistor) pair. The light emitted by the IR LED gets reflected by any object placed in front of the sensor and this reflection is detected by the photosensor(phototransistor). Any white (or lighter) colored surface reflects more than blac...

    View full details
  • €5,30

    The sensor consists of an IR LED and a photo sensor (phototransistor). The light emitted by the IR LED gets reflected by any object placed in front of the sensor and this reflection is detected by the photo sensor (phototransistor). Any white (or lighter) colored surface reflects more than black ...

    View full details
    €5,30
  • €6,50

    There is a continuous-time switch on this Grove module. The output from the module switches from low (turns on) when a magnetic field (south polarity) is perpendicular to the Hall sensor and when it passes the operate point threshold BOP it switches to high (turns off) when the magnetic field dis...

    View full details
    €6,50
  • Sold out
    €74,70

    You can see the current oxygen concentration from reading the voltage values output proportional to the concentration of oxygen on the oxygen concentration linear characteristic graph. It’s suitable for detecting oxygen concentration in the environment. Grove - Gas Sensor(O2) is an organic reacti...

    View full details
  • €11,50

    Different from traditional analog light sensor, as Grove - Light Sensor, this digital module features a selectable light spectrum range due to its dual light sensitive diodes: infrared and full spectrum.You can choose among three detection modes when taking your readings. There is infrared mode, ...

    View full details
    €11,50
  • €11,50

    This sensor is designed for comprehensive monitor over indoor air condition. It's responsive to a wide scope of harmful gases, as carbon monoxide, alcohol, acetone, thinner, formaldehyde and so on. Due to the measuring mechanism, this sensor can't output specific data to describe target gases' co...

    View full details
    €11,50
  • Sold out
    €15,20

    This sensor SharpGP2Y0A21YK, boasts a small package and very low current consumption, takes a continuous distance reading and returns a corresponding analog voltage with a range of 10cm (4") to 80cm (30"). It can be used in TVs, personal computers, cars and so on. Features: Grove interface co...

    View full details
  • Sold out
    €12,80

    It has a low power consumption digital chip LSM6DS3 and power supply regulator which features high sensitivity and low noise interference. It can be configured to different levels of sensitivity to acceleration and can use different ranges of angular rate measurement. It is provided with a detail...

    View full details
  • Sold out
    €23,00

    It is based on the sensor module LSM303D which has a selectable linear acceleration scale range of ±2 / ±4 / ±8 / ±16 g and a selectable magnetic field scale range of ±2 /±4 / ±8 / ±12 gauss. Booth these scales are what are referred to a “full” scale. The magnetic sensor and the accelerometer can...

    View full details
  • €60,40

    Professional pH Sensor Meter Kit with industrial electrode. It has built-in simple, convenient, practical connection and long life (up to 1 year), which makes it very suitable for long term online monitoring. It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor inter...

    View full details
    €60,40
  • €28,80

    Analog pH Sensor / Meter Kit specially designed for Arduino controllers and has convenient and practical "Gravity" connector and a bunch of features. Instant connection to your probe an your Arduino to get pH measurements at ± 0.1pH (25 ℃). For most hobbyist this great accuracy range and it's low...

    View full details
    €28,80
  • €125,70

    Go interactive with your applications with this new sensor kit! 37 sensors are included in one kit, which definitely gives you a bigger bang for your buck. In the version of this sensor kit, we add more sensor modules like, color sensor, digital wattmeter, heart rate monitor sensor, conductivity...

    View full details
    €125,70
x