Skip to content
To Create

To Create

Unleash your creativity and build amazing projects with our best selection of products! 

  • €50,00

    1. Choose the amount, be generous! Everybody has a friend that's going crazy for Home Automation solutions. What? Uh, also your friends are crazy for it? So this is the time to gift them with an Oplà IoT kit, or just take a look to our Under 50€ guide and make the Arduino Uno yours for 20€. And i...

    View full details
    €50,00
  • €26,30

    The MKR ZERO brings you the power of a Zero in the smaller format established by the MKR form factor. The MKR ZERO board acts as a great educational tool for learning about 32-bit application development. It has an on-board SD connector with dedicated SPI interfaces (SPI1) that allows you to play...

    View full details
    €26,30
  • €131,10

    Go interactive with your applications with this new sensor kit! 37 sensors are included in one kit, which definitely gives you a bigger bang for your buck. In the version of this sensor kit, we add more sensor modules like, color sensor, digital wattmeter, heart rate monitor sensor, conductivity...

    View full details
    €131,10
  • €8,40

    Now you can connect your Arduino boards with the official Arduino USB Cable. Through a USB-C to USB-C with a USB-A adapter connection, this data USB cable can easily connect your Arduino boards with your chosen programming device. The Arduino USB Cable has a nylon braided jacket in white and tea...

    View full details
    €8,40
  • €22,80

    Extremely flexible, even after folded it always returns to its original shape. Dimensions 450 x 300 mm. Make your soldering and repair work easy with this multifunctional mat. ESD-Safe Heat-resistant up to 500°C Pliable, returns to its original shape 3x Small storage boxes and 3x magnetic a...

    View full details
    €22,80
  • €10,80

    Extremely flexible, even after folded it always returns to its original shape. Dimensions 337 x 227 mm.

    €10,80
  • €262,80

    Need a free hand to hold onto all those techy bits and pieces? Then the Braccio Bundle is perfect for you! With the Arduino Uno-controlled Braccio robotic arm, you can unlock the unlimited possibilities of robotics or simply use it to take the perfect selfie. 1 x TinkerKit Braccio Robot - Des...

    View full details
    €262,80
  • €94,80

    Beyond the Grove Shield is a bunch of Grove sensors and actuators with build-in Grove interfaces, makes your prototyping faster and easier. Simply plug in the modules and you are ready to create. Features: Various sensors and actuators Plug-and-play modules Works on a variety of Arduino-com...

    View full details
    €94,80
  • €75,50

    The Arduino MKR Vidor 4000 brings Arduino's ease of use to the work with the most powerful reprogrammable chips that exist: FPGAs. With Vidor you can create a board where all pins are PWM signals controlling the speed of motors. You can capture sound in real time and make a sound effect pedal for...

    View full details
    €75,50
  • €19,10

    DYNAMIXEL Shield for Arduino MKR allows users to easily use ROBOTIS’ DYNAMIXEL Series along with Arduino MKR Boards. The features are as follows: Compatible with Arduino MKR Compatible with ROBOTIS DYNAMIXEL TTL Series (Discontinued DYNAMIXEL may not be supported) For 12V DYNAMIXEL power su...

    View full details
    €19,10
  • Sold out
    €57,60

    Open Programmable IoT Platform - build your own custom home or office automation devices. Control what you want, how you want to. The MKR IoT Carrier provides infinite possibilities for IoT projects. No soldering required! The integrated sensors, circuits and display leave you free to focus on...

    View full details
  • Sold out
    €6,00

    Feetech Micro 1.8kg.cm Metal Gears Analog Servo

  • Sold out
    €44,40

    The J-Link 19-pin Cortex-M Adapter may also be used to connect J-Link to a non Cortex-M target as far as the target connector uses the same pinout as shown below. By default, TRST is not connected, but the Cortex-M Adapter comes with a solder bridge (NR1) which allows TRST to be connected to pin ...

    View full details
  • Sold out
    €35,30

    *The boards and shields in the pictures are not included. At the heart of the enclosure is an additional PCB with an integrated voltage regulator (soldering required) and prototyping area. This PCB comes with slots for the Arduino MKR or Portenta H7 board, an MKR Shield and an additional MKR Eth...

    View full details
  • Sold out
    €14,10

    Feetech 9kg Torque analog servo - Standard RC Metal Gear Servo Motor: A servo motor is a rotary or linear drive that allows precise control of angle or linear position, speed and acceleration.  It consists of a suitable motor coupled with a sensor for position feedback.  Servo motors are widely u...

    View full details
  • Sold out
    €30,60

    The kit uses JGA25 DC geared motors and optical encoders for higher motor control accuracy and double-layer acrylic plates for easy placement of sensors and development boards. With this kit you can assemble your balance car, a mini Segway, or your personal project. Select the right sensor and d...

    View full details
  • €9,50

    The MKR Proto Large Shield fits onto your MKR board using its provided female/male headers and enables you to fix it wherever you want with the mounting holes. This shield features a larger prototyping area with more than 300 solder points and makes connecting components to your board super simpl...

    View full details
    €9,50
  • Save 20%
    Original price €168,00
    Current price €134,40

    MAKERphone is an educational device shaped like a mobile phone. Its purpose: to motivate people to explore, learn and create something new in a fun and interesting way. Who is this kit for? Based on our experience, an 11-year-old kid should be able to assemble a MAKERphone kit with a tiny bit ...

    View full details
    Original price €168,00
    Current price €134,40
  • Save 20%
    Original price €139,20
    Current price €111,36

    MAKERphone is an educational device shaped like a mobile phone. Its purpose: to motivate people to explore, learn and create something new in a fun and interesting way. Who is this kit for? Based on our experience, an 11-year-old kid should be able to assemble a MAKERphone kit with a tiny bit ...

    View full details
    Original price €139,20
    Current price €111,36
x