Overview
Different from traditional analog light sensor, as Grove - Light Sensor, this digital module features a selectable light spectrum range due to its dual light sensitive diodes: infrared and full spectrum.
You can choose among three detection modes when taking your readings. There is infrared mode, full spectrum and human visible mode. When running under the human visible mode, this sensor will give you readings within the range of light spectrum that the eye can pick up.
Features
-
Selectable detection modes
-
High resolution 16-Bit digital output at 400 kHz I2C Fast-Mode
-
Wide dynamic range: 0.1 - 40,000 LUX
-
Wide operating temperature range: -40°C to 85°C
-
Programmable interrupt function with User-Defined Upper and lower threshold settings
Tech specs
Specifications
|
Items |
Min |
Typical |
Max |
Unit |
|
Supply voltage, VDD |
3.3 |
5 |
5.1 |
V |
|
Operating temperature |
-30 |
\ |
70 |
℃ |
|
SCL,SDA input low voltage |
-0.5 |
\ |
0.8 |
V |
|
SCL,SDA input high voltage |
2.3 |
\ |
5.1 |
V |
Get Inspired
Easy data logging with grove sensors using the MKR Connector Carrier and MKR boards
Getting started with electronics and sensing the world around you is now easier than ever with the new all-in-one Arduino Sensor Kit from Arduino, in partnership with Seeed. The 10 most popular modules and sensors for your Arduino UNO have been integrated onto a single board, providing plug-and-play convenience without the need for any soldering or wiring! Combining basic Grove sensors and actuators for the Arduino UNO, the kit contains a base shield featuring the following modules that can be connected either through the digital, analog, or I2C connectors: An OLED screen4 digital modules (LED, button, buzzer and potentiometer)5 sensors (light, sound, air pressure, temperature, and accelerometer) Just plug the Arduino Sensor Kit into the Arduino UNO, then you're ready to follow the Plug, Sketch & Play online lessons that make getting started a breeze. The kit is equipped with 16 Grove connectors, which when placed on the board, offer functionality to the various pins. With seven digital connections, four analog connections, four I2C connections, and a UART connection, the base shield can be easily mounted onto an Arduino UNO board and programmed through the Arduino IDE. Now available from the Arduino Store, the Arduino Sensor Kit comes as a standalone kit for only €23.00 / US$25.00, or can be purchased with the Arduino UNO Rev3 board as a great value bundle for €38.70 / US$39.80. For more details, check out our website here.
