Skip to content
Free shipping on orders over 90€ to Austria, France, Germany, Italy, and Spain!*
Free shipping on orders over 90€ to Austria, France, Germany, Italy, and Spain!*

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00
Take on the challenge of DIY

Take on the challenge of DIY

For the Arduino fans who are ready to make something new:
choose a kit with step-by-step instructions and all the components to build a fun and festive project, laughing (and learning) all the way.

Take on the challenge of DIY

For the Arduino fans who are ready to make something new:
choose a kit with step-by-step instructions and all the components to build a fun and festive project, laughing (and learning) all the way.

Take on the challenge of DIY

  • J-Link EDU Mini classroom package

    Get the J-Link EDU Mini, offering the same functionality as the J-Link EDU but in a reduced form factor. The J-Link EDU Mini Classroom Edition includes twelve J-Link EDU Mini units on special offer...

  • J-Link PLUS Compact

    Get the SEGGER J-Link PLUS Compact debug probe: a compact version of the J-Link PLUS. Mounts securely & unobtrusively into development and end user equipment. Based on 32-bit RISC CPU, it commu...

  • J-Link 19-pin Cortex-M Adapter

    The J-Link 19-pin Cortex-M Adapter may also be used to connect J-Link to a non Cortex-M target as far as the target connector uses the same pinout as shown below. By default, TRST is not connected,...

  • Grove - I2C Hub (6 Port)

    We've already released the Grove - I2C Hub (4 Port), now comes the 6 port version, the same size, two more connectors, almost half the price! As you may know, the 7 address length I2C bus allows up...

  • Mates Stand

    The Mates Stand offers a simple connection for a MatesBUS compatible device, such as the TIMI-96. It eases development by propping the MatesBus compatible device up on an angle (35 degrees off vert...

  • TS80P (more) Soldering Iron (EU)

    TS80P controller is made of aluminum alloy through CNC into a compact structure and high-tech design, ergonomic, beautiful and fashionable. S80P is a smart soldering iron powered by USB Type-C® PD...

  • TS100 Power Supply (EU)

    Power Supply for TS100 Soldering Iron

  • L298 driver for DC/Stepper motors

    Based on the ST L298N chip, this module is designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC motors, and stepper motors. It has the ability to re...

  • Microwave motion radar

    The RCWL-0516 is particularly suitable as an alternative to using a PIR motion sensor. When it detects a moving object, the output changes from a low logic level to a high level (3.3 volts). Approp...

  • Ring with 16 RGB WS2812 LEDs and integrated driver

    The data channel for communication is a One-Wire serial type and can be controlled with microcontrollers like Arduino. You can set the refresh frequency as desired to make certain light effects imp...

  • Ring with 24 RGB WS2812 LEDs and integrated driver

    The data channel for communication is a One-Wire serial type and can be controlled with microcontrollers like Arduino.  You can set the refresh frequency as desired to make certain light effects i...

  • Ring with 60 RGB WS2812 LEDs and integrated driver

    The data channel for communication is a One-Wire serial type and can be controlled with microcontrollers like Arduino. You can set the refresh frequency as desired to make certain light effects im...

  • Set of 70 assorted color 5mm LEDs

    A set consisting of 10 blue 5 mm LEDs, 10 green, 10 red, 10 yellow, 10 white, 10 common anode RGB and 10 common anode bicolour (red-green) LEDs.

  • Neopixel Stick with 8 RGB WS2812 LEDs and integrated driver

    Stick with Neopixel technology with 8 RGB LEDs that can be individually managed, each of which can produce 256 shades of its own color, determining a total of 16,777,216 colors. The data channel f...

  • Digital control soldering station

    Soldering station with digital temperature control between 160°C and 480°C and indication through display.

  • 30 watt stylus soldering iron

    Particularly suitable for making soldering in various applications. Power supply 230 Vac.

  • Benchtop solder fume extractor - 23W

    It eliminates harmful welding fumes, various resins and pyrograph fumes from the workstation. It can be easily adjusted in several positions to ensure optimal smoke extraction. It comes complete wi...

  • Aluminum and ABS soldering iron pump

    Solder sucker pump made of aluminum and ABS. Length 194 mm, diameter 20 mm. Teflon tip.

  • Board clamping support

    Lightweight and easy to carry, this product has also small knobs to adjust the distance between the two arms with the clamps.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare