Skip to content
Free shipping on orders over 90€ to Austria, France, Germany, Italy, and Spain!*
Free shipping on orders over 90€ to Austria, France, Germany, Italy, and Spain!*

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00
Internet of Things

Internet of Things

Unlock the Future with Arduino IoT: Connect, Control, and Create in the Digital Age Immerse yourself in a collection of innovative tools and components designed to seamlessly bridge the gap between the physical and digital worlds.

Internet of Things

Unlock the Future with Arduino IoT: Connect, Control, and Create in the Digital Age Immerse yourself in a collection of innovative tools and components designed to seamlessly bridge the gap between the physical and digital worlds.

Internet of Things

  • Rock 3 Model C 1GB

    The OKdo ROCK 3 Model C (ROCK 3C) is a dependable single board computer based on the powerful Rockchip RK3566 SoC in an ultra-small form factor. Despite its compact size, it’s packed with remarka...

  • 2MP GC2145 Color DVP Camera Module for Arduino GIGA R1 WiFi Board

    This camera is based on GC2415 Color rolling shutter image sensor. The GC2145 incorporates a 1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal processor. The 2MP GC2145 camera ...

  • Grove Starter Kit Plus - IoT Edition

    Beyond the Grove Shield is a bunch of Grove sensors and actuators with build-in Grove interfaces, makes your prototyping faster and easier. Simply plug in the modules and you are ready to create. ...

  • Female Headers 14 ways Arduino MKR1000 Printed

    14 pin Female Headers MKR1000 printed, we use them extensively on Large MKR Proto Shield PCB. Features: Receptacle Style: Square Number of Ways/Pins: 14 Pin Spacing: 2.54 mm Component Height: Plast...

  • Arduino MKR 485 Shield

    Thanks to this shield, you can now connect your MKR board to any of the industrial systems that using the RS 485 protocol. The MKR 485 shield is the ultimate expansion that allows MKR boards to ...

  • Arduino MKR Motor Carrier

    The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier can also be used to connect other actuators and sensors via a series of 3-pin male header...

  • Arduino Nano 33 BLE

    The Nano 33 BLE (without headers) is Arduino’s 3.3V compatible board in the smallest available form factor: 45x18mm! The Arduino Nano 33 BLE is a completely new board on a well-known form factor. ...

  • Arduino Explore IoT Kit

    The IT skills gap is growing. Topping employers’ list of concerns is a lack of IT skills in emerging technologies, such as the Internet of Things. Learning IoT skills now, using advanced industr...

  • J-Link 19-pin Cortex-M Adapter

    The J-Link 19-pin Cortex-M Adapter may also be used to connect J-Link to a non Cortex-M target as far as the target connector uses the same pinout as shown below. By default, TRST is not connected,...

  • Breadboard 100x50

    100 x 50 mm through hole board PCB

  • Arduino MKR1000 WIFI

    Arduino MKR1000 has been designed to offer a practical and cost effective solution for makers seeking to add Wi-Fi connectivity to their projects with minimal previous experience in networking. I...

  • Arduino MKR1000 WIFI with Headers Mounted

    Arduino MKR1000 has been designed to offer a practical and cost effective solution for makers seeking to add Wi-Fi connectivity to their projects with minimal previous experience in networking. I...

  • Arduino Yún Rev 2

    The Yún rev. 2 with the power of a Linux based system that enables advanced network connections and applications. Connection to your WiFi or wired network is simple thanks to the Yún Web Panel and ...

  • Arduino MKR Vidor 4000

    The Arduino MKR Vidor 4000 brings Arduino's ease of use to the work with the most powerful reprogrammable chips that exist: FPGAs. With Vidor you can create a board where all pins are PWM signals c...

  • Arduino Nano 33 BLE Sense

    Check the new version of the Arduino Nano 33 BLE Sense: Arduino Nano 33 BLE Sense Rev2 and Arduino Nano 33 BLE Sense Rev2 with headers   The Nano 33 BLE Sense (without headers) is Arduino’s 3.3V A...

  • Arduino Nano 33 BLE Sense with headers

    Check the new version of the Arduino Nano 33 BLE Sense: Arduino Nano 33 BLE Sense Rev2 and Arduino Nano 33 BLE Sense Rev2 with headers The Nano 33 BLE Sense (with headers) is Arduino’s 3.3V AI en...

  • Arduino MKR WAN 1300 (LoRa® connectivity)

    Arduino MKR WAN 1300 has been designed to offer a practical and cost effective solution for makers seeking to add LoRa® connectivity to their projects with minimal previous experience in networki...

  • 14.5mm Strip 10 ways 2 pcs

    Pair of 10 pin Female/Male header strips, very useful for board extensions. We use them extensively on Proto Shield PCB, but they are useful in any shield because of their height. Features: Rec...

  • Arduino MKR IoT Carrier

    Open Programmable IoT Platform - build your own custom home or office automation devices. Control what you want, how you want to. The MKR IoT Carrier provides infinite possibilities for IoT proj...

  • J-Link EDU Mini classroom package

    Get the J-Link EDU Mini, offering the same functionality as the J-Link EDU but in a reduced form factor. The J-Link EDU Mini Classroom Edition includes twelve J-Link EDU Mini units on special offer...

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare