This monocrystalline photovoltaic panel is ideal for charging batteries, smartphones, robotics.  

A photovoltaic solar panel with extremely small dimensions, ideal for conducting experiments with solar energy.

This Power Module is a small size 5A 350KHz 25V Buck DC to DC Converter. It can convert any DC voltage between 3.6V-25V to a selectable voltage from 3.3V to 25V. You can choose 5V direct output vol...

DC/DC Step-Down converter that allows to convert a continuous voltage input between 5 and 32 volts into an output voltage from 1.2 to 30 volts (adjustable via trimmer). The maximum available curre...

This is a small breadboard (4,6x3,6 cm) with 170 tie points. It is self-adhesive and compatible with the Arduino Proto Shield.

150x90 mm through hole board PCB

This Solar lipo charger is designed for single Lithium battery (3.7V) for intelligent charging, with input reverse polarity protection. The maximum charging current is 500 milliamperes and the con...

Most ultrasonic distance sensors aren't waterproof which can be a problem if you need your project to withstand the elements outdoors. No need to worry any more! This is a waterproof & ultrason...

With this RGB and Gesture sensor, you will be able to control a computer, microcontroller, robot, and much more with a simple hand gesture! The usage pins are as follows: VL (optional IR LED power...

Grove - DPS310 is a high precision barometric pressure sensor, it can measure air pressure change caused by height changes in the centimeter level. Typical Applications: Indoor Navigation (floo...

The board includes a Nuvoton ISD9160, a microphone, 1 SPI flash, 1 grove connector, 1 speaker connector and 1 led to show to your voice activity. Nuvoton ISD9160 is (SoC) Chipcorder that based on ...

The Arduino UNO R4 WiFi combines the processing power and exciting new peripherals of the RA4M1 microcontroller from Renesas with the wireless connectivity power of the ESP32-S3 from Espressif. On ...

Introduction The Education Shield is a custom-made shield designed by Arduino Education, specially tailored for educational purposes to enable quick and easy learning while building projects. The s...

These are a long flexible jumpers wires of 150 mm with a male connectors on the ends. They are perfect to use to make projects with your Arduinos and breadboard.

The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and applica...

Stereo Enclosed Speaker is a new passive speaker with JST PH2.0 interface. It is a perfect option for any DIY audio project which requires an 8 ohm impedance and 3W power. The suitable size and scr...

Dimensions: 82 x 55 mm.  White color.

This is a 840-point experimental ABS board with a self-adhesive base. Dimensions (mm): 174x66,5x8,5 mm Weight: 100 grams.

This is a Bluetooth 4.0 (Low Energy) module compliant with ISM 2.4 GHz, with master/slave mode of operation and transparent data transmission, based on the Texas Instruments CC2541 chip with 256K F...

Contents of the package: 25 pieces - 0 Ohm 25 pieces - 10 Ohm 25 pieces - 20 Ohm 25 pieces - 47 Ohm 25 pieces - 470 Ohm 25 pieces - 2.2 KOhm 25 pieces - 4.7 KOhm 25 pieces - 22 KOhm 25 p...

Based on the ST L298N chip, this module is designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC motors, and stepper motors. It has the ability to re...