Skip to content

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00

DC/DC Step-Down converter with 1.2-30 V 5A output

SKU TPX00183 Barcode 7630049204485 Show more
Original price €0
Original price €6,61 - Original price €6,61
Original price
Current price €6,61
€6,61 - €6,61
Current price €6,61
VAT included

DC/DC Step-Down converter.

Overview

DC/DC Step-Down converter that allows to convert a continuous voltage input between 5 and 32 volts into an output voltage from 1.2 to 30 volts (adjustable via trimmer).

The maximum available current is about 5 A.


Tech specs

  • Input voltage: from 5 Vdc to 32 Vdc
  • Output voltage: from 1.2 Vdc to 30 Vdc (adjustable)
  • Output current: 5 A
  • Conversion efficiency: 90%
  • Output ripple: 50 mV (max)
  • Dimensions (mm): 51×26.3×14
  • Operating temperature: from -40°C to +85°C

Conformities

The following Declarations of Conformities have been granted for this board:
CE
For any further information about our certifications please visit docs.arduino.cc/certifications

Get Inspired

PROJECT HUB
Claw prosthesis controlled by myoelectric sensor
Claw prosthesis controlled by myoelectric sensor
Project Tutorial by luiz_coppini

Print a claw on your 3D printer and use a myoelectric sensor to control it.

read more
BLOG
Your Arduino Nano ESP32 can run Doom
Your Arduino Nano ESP32 can run Doom
September 12, 2023

"But can it run Doom?" is more than just a joke in the tech world. It is also a decent litmus test for the computing power of hardware. That test isn't very relevant for modern computers, but it is still worth asking when discussing microcontrollers. Microcontrollers vary in dramatically in processing power and memory, with models to suit every application. But if you have an Arduino Nano ESP32 board, you can run Doom as Naveen Kumar has proven. The Nano ESP32 is a small IoT development board for the ESP32-S3 microcontroller, featuring Wi-Fi® and Bluetooth® connectivity. It also has a relatively high clock speed and quite a lot of memory: 240MHz and 512kB SRAM, respectively. That still isn't enough to meet the requirements of the original Doom release, which needed a lot more RAM. But Kumar demonstrates the use of an MCU-friendly port that runs well on this more limited hardware. Want to give it a try yourself? You'll need the Nano ESP32, an Adafruit 2.8" TFT LCD shield, an M5Stack joystick, a Seeed Studio Grove dual button module, a breadboard, and some jumper wires to create a simple handheld console. You'll have to compile and flash the Retro-Go firmware, which was designed specifically for running games like Doom on ESP32-based devices. You can then load the specialized WAD (Where's All the Data) files. Kumar reports an average frame rate at a 320×240 resolution, which is very playable.

read more

Inspired by your shopping trends

  • DC/DC converter with adjustable 1.5-35V output

    Step-Down DC/DC switching converter, with particularly small dimensions (48.35 x 23.35 x 14 mm), capable of converting a DC voltage between 3 and 40 volts into an output voltage from 1.5 to 35 volt...

  • DC/DC Step-up converter with 4-30V output

    DC/DC step-up converter with particularly small dimensions (51 x 21.5 x 13 mm), capable of converting a DC voltage between 3.5 and 30 volts into an output voltage from 4 to 30 volts (adjustable via...

  • 5.5 V 1 watt solar panel

    Output voltage: 5.5 V, maximum current: 170 mA, connection: red-black cable with JST connector.

  • Speed control for DC motors from 3 to 35V 5A

    Also ideal for adjusting the brightness of LED lights and strips.

Compare products

0 of 3 items selected

Select first item to compare

Select second item to compare

Select third item to compare

Compare