Arduino Nano 33 BLE Rev2 with headers
Introducing the Arduino Nano 33 BLE Rev2, a cutting-edge development board powered by the nRF52840 from Nordic Semiconductors. With a 32-bit Arm® Cortex®-M4 CPU running at 64 MHz, this board boasts Bluetooth® LE capabilities for seamless data sharing with other Bluetooth® LE-enabled devices. Additionally, it supports MicroPython for enhanced flexibility in programming.
Overview
The Arduino Nano 33 BLE Rev2 stands at the forefront of innovation, leveraging the advanced capabilities of the nRF52840 microcontroller. This 32-bit Arm® Cortex®-M4 CPU, operating at an impressive 64 MHz, empowers developers for a wide range of projects. The added compatibility with MicroPython enhances the board's flexibility, making it accessible to a broader community of developers.
The standout feature of this development board is its Bluetooth® Low Energy (Bluetooth® LE) capability, enabling effortless communication with other Bluetooth® LE-enabled devices. This opens up a realm of possibilities for creators, allowing them to seamlessly share data and integrate their projects with a wide array of connected technologies.
Designed with versatility in mind, the Nano 33 BLE Rev2 is equipped with a built-in 9-axis Inertial Measurement Unit (IMU). This IMU is a game-changer, offering precise measurements of position, direction, and acceleration. Whether you're developing wearables or devices that demand real-time motion tracking, the onboard IMU ensures unparalleled accuracy and reliability.
In essence, the Nano 33 BLE Rev2 strikes the perfect balance between size and features, making it the ultimate choice for crafting wearable devices seamlessly connected to your smartphone. Whether you're a seasoned developer or a hobbyist embarking on a new adventure in connected technology, this development board opens up a world of possibilities for innovation and creativity. Elevate your projects with the power and flexibility of the Nano 33 BLE Rev2.
Tech specs
| Microcontroller | nRF52840 (datasheet) | |
| USB connector | Micro USB | |
| Pins | Built-in LED Pin | 13 |
| Digital I/O Pins | 14 | |
| Analog Input Pins | 8 | |
| PWM Pins | All digital pins (4 at once) | |
| External interrupts | All digital pins | |
| Connectivity | Bluetooth® | u-blox® NINA-B306 |
| Sensors | IMU | BMI270 (3-axis accelerometer + 3-axis gyroscope) + BMM150 (3-axis Magnetometer) |
| Communication | UART | RX/TX |
| I2C | A4 (SDA), A5 (SCL) | |
| SPI | D11 (COPI), D12 (CIPO), D13 (SCK). Use any GPIO for Chip Select (CS) | |
| Power | I/O Voltage | 3.3 V |
| Input Voltage (nominal) | 5-18 V | |
| DC Current per I/O Pin | 10 mA | |
| Clock Speed | Processor | nRF52840 64 MHz |
| Memory | nRF52840 | 256 KB SRAM, 1 MB flash |
| Dimensions | Weight | 5 gr |
| Width | 18 mm | |
| Length | 45 mm | |
Resources for Safety and Products
Manufacturer Information
The production information includes the address and related details of the product manufacturer.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
https://www.arduino.cc/
Responsible Person in the EU
An EU-based economic operator who ensures the product's compliance with the required regulations.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
Phone: +39 0113157477
Email: support@arduino.cc
Documentation
Learn more
Get Inspired
This year’s Arduino Day, held on March 16th, consisted of 659 celebrations across 106 countries with talks, project exhibitions, open activities, workshops, live demos, hackathons, and Ask the Expert sessions. The Official Arduino Day event took place in Milan, in collaboration with Manifattura (see photos), where Massimo Banzi and Fabio Violante unveiled some important figures on Arduino, including the number of IDE downloads over the last year (28M), active users (863K), and Forum contributors (762K). They also presented the latest additions to the MKR family — the MKR GPS Shield, the MKR RGB Shield, the MKR ENV Shield and the MKR THERM Shield — as well as announced the development of the Vidor Visual Composer. Other keynote sessions by our team focused on Arduino and the open source community, the winners of the Arduino Day Community Challenge, the new Arduino IoT Cloud, and highlights around Arduino Education. Were you unable to join us in Italy or tune in to the Arduino Day live stream? Well, we’ve got some good news. You can watch the event in its entirety below, including the AMA with Massimo Banzi! We are immensely proud of the amazing success of Arduino Day 2019, and we want to THANK all of the communities that helped make this special occasion possible. Already looking ahead to next year? Mark your calendars, because Arduino Day 2020 will be taking place on March 21st. In the meantime, don’t forget to share any images or videos of your Arduino Day fun with the hashtag #ArduinoD19!
FAQs
What is the difference between Rev1 and Rev2?
There has been some changes in the sensors, components and PCB design to improve the experience of the users:
- Replacement of IMU from LSM9DS1 (9-axis) for a combination of two IMUs (BMI270 - 6-axis IMU and BMM150 - 3-axis IMU).
- Replacement of power supply MPM3610 for MP2322.
- Addition of VUSB soldering jumper on the top side of the board.
- New test point for USB, SWDIO and SWCLK.
Can the Nano 33 BLE Rev2 be programmed using MicroPython?
Yes, the Nano 33 BLE Rev2 is compatible with MicroPython, to learn more visit the board installation in the Arduino and MicroPython documentation.
Do I need to change my sketch used in the previous revision?
For sketches reliant on the LSM9DS1 library to access IMU data, given the recent modification in this component, users are advised to transition to the Arduino_BMI270_BMM150 library, tailored for the updated combined IMU. For more information visit the Arduino Help Center.
Is it also compatible with the Arduino Nano Screw Terminal Adapter?
Yes, the Arduino Nano 33 BLE Rev2 is compatible with the Arduino Nano Screw Terminal Adapter.
Is it also compatible with the Arduino Nano Motor Carrier?
Yes, the Arduino Nano 33 BLE Rev2 is compatible with the Nano Motor Carrier.
