Skip to content

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00

Arduino Pro Opta Ext A0602

SKU AFX00007 Barcode 7630049204119 Show more
Original price €0
Original price €232,18 - Original price €232,18
Original price
Current price €232,18
€232,18 - €232,18
Current price €232,18
VAT included

The snap-on expansion module to enhance Arduino Opta’s applications with the addition of 2 analog and 4 PWM digital outputs.

Overview

Arduino Pro Opta Ext A0602 enhances your Arduino Opta’s real-time control, monitoring and predictive maintenance applications with the addition of 6 programmable inputs, 2 programmable outputs and 4 PWM outputs. 
Just snap on the module to extend your system’s capabilities flexibly and quickly, and manage the new I/Os from the Opta base unit seamlessly, taking advantage of the open and widely known Arduino ecosystem or PLC IDE IEC 61131-3 programming environment. 

Key benefits include:

  • Flexible inputs: 4 analog inputs, user-programmable for 0-10 V, 0/4-20 mA, or temperature measurement via RTD PT100 2 wires and 2 analog inputs, user-programmable for 0-10 V, 0/4-20 mA, or temperature measurement via RTD 3-wire PT100 sensors.
  • Configurable outputs: 2 analog outputs (0-10 V or 0/4-20 mA).
  • 4 digital PWM outputs. 
  • Up to 5 snap-on modules can be managed to multiply and mix a set of I/Os with seamless detection: snap them right next to your Opta base module and use the I/Os as native Opta resources.
  • Extend your hardware capabilities while keeping programming accessible, by using the Arduino IDE with its wide range of ready-to-use sketches, tutorials and libraries.
  • Put your new I/Os easily to work with the PLC IDE for IEC 61131-3 PLC languages, taking advantage of its low-code approach and pre-mapped resources.
  • Extend the Opta’s benefits of real-time remote monitoring via intuitive Arduino Cloud dashboards and secure communication to a wider set of connected devices.
  • Reliable by design, thanks to industrial certifications and Finder’s expertise in electronic devices.
  • Easy DIN rail installation.

APPLICATIONS

Increase with great efficiency the variety of analog data managed by any physical solution, from sensors to actuators, both with 0-10 V and 0/4-20 mA signals. The data, collected in real time and with great accuracy, allows you to monitor and control industrial applications automatically, with Opta’s impeccable precision.

Looking for a digital expansion module?
Check out the Arduino Pro Opta Ext D1608E and Arduino Pro Opta Ext D1608S, for more flexible ways to increase the potential of your Opta-based projects.


Resources for Safety and Products

Manufacturer Information

The production information includes the address and related details of the product manufacturer.

Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
https://www.arduino.cc/ 

Responsible Person in the EU

An EU-based economic operator who ensures the product's compliance with the required regulations.

Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
Phone: +39 0113157477
Email: support@arduino.cc

 

Documentation

Get Inspired

PROJECT HUB
Claw prosthesis controlled by myoelectric sensor
Claw prosthesis controlled by myoelectric sensor
Project Tutorial by luiz_coppini

Print a claw on your 3D printer and use a myoelectric sensor to control it.

read more
BLOG
Your Arduino Nano ESP32 can run Doom
Your Arduino Nano ESP32 can run Doom
September 12, 2023

"But can it run Doom?" is more than just a joke in the tech world. It is also a decent litmus test for the computing power of hardware. That test isn't very relevant for modern computers, but it is still worth asking when discussing microcontrollers. Microcontrollers vary in dramatically in processing power and memory, with models to suit every application. But if you have an Arduino Nano ESP32 board, you can run Doom as Naveen Kumar has proven. The Nano ESP32 is a small IoT development board for the ESP32-S3 microcontroller, featuring Wi-Fi® and Bluetooth® connectivity. It also has a relatively high clock speed and quite a lot of memory: 240MHz and 512kB SRAM, respectively. That still isn't enough to meet the requirements of the original Doom release, which needed a lot more RAM. But Kumar demonstrates the use of an MCU-friendly port that runs well on this more limited hardware. Want to give it a try yourself? You'll need the Nano ESP32, an Adafruit 2.8" TFT LCD shield, an M5Stack joystick, a Seeed Studio Grove dual button module, a breadboard, and some jumper wires to create a simple handheld console. You'll have to compile and flash the Retro-Go firmware, which was designed specifically for running games like Doom on ESP32-based devices. You can then load the specialized WAD (Where's All the Data) files. Kumar reports an average frame rate at a 320×240 resolution, which is very playable.

read more

Inspired by your shopping trends

  • Arduino Pro Opta Ext D1608E

    Arduino Pro Opta Ext D1608E enhances your Arduino Opta’s real-time control, monitoring and predictive maintenance applications with the addition of 16 programmable voltage inputs and 8 electromecha...

  • Arduino Pro Opta Ext D1608S

    Arduino Pro Opta Ext D1608S enhances your Arduino Opta’s real-time control, monitoring  and predictive maintenance applications with the addition of 16 programmable voltage inputs and 8 solid-state...

  • Arduino Opta RS485

    Arduino Opta is a secure, easy-to-use micro PLC with Industrial IoT capabilities.  Designed in partnership with Finder – leading industrial and building automation device manufacturer – Opta allows...

  • Arduino Opta Lite

    Arduino Opta is a secure, easy-to-use micro PLC with Industrial IoT capabilities.  Designed in partnership with Finder – leading industrial and building automation device manufacturer – Opta allows...

Compare products

0 of 3 items selected

Select first item to compare

Select second item to compare

Select third item to compare

Compare