Step-Down DC/DC switching converter, with particularly small dimensions (48.35 x 23.35 x 14 mm), capable of converting a DC voltage between 3 and 40 volts into an output voltage from 1.5 to 35 volt...

The ProtoShield makes it easy for you to design custom circuits. You can easily solder TH or SMD ICs on the prototyping area to test them with your Arduino board. The SMD area is designed for a max...

If you are experimenting with monitoring fleets, high-altitude scientific experiments, or any kind of project requiring localization of devices, the MKR GPS Shield will offer you the functionality ...

Ideal for use with experimental boards! The wires are separable for ease of use.

Ideal for use with experimental boards!

USB 2.0 Type A Male to Micro Type B Male Cable Black - 1 m This cable is needed to connect your PC to a board that uses this kind of connector.

The piezo can be connected to digital outputs, and will emit a tone when the output is high. Alternatively it can be connected to an analog pulse-width modulation output to generate various tones a...

Plastic package containing 10 pieces of the following horizontal mount trimmer values: 500 ohm (501) 1 kohm (102) 2 kohm (202) 5 kohm (502) 10 kohm (103) 20 kohm (203) 50 kohm (503) 100 k...

A small photovoltaic panel, ideal for conducting experiments with solar energy.

A small polycrystalline photovoltaic cell, ideal for conducting experiments with solar energy or LED applications.

Output voltage: 5.5 V, maximum current: 170 mA, connection: red-black cable with JST connector.

This monocrystalline photovoltaic panel is ideal for charging batteries, smartphones, robotics.  

A photovoltaic solar panel with extremely small dimensions, ideal for conducting experiments with solar energy.

This Power Module is a small size 5A 350KHz 25V Buck DC to DC Converter. It can convert any DC voltage between 3.6V-25V to a selectable voltage from 3.3V to 25V. You can choose 5V direct output vol...

DC/DC Step-Down converter that allows to convert a continuous voltage input between 5 and 32 volts into an output voltage from 1.2 to 30 volts (adjustable via trimmer). The maximum available curre...

This is a small breadboard (4,6x3,6 cm) with 170 tie points. It is self-adhesive and compatible with the Arduino Proto Shield.

150x90 mm through hole board PCB

100 x 50 mm through hole board PCB

This Solar lipo charger is designed for single Lithium battery (3.7V) for intelligent charging, with input reverse polarity protection. The maximum charging current is 500 milliamperes and the con...

Most ultrasonic distance sensors aren't waterproof which can be a problem if you need your project to withstand the elements outdoors. No need to worry any more! This is a waterproof & ultrason...

With this RGB and Gesture sensor, you will be able to control a computer, microcontroller, robot, and much more with a simple hand gesture! The usage pins are as follows: VL (optional IR LED power...

Grove - DPS310 is a high precision barometric pressure sensor, it can measure air pressure change caused by height changes in the centimeter level. Typical Applications: Indoor Navigation (floo...

The board includes a Nuvoton ISD9160, a microphone, 1 SPI flash, 1 grove connector, 1 speaker connector and 1 led to show to your voice activity. Nuvoton ISD9160 is (SoC) Chipcorder that based on ...