Skip to content

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00

Mates Stand

SKU TPX00106 Barcode 616010968249 Show more
Original price €0
Original price €29,22 - Original price €29,22
Original price
Current price €29,22
€29,22 - €29,22
Current price €29,22
VAT included

The Mates Stand is an aluminium stand with integrated PCB designed to provide a base platform for MatesBUS based products for development or showcasing.

Overview

The Mates Stand offers a simple connection for a MatesBUS compatible device, such as the TIMI-96.
It eases development by propping the MatesBus compatible device up on an angle (35 degrees off vertical), aiding development when standing on a desk or bench.

The Mates Stand breaks out the ten signals found on the MatesBUS interface into two separate 5-pin headers, one out of each side of the stand itself, allowing easy connections to the Mates Programmer.

The headers are also easy to attach jumper wires to other devices or a Host, which can then be situated on a Breadboard or directly, somewhere beside or behind the stand itself.
The MatesBUS Stand utilises the BBM MatesBus, a unique interface pinout designed to be simple and easy to use.

The MatesBus is made up of 2 rows of 5 pins, 0.1” (2.54mm) pitch, spaced 0.3” (7.62mm) apart, ideal for direct plug into a breadboard or compatible adaptor or development board.
On the base of the MatesBUS stand are four mounting holes to fasten it down as required.


Get Inspired

PROJECT HUB
Create a Human-Machine Interface (HMI) with Arduino
Create a Human-Machine Interface (HMI) with Arduino
Project Tutorial by sabas1080

Learn how to build a complete HMI with Arduino that will allow you to interact with your projects in an intuitive and visual way.

read more
BLOG
Machine-to-machine communication is easier than ever: Opta now supports OPC UA
Machine-to-machine communication is easier than ever: Opta now supports OPC UA
November 5, 2024

OPC Unified Architecture – OPC UA in short – is a cross-platform, open-source machine-to-machine communication protocol for industrial automation. It was developed by the Open Platform Communications (OPC) Foundation and is defined in detail in the IEC 62541 standard. With the release of the Arduino_OPC_UA library we enable users to convert any product from our Arduino Opta range into an OPC UA-enabled device. Step-by-step guide to setting up OPC UA on Arduino Opta It’s as simple as uploading a single sketch onto your Opta and connecting it to an Ethernet network. Once uploaded, the OPC UA firmware exposes the Arduino Opta’s analog and digital inputs, the user button and LED (only Arduino Opta WiFi), as well as its relay outputs as properties that can be read from or written to using OPC UA. OPC UA communication is performed using OPC UA binary encoding via TCP sockets. Arduino_OPC_UA is a port of the Fraunhofer open62541 library implementing IEC 62541 in highly portable C99 for both Windows and Linux targets. One serious challenge during the porting of open62541 was to decide on sensible tradeoffs concerning RAM consumption, as using OPC UAs full namespace zero (NS0) requires up to 8 MB of RAM while the STM32H747 powering the Arduino Opta has a total of 1 MB of SRAM to offer – some of which already allocated by the the Arduino framework for the Arduino Opta. Expand functionality with Arduino Opta Modules and OPC UA integration Additionally, Arduino_OPC_UA supports the automatic discovery, configuration and exposure as OPC UA objects of the recently released Arduino Opta expansion modules. Currently three different expansion modules exist: Arduino Opta Analog Expansion (A0602), Arduino Opta Digital Expansion with electro-mechanical relay outputs (D1608E), and with solid-state relay outputs (DS1608S). During system start-up, the Arduino Opta’s expansion bus is queried for connected expansion modules and automatically configures them and

read more

Inspired by your shopping trends

  • CAN-BUS Shield v2

    It is commonly found on modern machine tools and as an automotive diagnostic bus. Thanks to the CAN-BUS, makers are able to hack their cars!  It adopts MCP2515 CAN-BUS controller with SPI interfac...

  • Arduino CTC 101 Program - Self Learning

    Creative Technologies in the Classroom 101, or CTC 101, is a 5 modules STEAM program, tailored for students ages 13 to 17. It is the flagship Arduino Educational Program for schools. CTC 101 use...

  • 10 jumper wires 150mm male

    These are a long flexible jumpers wires of 150 mm with a male connectors on the ends. They are perfect to use to make projects with your Arduinos and breadboard.

  • 4x SP10 probes and test wires

    No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release.  Saves time and frustra...

Compare products

0 of 3 items selected

Select first item to compare

Select second item to compare

Select third item to compare

Compare