Skip to content

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00

Gravity: I2C Ozone Sensor (0-10ppm)

SKU TPX00052 Barcode SEN0321 Show more
Original price €0
Original price €54,59 - Original price €54,59
Original price
Current price €54,59
€54,59 - €54,59
Current price €54,59
VAT included

Module with an ozone detection sensor that performs measurements in the range of up to 10 ppm with a resolution of 0.01 ppm. 

Overview

Gravity: I2C Ozone Sensor (0-10ppm) is based on electrochemical principles and it can measure the ambient O3 concentration accurately and conveniently. With high anti-interference ability, high stablility and high sensitivity, this arduino-compatible ozone sensor can be widely applied to fields like portable device, air quality monitoring device, disinfection cabinets and smart home.

This compact dfrobot ozone sensor supports I2C output, it is compatible with many mainboards like Arduino Uno, esp32, Raspberry Pi and so on. Its resolution can reach to 10ppb. It supports wide range input voltage: 3.3V to 5.5V.
Moreover, the lifetime is as long as 2 years. With simple Gravity interface and practical sample code, you can build your own ozone concentration monitor easily and conveniently.

Features:

  • High sensitivity
  • Low power consumption
  • Excellent stability and anti-interference ability
  • IIC Interface
  • Temperature compensation, excellent linear output
  • Long lifetime
  • Compatible with both 3.3V and 5V micro-controllers
  • Polarity protection

Tech specs

  • Detection of Gases: Ozone
  • Operating Voltage: 3.3 to 5.5V DC
  • Output Signal: IIC output
  • Measurement Range: 0 to 10ppm
  • Resolution: 0.01ppm (10ppb)
  • Preheat Time: 3 minutes
  • Response Time: ≤90 seconds
  • Recovery Time: ≤90 seconds
  • Operating Temperature: -20℃ to 50℃
  • Operating Humidity: 15 to 95%RH (no condensation)
  • Storage Temperature: -20℃ to 50℃
  • Lifetime: >2 years (in the air)
  • Board Dimension: 1.06" x 1.46" / 27mm x 37mm

Get Inspired

BLOG
New Portenta Breakout: Maximize the power of the Portenta!
New Portenta Breakout: Maximize the power of the Portenta!
March 10, 2021

We are pleased to announce the launch of the new Arduino Portenta Breakout, designed for developing hardware projects, testing, and debugging on Portenta family boards.The Portenta Breakout exploits all the capabilities of the input and outputs, making all high density connectors’ signals individually accessible. The Portenta Breakout reduces development time for industrial grade solution automation based on the Portenta line. Designed to help the hardware engineers and makers who want to develop a proprietary device for Portenta family boards or interfacing external devices to the Portenta family boards (e.g. the Portenta H7). It is now quick and easy to connect and test external hardware components and devices in the lab using all the high density connectors’ signals of the Portenta individually. Rapid development for machine vision Connectivity to the OpenMV Global Shutter Camera Module is provided on the Portenta Breakout, allowing for rapid development of machine vision applications alongside the Portenta family. Test external hardware and devices The Portenta Breakout enables easy debugging through the JTAG connector and allows for inspection of the bus lines through the breakout pins. In addition to the breakout pins, the Portenta Breakout features Ethernet, USB and SD sockets, a coin cell, a power button, an external power supply, an OpenMV camera socket, and configurable boot selection modes. Features include: Power ON buttonBoot mode DIP switchConnectorsUSBARJ45 GBit EthernetMicroSD cardOpenMV shutter moduleMIPI 20T JTAG with trace capabilityPowerCR2032 RTC lithium battery backupExternal power terminal blockI/OBreak out all Portenta high density connector signals Male/female HD connectors for interposing breakout between Portenta and shield to debug signals Beyond use in the development lab, the Portenta Breakout can act as a first point of entry for educating technicians in industrial grade control and embedded

read more

Inspired by your shopping trends

  • Gravity: Analog CO2 Gas Sensor (MG-811 Sensor)

    Great and powerful sensor for everyone that wants to know the exact concentration of CO2(Carbon Dioxide) in the air.  This is the first CO2 sensor compatible with Arduino. The output voltage of th...

  • Gravity: 27 Pcs Sensor Set for Arduino

    If you want to start playing with sensors, this sensor kit for arduino will be the perfect choice for you to get started. It comes with bundle of the most popular sensors such as light sensors, gas...

  • Grove - Gas Sensor (O2)

    You can see the current oxygen concentration from reading the voltage values output proportional to the concentration of oxygen on the oxygen concentration linear characteristic graph. It’s suitabl...

  • Gravity: Analog pH Sensor / Meter Pro Kit For Arduino

    Professional pH Sensor Meter Kit with industrial electrode. It has built-in simple, convenient, practical connection and long life (up to 1 year), which makes it very suitable for long term online ...

Compare products

0 of 3 items selected

Select first item to compare

Select second item to compare

Select third item to compare

Compare