Skip to content
Free shipping on orders over 90€ to Austria, France, Germany, Italy, and Spain!*
Free shipping on orders over 90€ to Austria, France, Germany, Italy, and Spain!*

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00
Environment Monitoring

Environment Monitoring

Monitor the world around you: Arduino environmental sensing collection Explore an array of sensors and modules meticulously crafted to capture and analyze the nuances of your surroundings.

Environment Monitoring

Monitor the world around you: Arduino environmental sensing collection Explore an array of sensors and modules meticulously crafted to capture and analyze the nuances of your surroundings.

Environment Monitoring

  • Arduino Leonardo with Headers

    The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz cr...

  • Arduino Uno Rev3

    Arduino Uno is a microcontroller board based on the ATmega328P (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator ...

  • ATMega328 - microcontroller - bootloader UNO

    Atmel ATmega328 microcontoller in a DIL-28 package , pre-loaded with the Arduino UNO 16MHz bootloader. Using this device enables the use of Arduino code in a custom embedded project without having ...

  • Arduino Mega 2560 Rev3

    The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial po...

  • Environmental Monitor Bundle

    Measure, read and visualize the temperature, humidity, pressure, light and UV levels. This bundle with accompanying online project shows you how to set-up and read environmental data from the senso...

  • 14.5mm Strip 10 ways 2 pcs

    Pair of 10 pin Female/Male header strips, very useful for board extensions. We use them extensively on Proto Shield PCB, but they are useful in any shield because of their height. Features: Rec...

  • 1.2 K ohm resistor 10x

    Resistor package color and shape may vary slightly from image as our stock rotates.

  • USB Cable Type A Male to Micro Type B Male

    USB 2.0 Type A Male to Micro Type B Male Cable Black - 1 m This cable is needed to connect your PC to a board that uses this kind of connector.

  • Grove - 3-Axis Digital Accelerometer (±16g)

    This 3-Axis Digital Accelerometer(±16g) is based on the low power consuming IC ADXL345. It features up to 10,000g high shock survivability and has a configurable samples per second rate. For applic...

  • Grove - 4 pin Female to Grove 4 pin Cable (5 Pcs)

    The female jumper on this cable is compatible with 2.54 pitch pin headers. With this cable, you can easily connect all of Grove modules to any 2.54 mm pitch connector.    

  • Grove - 4 pin Male to Grove 4 pin Cable (5 Pcs)

    With this special designed conversion cables, you can easily integrate the comprehensive Grove system with breadboard or other microcontrollers that don't have compatible Grove - Base Shield yet (l...

  • Grove - 6-Axis Accelerometer & Gyroscope

    It has a low power consumption digital chip LSM6DS3 and power supply regulator which features high sensitivity and low noise interference. It can be configured to different levels of sensitivity to...

  • Grove - 80cm Infrared Proximity Sensor

    This sensor SharpGP2Y0A21YK, boasts a small package and very low current consumption, takes a continuous distance reading and returns a corresponding analog voltage with a range of 10cm (4") to 80c...

  • Grove - Air quality sensor v1.3

    This sensor is designed for comprehensive monitor over indoor air condition. It's responsive to a wide scope of harmful gases, as carbon monoxide, alcohol, acetone, thinner, formaldehyde and so on....

  • Grove - Button (P)

    What does “P” mean? “P” is for “panel mount” in this product. This Grove – Button is a sister version of original Grove - Button. They are identical except the Grove connecter is moved to the back ...

  • Grove - Buzzer - Piezo

    The piezo can be connected to digital outputs, and will emit a tone when the output is high. Alternatively it can be connected to an analog pulse-width modulation output to generate various tones a...

  • Grove - Dust Sensor

    This Dust Sensor gives a good indication of the air quality in an environment by measuring the dust concentration. The Particulate Matter level (PM level) in the air is measured by counting the Low...

  • Grove - Gas Sensor (MQ9)

    It can detect combustible Carbon Monoxide, Coal Gas and Liquefied Gas. The sensitivity can be adjusted by the potentiometer. Hardware Overview This is an Analog output sensor. It needs to be conn...

  • Grove - Infrared Emitter

    An infrared LED is like any other LED, with its color centered around 940nm. We can not only use the emitter to transmit data or commands, but also to emulate remotes to control your home appliance...

  • Grove - OLED Display 0.96"

    Compared to LCD, OLED screens have a number of advantages such as high brightness, self-emission, high contrast ratio, slim / thin outline, wide viewing angle, wide temperature range, and low power...

  • Grove - Universal 4 Pin Buckled 30cm Cable (5 Pcs)

    Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove modules to the Basic Shield or to other Grove compatible boards for quick prototyping. 30 cm cables

  • Grove - Universal 4 Pin Buckled 50cm Cable (5 Pcs)

    Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Grove modules to the Basic Shield or to other Grove compatible boards for quick prototyping. 50 cm cables

  • Arduino Science Kit Physics Lab

    Science teachers who want to bring an inquiry-based, hands-on approach to their middle school classrooms can enable their students to think and act like real scientists with the Science Kit Physics...

  • Arduino Oplà IoT Kit

    The Oplà IoT Kit allows you to add connectivity to devices around the home or workplace. It comes complete with a set of 8 Internet of Things self assemble projects ready to show you how to turn ...

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare