Overview
Even though Arduino Education kits are jam-packed with everything you need, we know that mislaying parts in the excitement of getting hands-on in a classroom can sometimes happen.
In the Arduino Replacements Pack, you’ll find all the common electronics parts two students may need to complete their projects.
This pack has replacement parts for the Arduino Starter Kit Classroom Pack, Arduino Student Kit, Arduino Education Starter Kit, Arduino CTC 101 and ARDUINO CTC GO! - CORE MODULE.
The pack contains a total of 183 replacement parts, including a breadboard, jump wires, LEDs, resistors, transistors, sensors, and more. (It doesn’t include motors, as you’ll find they’re not lost as often! But if you do need a new motor, board, or USB cable, you can find them all in our online store.)
Note that for larger products such as CTC GO!, you may need more than one pack of replacement parts.
Tech specs
The Arduino Replacement Pack includes:
- 1 Breadboard Assembly
- 10 Jumper Wires
- 5 Red LEDs
- 5 Green LEDs
- 5 Yellow LEDs
- 10 220Ω Resistors
- 5 680Ω Resistors
- 5 560Ω Resistors
- 5 470Ω Resistors
- 5 1.2 KΩ Resistors
- 5 10 KΩ Resistors
- 5 1 KΩ Resistors
- 5 4.7 KΩ Resistors
- 5 10 MΩ Resistors
- 5 1 MΩ Resistors
- 2 100 uF capacitor
- 2 Phototransistors
- 2 Piezos
- 5 Push Buttons
- 5 Potentiometers
- 5 Knobs for potentiometer
- 1 Battery Wire 9V - open lead
- 1 Zener diode
- 1 Temperature sensor
- 1 Optocoupler
- 1 Mosfet transistors
- 1 Tilt sensor
- 1 Steel ball 12 mm diameter
Resources for Safety and Products
Manufacturer Information
The production information includes the address and related details of the product manufacturer.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
https://www.arduino.cc/
Responsible Person in the EU
An EU-based economic operator who ensures the product's compliance with the required regulations.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
Phone: +39 0113157477
Email: support@arduino.cc
Get Inspired
Control the air/fuel mixture for a better fuel economy of a engine with a Arduino Nano.
When you want to paint the walls in your bedroom that very specific shade of Misty Irish Green, all you have to do is head to your local hardware store and have them scan the corresponding card. The paint-mixing machine will then add the pigment to a white base and, a few minutes later, you have that exact color. So, shouldn’t you be able to do the same thing with acrylic paint for hobby purposes? Now you can, thanks to the “Color By Code” machine designed by Caltech students Frida Moreno and Asmat Kaur Taunque. Moreno and Taunque built Color By Code for a class project and it is, essentially, a hobby version of those hardware store paint-mixers intended for acrylic paint. As is the standard across many industries that deal with pigments, paint, and printing, this works using CMYK (cyan, magenta, yellow, key) color mixing. Here, the key is black and the machine takes an input color value for each component, then dispenses the paint in those ratios to achieve the desired hue. That all happens under the control of an Arduino Nano Every board. That operates peristaltic pumps, via L298N motor drivers, that dispense each color. Afterwards, a flushing procedure clears the lines before the next mix. The pumps fit into a 3D-printed stand, with the hoses dropping below to a waiting container. At this time, the user must set the color values through serial commands. But the team hopes to create a Bluetooth app in the future. They also plan to add a weight sensor, which would improve the machine’s accuracy.
