Overview
Through it, you can control a circuit of high voltage with low voltage, say 5V on the controller. There is an indicator LED on the board, which will light up when the controlled terminals get closed.
Tech specs
Specifications
|
Parameter |
V1.1 |
V1.2 |
|
Product Release Date |
27th Jan 2013 |
9th June 2014 |
|
Operating Voltage |
5V |
3.3V~5V |
|
Operating Current |
60mA |
100mA |
|
Relay Life |
100,000 Cycle |
100,000 Cycle |
|
Max Switching Voltage |
250VAC/30VDC |
250VAC/30VDC |
|
Max Switching Current |
5A |
5A |
Pinmapping
|
Grove-Relay |
Arduino |
|
GND |
GND |
|
VCC |
5V |
|
SIG |
D4 |
Get Inspired
Control everything with a SINGLE phone call.
… between the Rev2 and the previous version of the MKR IoT Carrier. Here are the main ones. Some sensors have changed: The humidity sensor (HTS221) and barometric pressure sensor (LP22HB) has been replaced with the BME688 sensor.The IMU (LSM6DS3) was replaced with LSM6DSOX. Following customer feedback some other components have been repositioned: Addition of a handy reset button90° rotation of the relay connectorsRepositioning of the light sensor (APDS-9960)Change of pins assigned to control the relays to pins 1 and 2Change grove connector assignment from pin A5 to A6 Do I have to change my sketch if I have been using the first revision of the MKR IoT Carrier? No — the MKR IoT Carrier library works with both revisions of the carrier. Just make sure to use the latest version of the library to ensure everything goes smoothly. Have more fun with the IoT The new MKR IoT Carrier Rev2 is the perfect tool to get started having fun with your own IoT projects, or to take your IoT tinkering to the next level. You don’t need a ton of experience, a bucket of expensive components, or endless hours of free time to build your own satisfying, useful IoT gadgets at home. Discover the MKR IoT Carrier Rev2
