Grove - 6-Axis Accelerometer & Gyroscope
Sold outThe Grove - 6-Axis Accelerometer & Gyroscope is a cost-effective Grove sensor integrated with a 3-axis digital accelerometer and a 3-axis digital gyroscope.
Overview
It has a low power consumption digital chip LSM6DS3 and power supply regulator which features high sensitivity and low noise interference. It can be configured to different levels of sensitivity to acceleration and can use different ranges of angular rate measurement. It is provided with a detailed SDK, which makes the prototyping process quick and easy.
This product is good for applications where tilt, motion, and tap sensing is needed.
Features:
- Grove interfaced and cost-effective.
- Digital-output for 6 DOF motion data.
- ±2/±4/±8/±16 g full scale leaner acceleration sensing range for various environment.
- ±125, ±245, ±500, ±1000, ±2000 degree per seconds(dps) for angular rate measurement range makes it versatile.
- A Detailed SDK for easy programming.
- Regulated power supply for reliable data to be collected.
- Programmed interrupts for different event.
Tech specs
- Analog supply voltage: 5V/3.3V(DC)
- Power consumption: 0.9 mA in combo normal mode and 1.25 mA in combo high-performance mode up to 1.6 kHz
- Linear acceleration measurement range ±2/±4/±8/±16 g full scale (typical value)
- Angular rate measurement range ±125, ±245, ±500, ±1000, ±;2000 dps(typical value)
- Linear acceleration sensitivity 0.061(FS = ±2), 0.122(FS = ±4), 0.244(FS = ±8), 0.488(FS = ±16) mg/LSB
- Angular rate sensitivity 4.375(FS = ±125), 8.75(FS = ±245), 17.50(FS = ±500), 35(FS = ±1000), 70(FS = ±2000)
Technical Details
|
Dimensions |
140mm x 85mm x 10.3mm |
|
Weight |
G.W 6g |
Get Inspired
Easy data logging with grove sensors using the MKR Connector Carrier and MKR boards
Getting started with electronics and sensing the world around you is now easier than ever with the new all-in-one Arduino Sensor Kit from Arduino, in partnership with Seeed. The 10 most popular modules and sensors for your Arduino UNO have been integrated onto a single board, providing plug-and-play convenience without the need for any soldering or wiring! Combining basic Grove sensors and actuators for the Arduino UNO, the kit contains a base shield featuring the following modules that can be connected either through the digital, analog, or I2C connectors: An OLED screen4 digital modules (LED, button, buzzer and potentiometer)5 sensors (light, sound, air pressure, temperature, and accelerometer) Just plug the Arduino Sensor Kit into the Arduino UNO, then you're ready to follow the Plug, Sketch & Play online lessons that make getting started a breeze. The kit is equipped with 16 Grove connectors, which when placed on the board, offer functionality to the various pins. With seven digital connections, four analog connections, four I2C connections, and a UART connection, the base shield can be easily mounted onto an Arduino UNO board and programmed through the Arduino IDE. Now available from the Arduino Store, the Arduino Sensor Kit comes as a standalone kit for only €23.00 / US$25.00, or can be purchased with the Arduino UNO Rev3 board as a great value bundle for €38.70 / US$39.80. For more details, check out our website here.
