Products

This module is equipped with 1 relay that allows you to activate/deactivate the load connected to it 240V/10A (max). The relay is activated by connecting the positive to 5 volts to the “S” pin.

These are a long flexible jumpers wires of 150 mm with a male connectors on the ends. They are perfect to use to make projects with your Arduinos and breadboard.

Particularly suitable for reducing the number of I/Os required when used with Arduino or other microcontroller, the I²C interface has jumpers to activate the backlight and contrast adjustment which...

This is a 20W adjustable DC-DC buck converter module with digital display. It is based on LM2596 3A step-down voltage regulator and supports an input of 0~40V DC with an accuracy of ± 0.05V. On a ...

This camera is based on GC2415 Color rolling shutter image sensor. The GC2145 incorporates a 1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal processor. The 2MP GC2145 camera ...

Particularly suitable for making soldering in various applications. Power supply 230 Vac.

This module is equipped with 4 relays that allow you to activate/deactivate the load connected to them 240V/10A max. It has optoisolated inputs and status LEDs.

Ideal for use with experimental boards! The wires are separable for ease of use.

40 separable wires, each 20 cm long, with female 1-pole connector on one end and male 1-pole connector on the other end. Ideal for use with experimental plates.

Ideal for use with experimental plates.

No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release.  Saves time and frustra...

Output voltage: 5.5 V, maximum current: 170 mA, connection: red-black cable with JST connector.

This monocrystalline photovoltaic panel is ideal for charging batteries, smartphones, robotics.  

Ideal for Budding architects from age 12 years old to learn all about contemporary architectural design while using advanced building methods and materials. Arckit A100 is the perfect STEM & ST...

The A200 building kit comes with:  200 Arckit pieces (Architectural building blocks).   37 x Reusable Arckitexture decals (including white louvres, light timber, bricks and vegetation).  43 x ...

Product material: cardboard paper Double-sided (green/white) 100% Arckit compatible Plate dimensions: 400x275x3mm  Recommended for age 5+

The enclosure is designed to snap together securely with no tools required. You can still press all the buttons and slide the switch thanks to a clever plastic widget fitted inside. The case winds ...

Solder sucker pump made of aluminum and ABS. Length 194 mm, diameter 20 mm. Teflon tip.

The Arducam OV7675 camera provides support for resolutions of up to 640x480 pixels, ensuring the capture of clear and sharp images. Its versatile range of features enhances the functionality of you...

At the heart of the enclosure is an additional PCB with an integrated voltage regulator (soldering required) and prototyping area. This PCB comes with slots for the Arduino MKR or Portenta H7 board...

Do you want to install your Arduino UNO project into a control cabinet? Look no further! The ArduiBox Open DIY kits house an Arduino board and mount it to a DIN rail. The kit comes with a prototypi...

The Arduino 4 Relays Shield is a solution for driving high power loads that cannot be controlled by Arduino's digital IOs, due to the current and voltage limits of the controller. The Shield featur...

The Arduino 9 Axes Motion Shield is based on the BNO055 absolute orientation sensor from Bosch Sensortec GmbH which integrates a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope with a ra...