-
Speed control for DC motors from 3 to 35V 5A
Also ideal for adjusting the brightness of LED lights and strips.
-
Gesture Breakout with APDS-9960
With this RGB and Gesture sensor, you will be able to control a computer, microcontroller, robot, and much more with a simple hand gesture! The usage pins are as follows: VL (optional IR LED power...
-
Mini encapsulated solar cell 2V 0,6W
A photovoltaic solar panel with extremely small dimensions, ideal for conducting experiments with solar energy.
-
Box of 100 pcs M.O. 10 VAL. trimmer resistors from 500 to 1 Mohm
Plastic package containing 10 pieces of the following horizontal mount trimmer values: 500 ohm (501) 1 kohm (102) 2 kohm (202) 5 kohm (502) 10 kohm (103) 20 kohm (203) 50 kohm (503) 100 k...
-
Box of 300 pcs 3-5 mm LED lights in various colors
Plastic case organized in compartments containing 300 LEDs of 3 and 5 mm with assortment in red, blue, yellow, green and white colors. 40 LEDs per color of 3mm, 20 LEDs per color of 5mm.
-
40 colored female-female jumper wires
Ideal for use with experimental boards! The wires are separable for ease of use.
-
Pack of 50 female-female jumper wires in various colors
Ideal for use with experimental boards!
-
4 relay module 5VDC 10A (assembled)
This module is equipped with 4 relays that allow you to activate/deactivate the load connected to them 240V/10A max. It has optoisolated inputs and status LEDs.
-
1 relay module 5 Vdc 10A (assembled)
This module is equipped with 1 relay that allows you to activate/deactivate the load connected to it 240V/10A (max). The relay is activated by connecting the positive to 5 volts to the “S” pin.
-
Benchtop solder fume extractor - 23W
It eliminates harmful welding fumes, various resins and pyrograph fumes from the workstation. It can be easily adjusted in several positions to ensure optimal smoke extraction. It comes complete wi...
-
Solar Panel Charge Controller - 10 A
It allows to provide the right degree of current to the batteries protecting them from an excess of discharge or charge in order to prolong their life cycle as much as possible. Attention! use onl...
-
Bluetooth Low Energy 4.0 Module - HM-10
This is a Bluetooth 4.0 (Low Energy) module compliant with ISM 2.4 GHz, with master/slave mode of operation and transparent data transmission, based on the Texas Instruments CC2541 chip with 256K F...
-
Box 525 1% precision resistors - 17 values
Contents of the package: 25 pieces - 0 Ohm 25 pieces - 10 Ohm 25 pieces - 20 Ohm 25 pieces - 47 Ohm 25 pieces - 470 Ohm 25 pieces - 2.2 KOhm 25 pieces - 4.7 KOhm 25 pieces - 22 KOhm 25 p...
-
40 colored male-female jumper wires
40 separable wires, each 20 cm long, with female 1-pole connector on one end and male 1-pole connector on the other end. Ideal for use with experimental plates.
-
40 colored male-male jumper wires
Ideal for use with experimental plates.
-
16x2 LCD display with I²C interface
Particularly suitable for reducing the number of I/Os required when used with Arduino or other microcontroller, the I²C interface has jumpers to activate the backlight and contrast adjustment which...
-
Microwave motion radar
The RCWL-0516 is particularly suitable as an alternative to using a PIR motion sensor. When it detects a moving object, the output changes from a low logic level to a high level (3.3 volts). Approp...
-
Set of 70 assorted color 5mm LEDs
A set consisting of 10 blue 5 mm LEDs, 10 green, 10 red, 10 yellow, 10 white, 10 common anode RGB and 10 common anode bicolour (red-green) LEDs.
