Overview
Simply connect it to Grove - Base shield and program it, when anyone moves in its detecting range, the sensor will output HIGH on its SIG pin.
Features:
- Grove compatible interface
- Adjustable detecting distance
- Adjustable holding time
Tech specs
Specifications
|
Parameter |
Value/Range |
|
Operating Voltage |
3V–5V |
|
Operating Current(VCC = 3V) |
100uA |
|
Operating Current(VCC = 5V) |
150uA |
|
Measuring Range |
0.1 - 6m |
|
Default detecting distance |
3m |
|
Holding Time |
1 - 25s |
|
Working Wave Length |
7 - 14um |
|
Detecting Angle |
120 degrees |
Get Inspired
… source. Ozone includes all well-known debug controls and information windows, while making use of the best performance of J-Link debug probes. The user interface is highly intuitive, yet fully configurable. Each window can be moved, re-sized and docked to fit every developer’s needs. There are four different J-Link models already available on the Arduino Store: J-LINK BASE COMPACT: USB powered JTAG debug probe supports a large number of CPU cores. Based on a 32-bit RISC CPU, it can communicate at high speed with supported target CPUs.J-LINK PLUS COMPACT: With this compact version of the J-Link PLUS, users have an unlimited number of flash breakpoints. Mounts securely and unobtrusively into development and end user equipmentJ-LINK EDU: Reserved for educational purposes, the J-LINK EDU offers the same functionalities as the J-Link BASE. It's been designed to allow students, educational facilities and hobbyists access to top of the line debug probe technology.J-LINK EDU MINI: The smallest J-Link debugger, intended for non-commercial use. To connect the Portenta boards with J-Link debuggers, there are two adapters available: Segger’s 50-Mil 10-Pin Patch Adapter and J-Link 19-pin Cortex-M Adapter. The 50-Mil 10-Pin Patch Adapter converts the standard 20 pin 0.1" connector to the standard 10-pin 0.05" Cortex-M connector. This allows custom connections/wiring between the 20-pin and 10-pin side. The 19-Pin Cortex-M Adapter allows JTAG, SWD, and SWO connections between J-Link and Cortex-M based target hardware systems. It adapts from the 20-pin 0.1'' JTAG connector to a 19-pin 0.05'' Samtec FTSH connector as defined by Arm. For more information and tech specs, please check out the Segger items in the store.
