Bluetooth Low Energy 4.0 Module - HM-10
Save 20%Bluetooth 4.0 module (Low Energy) compliant with ISM 2.4 GHz, master/slave operating mode with transparent data transmission, based on the Texas Instruments CC2541 chip with 256K of Flash memory and 8K of RAM.
Overview
This is a Bluetooth 4.0 (Low Energy) module compliant with ISM 2.4 GHz, with master/slave mode of operation and transparent data transmission, based on the Texas Instruments CC2541 chip with 256K Flash memory and 8K RAM.
It can be controlled through simple AT commands (via UART) or programmed with custom applications. Ideal for use in projects where Bluetooth connection is needed, such as between microcontroller and PC. Power supply ranges between 2V and 3.6Vdc.
Note: SMT mounting.
Tech specs
- Bluetooth 4.0 module compliant with ISM 2.4 GHz (HM-10)
- Uses Texas Instruments CC2541 SoC chip with 256K Flash memory and 8K RAM
- Supports master and slave modes
- RX standard gain: 19.6 mA
- TX -6 dBm: 24 mA
- Frequency: 2402 - 2483.5 MHz in 20 kHz steps
- Modulation and Data Rate: 1 Mbps, GFSK
- Number of channels: 40
- Output power: -23 to 4 dBm
- Reception sensitivity: -93dBm/-87dBm
- Stack: ATT, GATT, SMP, L2CAP, GAP
- Range: over 70 meters 10-bit ADC
- Serial interface: UART/SPI Wake-up interrupt, Watchdog Timer
- AES Security Coprocessor
- Power supply: ranges between 2V and 3.6V
- VDD ripple: 100mV max
- Current consumption (at 25°C with VDD = 3V):
- Power Mode 3 (External Interrupts): 0.4uA
- Power Mode 2 (SleepTimerOn): 0.9uA
- Power Mode 1 (3-μs Wake-Up): 235uA
- RX Standard Gain: 19.6mA
- TX -6 dBm: 24mA
- TX 0 dBm: - - Operating temperature: -40°C to +85°C
- Dimensions (mm): 27x13x1.6
- Weight: 5 grams.
Conformities
Get Inspired
… about the value of air quality, while simultaneously introducing them to some core STEM concepts, Arduino has you covered. The Arduino Greenhouse Kit and the Arduino Explore IoT Kit include experiments involving air quality, allowing users to build their own sensors and tracking tools to measure a range of data points like humidity, moisture, and the presence of particles like CO2. These projects both work using the Arduino MKR IoT Carrier Rev2, which has a VOC sensor. Use AI to monitor air quality [October 10, 2024 update] The Nicla family now includes the Arduino Nicla Sense Env, ready to provide real-time data on air quality – monitoring temperature and humidity and detecting TVOCs, NO2, O3, and other gasses – both indoors and outdoors, thanks to AI-ready Renesas sensors. Find out more. Share your projects Have you created a project to monitor or improve the air quality inside your home? If so, share it on our Project Hub! Whether you're passionate about conservation or simply curious about the possibilities, now is your chance to join the community and make a difference. Don't miss out — embrace innovation while honoring our planet.
