Gesture Breakout with APDS-9960
Based on the RGB and Gesture APDS-9960 sensor, equipped with integrated anti-UV and IR filters, four separate diodes sensitive to different directions, and an I2C compatible interface, this small breakout board allows obtaining light and color measurements, proximity and motion detection without contact at a distance from 10 to 20 cm.
Overview
With this RGB and Gesture sensor, you will be able to control a computer, microcontroller, robot, and much more with a simple hand gesture!
The usage pins are as follows: VL (optional IR LED power supply), GND (Ground), VCC (3.3V power supply), SDA (I2C data), SCL (I2C clock), INT (interrupt).
Attention! The breakout operates at 3.3V. Bidirectional communication with 5V devices requires a level shifter.
Tech specs
- Power supply: 3.3 volts
- Interface: I2C
- Detection distance: 10-20 cm.
Conformities
Get Inspired
Easy data logging with grove sensors using the MKR Connector Carrier and MKR boards
Getting started with electronics and sensing the world around you is now easier than ever with the new all-in-one Arduino Sensor Kit from Arduino, in partnership with Seeed. The 10 most popular modules and sensors for your Arduino UNO have been integrated onto a single board, providing plug-and-play convenience without the need for any soldering or wiring! Combining basic Grove sensors and actuators for the Arduino UNO, the kit contains a base shield featuring the following modules that can be connected either through the digital, analog, or I2C connectors: An OLED screen4 digital modules (LED, button, buzzer and potentiometer)5 sensors (light, sound, air pressure, temperature, and accelerometer) Just plug the Arduino Sensor Kit into the Arduino UNO, then you're ready to follow the Plug, Sketch & Play online lessons that make getting started a breeze. The kit is equipped with 16 Grove connectors, which when placed on the board, offer functionality to the various pins. With seven digital connections, four analog connections, four I2C connections, and a UART connection, the base shield can be easily mounted onto an Arduino UNO board and programmed through the Arduino IDE. Now available from the Arduino Store, the Arduino Sensor Kit comes as a standalone kit for only €23.00 / US$25.00, or can be purchased with the Arduino UNO Rev3 board as a great value bundle for €38.70 / US$39.80. For more details, check out our website here.
