Skip to content

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00

Grove - Hall Sensor

Sold out
SKU C000152 Barcode 101020046 Show more
Original price €0
Original price €7,76 - Original price €7,76
Original price
Current price €7,76
€7,76 - €7,76
Current price €7,76
VAT included

The Hall sensor uses the Hall Effect, which is the production of a voltage difference across an electrical conductor, transverse to an electric current in the conductor and a magnetic field perpendicular to the current.

Overview

There is a continuous-time switch on this Grove module. The output from the module switches from low (turns on) when a magnetic field (south polarity) is perpendicular to the Hall sensor and when it passes the operate point threshold BOP it switches to high (turns off) when the magnetic field disappears.

The twig can for example be used to measure RPM of a wheel or a motor.

Features

  • Grove Compatible Interface
  • 400ns transition period for rise and fall.
  • Continuous-time hall effect sensor
  • Reverse current protection

Tech specs

Specifications

Item

Min

Typical

Max

Unit

Supply Voltage

3.8

5.0

24

V

Supply Current

4.1

-

24

mA

Operating Temperature

-40

-

85

ºC

Get Inspired

PROJECT HUB
Arduchat
Arduchat
Project Tutorial by fmuller999

This code sets up an Arduino device to connect to WiFi and communicate with the OpenAI API. It uses the Adafruit_SSD1306 library to control a small OLED display, displaying messages and responses from the API. The device sends a prompt to the API asking "What is Arduino?" and waits for a response, which it then displays on the OLED screen. This is done using a secure SSL connection, and the API key is stored as a variable in the code. Overall, this code demonstrates how an Arduino device can be used to interact with web services and display data on a small screen.

read more
BLOG
This YouTuber recreated the D-O droid from Star Wars: Episode 9 with Arduino
This YouTuber recreated the D-O droid from Star Wars: Episode 9 with Arduino
November 21, 2019

While it’s yet to make its premiere, Matt Denton has already built the D-O droid from Star Wars: The Rise of Skywalker using a MKR WiFi 1010 for control, along with a MKR IMU Shield and a MKR Motor Carrier.  The droid scoots around on what appears to be one large wheel, which conceals the Arduino boards as well as other electronics, batteries, and mechanical components. Denton’s wheel design is a bit more complicated mechanically than it first appears, as its split into a center section, with thin drive wheels on the side that enable differential steering. On top, a cone-shaped head provides sounds and movement, giving the little RC D-O a ton of personality. The droid isn’t quite finished as of the video below, but given how well it works there, the end product should be amazing!

read more

Inspired by your shopping trends

  • Grove - Light Sensor v1.2

    The resistance of photoresistor decreases when the intensity of light increases. A dual OpAmp chip LM358 on board produces voltage corresponding to intensity of light(i.e. based on resistance value...

  • Grove - Gas Sensor (MQ9)

    It can detect combustible Carbon Monoxide, Coal Gas and Liquefied Gas. The sensitivity can be adjusted by the potentiometer. Hardware Overview This is an Analog output sensor. It needs to be conn...

  • Grove - Temperature & Humidity Sensor (SHT31)

    The sensor(chip) used in the module is designed with Sensirion’s CMOSens® technology. The chip is well calibrated, linearized and compensated for digital output. The typical accuracy of this module...

  • Grove - Infrared Reflective Sensor v1.2

    The sensor consists of an IR LED and a photo sensor (phototransistor). The light emitted by the IR LED gets reflected by any object placed in front of the sensor and this reflection is detected by ...

Compare products

0 of 3 items selected

Select first item to compare

Select second item to compare

Select third item to compare

Compare