Skip to content
Free shipping on orders over 90€ to Austria, France, Germany, Italy, and Spain!*
Free shipping on orders over 90€ to Austria, France, Germany, Italy, and Spain!*

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00

Arduino Nano 33 BLE Rev2

SKU ABX00071 Barcode 7630049203501 Show more
Original price €28,07 - Original price €28,07
Original price
€28,07
€28,07 - €28,07
Current price €28,07
VAT included

Introducing the Arduino Nano 33 BLE Rev2, a cutting-edge development board powered by the nRF52840 from Nordic Semiconductors. With a 32-bit Arm® Cortex®-M4 CPU running at 64 MHz, this board boasts Bluetooth® LE capabilities for seamless data sharing with other Bluetooth® LE-enabled devices. Additionally, it supports MicroPython for enhanced flexibility in programming.

Overview

The Arduino Nano 33 BLE Rev2 stands at the forefront of innovation, leveraging the advanced capabilities of the nRF52840 microcontroller. This 32-bit Arm® Cortex®-M4 CPU, operating at an impressive 64 MHz, empowers developers for a wide range of projects. The added compatibility with MicroPython enhances the board's flexibility, making it accessible to a broader community of developers.

The standout feature of this development board is its Bluetooth® Low Energy (Bluetooth® LE) capability, enabling effortless communication with other Bluetooth® LE-enabled devices. This opens up a realm of possibilities for creators, allowing them to seamlessly share data and integrate their projects with a wide array of connected technologies.

Designed with versatility in mind, the Nano 33 BLE Rev2 is equipped with a built-in 9-axis Inertial Measurement Unit (IMU). This IMU is a game-changer, offering precise measurements of position, direction, and acceleration. Whether you're developing wearables or devices that demand real-time motion tracking, the onboard IMU ensures unparalleled accuracy and reliability.

In essence, the Nano 33 BLE Rev2 strikes the perfect balance between size and features, making it the ultimate choice for crafting wearable devices seamlessly connected to your smartphone. Whether you're a seasoned developer or a hobbyist embarking on a new adventure in connected technology, this development board opens up a world of possibilities for innovation and creativity. Elevate your projects with the power and flexibility of the Nano 33 BLE Rev2.


Tech specs

Microcontroller nRF52840 (datasheet)
USB connector Micro USB
Pins Built-in LED Pin 13
Digital I/O Pins 14
Analog Input Pins 8
PWM Pins All digital pins (4 at once)
External interrupts All digital pins
Connectivity Bluetooth® u-blox® NINA-B306
Sensors IMU BMI270 (3-axis accelerometer + 3-axis gyroscope) + BMM150 (3-axis Magnetometer)
Communication UART RX/TX
I2C A4 (SDA), A5 (SCL)
SPI D11 (COPI), D12 (CIPO), D13 (SCK). Use any GPIO for Chip Select (CS)
Power I/O Voltage 3.3 V
Input Voltage (nominal) 5-18 V
DC Current per I/O Pin 10 mA
Clock Speed Processor nRF52840 64 MHz
Memory nRF52840 256 KB SRAM, 1 MB flash
Dimensions Weight 5 gr
Width 18 mm
Length 45 mm

 

 

 

Resources for Safety and Products

Manufacturer Information

The production information includes the address and related details of the product manufacturer.

Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
https://www.arduino.cc/ 

Responsible Person in the EU

An EU-based economic operator who ensures the product's compliance with the required regulations.

Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
Phone: +39 0113157477
Email: support@arduino.cc

 

Get Inspired

FAQs

What is the difference between Rev1 and Rev2?

There has been some changes in the sensors, components and PCB design to improve the experience of the users:

  • Replacement of IMU from LSM9DS1 (9-axis) for a combination of two IMUs (BMI270 - 6-axis IMU and BMM150 - 3-axis IMU).
  • Replacement of power supply MPM3610 for MP2322.
  • Addition of VUSB soldering jumper on the top side of the board.
  • New test point for USB, SWDIO and SWCLK.

Can the Nano 33 BLE Rev2 be programmed using MicroPython?

Yes, the Nano 33 BLE Rev2 is compatible with MicroPython, to learn more visit the board installation in the Arduino and MicroPython documentation.

Do I need to change my sketch used in the previous revision?

For sketches reliant on the LSM9DS1 library to access IMU data, given the recent modification in this component, users are advised to transition to the Arduino_BMI270_BMM150 library, tailored for the updated combined IMU. For more information visit the Arduino Help Center.

Is it also compatible with the Arduino Nano Screw Terminal Adapter?

Yes, the Arduino Nano 33 BLE Rev2 is compatible with the Arduino Nano Screw Terminal Adapter.

Is it also compatible with the Arduino Nano Motor Carrier?

Yes, the Arduino Nano 33 BLE Rev2 is compatible with the Nano Motor Carrier.

Are the headers included in the box?

Yes, the headers are not soldered to the board but are included in the box.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare