Overview
Different from traditional analog light sensor, as Grove - Light Sensor, this digital module features a selectable light spectrum range due to its dual light sensitive diodes: infrared and full spectrum.
You can choose among three detection modes when taking your readings. There is infrared mode, full spectrum and human visible mode. When running under the human visible mode, this sensor will give you readings within the range of light spectrum that the eye can pick up.
Features
-
Selectable detection modes
-
High resolution 16-Bit digital output at 400 kHz I2C Fast-Mode
-
Wide dynamic range: 0.1 - 40,000 LUX
-
Wide operating temperature range: -40°C to 85°C
-
Programmable interrupt function with User-Defined Upper and lower threshold settings
Tech specs
Specifications
|
Items |
Min |
Typical |
Max |
Unit |
|
Supply voltage, VDD |
3.3 |
5 |
5.1 |
V |
|
Operating temperature |
-30 |
\ |
70 |
℃ |
|
SCL,SDA input low voltage |
-0.5 |
\ |
0.8 |
V |
|
SCL,SDA input high voltage |
2.3 |
\ |
5.1 |
V |
Get Inspired
This project displays your activity on a 12c LCD and on the Iot cloud, and temperature readings on the iot cloud
The brand new Nano Screw Terminal Adapter turns up the speed on your prototyping efforts by giving you a fast, reliable way to hook up your boards. This awesome add-on is exactly what seasoned makers have been crying out for, and is now available from the Arduino Store. Let’s take a look at this mini mechanical marvel. A solderless solution With a finished project, you’re likely to make permanent connections to your Nano by soldering it. Even if you’re connecting it using a header strip, the wires, components, sensors and accessories will be soldered, crimped or attached in a permanent way to the controller side of your project. It makes perfect sense to do this, when you’re looking for a reliable connection. The trouble with permanent connections like this is that they’re… well, permanent! Soldering and de-soldering during the design and prototyping stage can become a real chore. And it’s not good for the components or the board itself, either. The Screw Terminal Adapter is what you need. It’s something we’ve been asked for a lot, giving people a way to make robust, fast, easy connections that can be changed just as easily. Easy access to all I/Os The Nano Screw Terminal Adapter features a double row of headers. The Nano drops into the two inner rows, giving you a second, outer set that lets you connecting using jumpers, wires or what have you. Then you have a third row of connectors on either side of the adapter with a screw terminal for each pin. The perfect way to connect wires or components in a reliable, but easily changeable way. It’s never been easier to develop and design a project that with these connection options. There’s even a 9x8 prototyping area with through plated holes for adding extra components, connections or accessories. Of course, this doesn’t have to only be for prototyping. The screw terminal is a long-established, trusted connection option, so there’s no reason it can’t become a
