Overview
The Arduino Nano 33 BLE Sense Protective Silicone Case is designed to perfectly fit your Arduino Nano 33 BLE Sense, and to protect it in case of adventurous experiments.
Take full advantage of the motion sensors on your board, protect it against impact with the silicon case, and launch different science experiments.
Create any kind of devices where you just need a Nano board and power like a pedometer, a smart pet collar, a noise detector, etc. and implement them quickly by using the Silicone Case.
All the sensors, the RGB LED, and the button, as well as the USB port are easily accessible.
The detachable pin sockets allow you to use the case with a breadboard!
The two pin sockets make it easy to handle the board with mounted headers, and insulate your board from potential damage or short circuits, when using the board onto conductive surfaces. The Arduino Nano 33 BLE Sense Silicone Case makes your tiny Nano board even more portable, thanks to its keyholder loop.
Bring your board everywhere you go!
The Silicone Rubber has a smooth texture, and it’s flexible enough to allow the insertion of the board with or without headers. It comes in orange color and it is made of three pieces: the board housing and two additional pin sockets. While designed for the Nano 33 BLE Sense, the Silicone Case fits also the dimensions of the Nano 33 BLE, the Nano Every, and the Nano 33 IoT.
Resources for Safety and Products
Manufacturer Information
The production information includes the address and related details of the product manufacturer.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
https://www.arduino.cc/
Responsible Person in the EU
An EU-based economic operator who ensures the product's compliance with the required regulations.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
Phone: +39 0113157477
Email: support@arduino.cc
Get Inspired
Easy data logging with grove sensors using the MKR Connector Carrier and MKR boards
Getting started with electronics and sensing the world around you is now easier than ever with the new all-in-one Arduino Sensor Kit from Arduino, in partnership with Seeed. The 10 most popular modules and sensors for your Arduino UNO have been integrated onto a single board, providing plug-and-play convenience without the need for any soldering or wiring! Combining basic Grove sensors and actuators for the Arduino UNO, the kit contains a base shield featuring the following modules that can be connected either through the digital, analog, or I2C connectors: An OLED screen4 digital modules (LED, button, buzzer and potentiometer)5 sensors (light, sound, air pressure, temperature, and accelerometer) Just plug the Arduino Sensor Kit into the Arduino UNO, then you're ready to follow the Plug, Sketch & Play online lessons that make getting started a breeze. The kit is equipped with 16 Grove connectors, which when placed on the board, offer functionality to the various pins. With seven digital connections, four analog connections, four I2C connections, and a UART connection, the base shield can be easily mounted onto an Arduino UNO board and programmed through the Arduino IDE. Now available from the Arduino Store, the Arduino Sensor Kit comes as a standalone kit for only €23.00 / US$25.00, or can be purchased with the Arduino UNO Rev3 board as a great value bundle for €38.70 / US$39.80. For more details, check out our website here.
