Skip to content

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00

Bluetooth Low Energy 4.0 Module - HM-10

SKU TPX00152 Barcode 7630049204171 Show more
Original price €0
Original price €16,50 - Original price €16,50
Original price
Current price €16,50
€16,50 - €16,50
Current price €16,50
VAT included

Bluetooth 4.0 module (Low Energy) compliant with ISM 2.4 GHz, master/slave operating mode with transparent data transmission, based on the Texas Instruments CC2541 chip with 256K of Flash memory and 8K of RAM.

Overview

This is a Bluetooth 4.0 (Low Energy) module compliant with ISM 2.4 GHz, with master/slave mode of operation and transparent data transmission, based on the Texas Instruments CC2541 chip with 256K Flash memory and 8K RAM.

It can be controlled through simple AT commands (via UART) or programmed with custom applications. Ideal for use in projects where Bluetooth connection is needed, such as between microcontroller and PC. Power supply ranges between 2V and 3.6Vdc.

Note: SMT mounting.


Tech specs

  • Bluetooth 4.0 module compliant with ISM 2.4 GHz (HM-10)
  • Uses Texas Instruments CC2541 SoC chip with 256K Flash memory and 8K RAM
  • Supports master and slave modes
  • RX standard gain: 19.6 mA
  • TX -6 dBm: 24 mA
  • Frequency: 2402 - 2483.5 MHz in 20 kHz steps
  • Modulation and Data Rate: 1 Mbps, GFSK
  • Number of channels: 40
  • Output power: -23 to 4 dBm
  • Reception sensitivity: -93dBm/-87dBm
  • Stack: ATT, GATT, SMP, L2CAP, GAP
  • Range: over 70 meters 10-bit ADC
  • Serial interface: UART/SPI Wake-up interrupt, Watchdog Timer
  • AES Security Coprocessor
  • Power supply: ranges between 2V and 3.6V
  • VDD ripple: 100mV max
  • Current consumption (at 25°C with VDD = 3V):
    - Power Mode 3 (External Interrupts): 0.4uA
    - Power Mode 2 (SleepTimerOn): 0.9uA
    - Power Mode 1 (3-μs Wake-Up): 235uA
    - RX Standard Gain: 19.6mA
    - TX -6 dBm: 24mA
    - TX 0 dBm: - 
  • Operating temperature: -40°C to +85°C
  • Dimensions (mm): 27x13x1.6
  • Weight: 5 grams.

Conformities

The following Declarations of Conformities have been granted for this board:
CE
For any further information about our certifications please visit docs.arduino.cc/certifications

Get Inspired

PROJECT HUB
Keep Your Home a Safe Place
Keep Your Home a Safe Place
Project Tutorial by yardentd

An indoor air quality monitoring system with dust and air pollution sensors which operates a fan independently

read more

Inspired by your shopping trends

  • 30 watt stylus soldering iron

    Particularly suitable for making soldering in various applications. Power supply 230 Vac.

  • NodeMCU ESP8266

    Based on the ESP8266 Wi-Fi transceiver module and the CH340 USB converter chip, this compact (Open Source) development and prototyping board is ideal for IoT applications. The Wi-Fi module is comp...

  • Board clamping support

    Lightweight and easy to carry, this product has also small knobs to adjust the distance between the two arms with the clamps.

  • Arduino MKR WiFi 1010

    The Arduino MKR WiFi 1010 is the easiest point of entry to basic IoT and pico-network application design. Whether you are looking at building a sensor network connected to your office or home route...

Compare products

0 of 3 items selected

Select first item to compare

Select second item to compare

Select third item to compare

Compare