-
Arduino Zero
The Zero is a simple and powerful 32-bit extension of the platform established by the UNO. The Zero board expands the family by providing increased performance, enabling a variety of project opport...
-
Arduino MKR ZERO (I2S bus & SD for sound, music & digital audio data)
The MKR ZERO brings you the power of a Zero in the smaller format established by the MKR form factor. The MKR ZERO board acts as a great educational tool for learning about 32-bit application devel...
-
Arduino Nano 33 BLE with headers
The Nano 33 BLE (with headers) is Arduino’s 3.3V compatible board in the smallest available form factor: 45x18mm! The Arduino Nano 33 BLE is a completely new board on a well-known form factor. It ...
-
Arduino Nano 33 IoT
The Arduino Nano 33 IoT is the easiest and cheapest point of entry to enhance existing devices (and creating new ones) to be part of the IoT and designing pico-network applications. Whether you a...
-
Arduino Nano 33 IoT with headers
The Arduino Nano 33 IoT is the easiest and cheapest point of entry to enhance existing devices (and creating new ones) to be part of the IoT and designing pico-network applications. Whether you a...
-
Arduino Nano Every with headers
The Nano Every is Arduino’s 5V compatible board in the smallest available form factor: 45x18mm! The Arduino Nano is the preferred board for many projects requiring a small and easy to use microcon...
-
Arduino MKR NB 1500
Add Narrowband communication to your project with the MKR NB 1500. It's the perfect choice for devices in remote locations without an Internet connection, or in situations in which power isn't av...
-
Arduino MKR WAN 1310
Better and More Efficient The MKR WAN 1310, brings in a series of improvements when compared to its predecessor, the MKR WAN 1300. While still based on the Microchip® SAMD21 low power process...
-
Arduino Nano Every
The Nano Every is Arduino’s 5V compatible board in the smallest available form factor: 45x18mm! The Arduino Nano is the preferred board for many projects requiring a small and easy to use microcon...
-
Arduino Nano 33 BLE Sense Rev2
The Arduino Nano 33 BLE Sense Rev2 is Arduino’s 3.3V AI enabled board in the smallest available form factor with a set of sensors that will allow you without any external hardware to start programm...
-
Arduino Nano 33 BLE Sense Rev2 with headers
The Arduino Nano 33 BLE Sense Rev2 with headers is Arduino’s 3.3V AI enabled board in the smallest available form factor with a set of sensors that will allow you without any external hardware to s...
-
Arduino Leonardo without Headers
The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz cr...
-
Arduino Leonardo with Headers
The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz cr...
-
ARDUINO UNO WiFi REV2
The Arduino UNO WiFi Rev.2 is the easiest point of entry to basic IoT with the standard form factor of the UNO family. Whether you are looking at building a sensor network connected to your office ...
-
Grove - 2-Coil Latching Relay
Contrast to the ordinary relay, this latching relay does not need continuous power to keep the state, only a rising/falling pulse is needed to change the work state. The power can even be removed w...
-
Grove - Relay
Through it, you can control a circuit of high voltage with low voltage, say 5V on the controller. There is an indicator LED on the board, which will light up when the controlled terminals get closed.
-
Grove - Speech Recognizer
The board includes a Nuvoton ISD9160, a microphone, 1 SPI flash, 1 grove connector, 1 speaker connector and 1 led to show to your voice activity. Nuvoton ISD9160 is (SoC) Chipcorder that based on ...
-
LYRA | Handheld Game Console (Ready-To-Go)
Creoqode Lyra is a handheld game console. Powered by Raspberry Pi CM3L (Compute Module 3 Lite), Lyra will be your game console, personal computer and entertainment system at the same time. L...
-
Multi-function Environmental Module - CCS811+BME280
Build up a simple environmental monitor station with this multi-function environment sensor! Based on the combination of CCS811+BME280 chip, this module features high accuracy, I2C interface, and f...
-
Solar Lipo Charger (3.7V)
This Solar lipo charger is designed for single Lithium battery (3.7V) for intelligent charging, with input reverse polarity protection. The maximum charging current is 500 milliamperes and the con...
-
Solar Power Manager 5V
FRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application ...
-
Solar Power Manager For 12V Lead-Acid Battery
The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and applica...
-
DC-DC Power Module 25W
This Power Module is a small size 5A 350KHz 25V Buck DC to DC Converter. It can convert any DC voltage between 3.6V-25V to a selectable voltage from 3.3V to 25V. You can choose 5V direct output vol...
-
Stereo Enclosed Speaker - 3W 8Ω
Stereo Enclosed Speaker is a new passive speaker with JST PH2.0 interface. It is a perfect option for any DIY audio project which requires an 8 ohm impedance and 3W power. The suitable size and scr...
