Skip to content

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00

IR receiver sensor

Sold out
SKU TPX00156 Barcode 7630049204218 Show more
Original price €0
Original price €2,78 - Original price €2,78
Original price
Current price €2,78
€2,78 - €2,78
Current price €2,78
VAT included

Very sensitive IR sensor with preamplifier, demodulator, and filter calibrated to the frequency of 38 kHz - 600 µs, with built-in amplifier/squarer.

Overview

It has only three terminals and operates on 5 V power supply.
Vdd= + 5 Vdc, GND= ground, OUT= TTL signal output


Tech specs

  • Output: active at low level (0.2 V)
  • Power supply: 4.5 V ~ 5.5 V
  • Power consumption: 0.6 mA
  • Wavelength: 940 nm
  • BPF center frequency: 38 kHz
  • Operating temperature: -10°C ~ +60°C
  • Signal range: max. 10 m
  • Dimensions: 7.3 x 7.6 x 5.2 mm
  • Weight: 0.68 g

Get Inspired

PROJECT HUB
CapibaraZero: A multifunctional security and hacking tool
CapibaraZero: A multifunctional security and hacking tool
Project Tutorial by andreockx

CapibaraZero: A multifunctional security and hacking tool designed to be an alternative of FlipperZero™

read more
BLOG
Logo and Remote control your Arduino Robot - Video  tutorial
Logo and Remote control your Arduino Robot - Video tutorial
October 18, 2013

RS Components released the second video focused on the first steps with the Arduino Robot with Massimo Banzi, David Cuartielles and Xun Yang: In this video you will see where to find code examples on the IDE. The robot library comes with two folders named “learn” and “explore” with examples on how to use the software to program the top board – this is the board you will mainly interact with while the motor board runs its original firmware. One of the first examples of coding on the Arduino Robot is called “LOGO” which is very similar to an early educational programming language that controlled a virtual turtle moving across the screen with simple instructions. This time however, instead of having a small virtual turtle running on a screen, we have a robot that can respond to commands demonstrating a basic example of movement. “LOGO” invites users to interact with the robot using the keypad to tell the robot whether to move forwards/backwards or to turn left/right. The program can store a series of commands that will then be executed one at a time. Xun and David show users where to find the LOGO example and how to upload it to the robot's control board. You will notice that the robot's motors are disengaged when the USB cable is connected. The Arduino Robot can be pretty powerful and this feature prevents it from running away with your laptop! Since all motors are slightly different, users will have to configure the robot's movement using a different example called “Calibration”. Using a screwdriver on the trimmer on the bottom board, it is possible to balance the strength applied by each one of the wheels so that the robot moves straight when asked to. The video closes with an example of how to use a simple IR-receiver connected to one of the sensor inputs on the robot to control it using a small universal TV-remote. This program is also part of the basic list of examples in the library. Go and run with the first Arduino on wheels!

read more

Inspired by your shopping trends

  • Grove - Infrared Reflective Sensor v1.2

    The sensor consists of an IR LED and a photo sensor (phototransistor). The light emitted by the IR LED gets reflected by any object placed in front of the sensor and this reflection is detected by ...

  • 4 relay module 5VDC 10A (assembled)

    This module is equipped with 4 relays that allow you to activate/deactivate the load connected to them 240V/10A max. It has optoisolated inputs and status LEDs.

  • Grove - Temperature & Humidity Sensor (SHT31)

    The sensor(chip) used in the module is designed with Sensirion’s CMOSens® technology. The chip is well calibrated, linearized and compensated for digital output. The typical accuracy of this module...

  • Arduino MKR IoT Carrier Rev2

    With this carrier in combination with any board from the MKR family, you can quickly create your next IoT project without any extra components. This carrier has all you need in sensors and actuator...

Compare products

0 of 3 items selected

Select first item to compare

Select second item to compare

Select third item to compare

Compare