Grove - Sunlight Sensor
Sold outThe Grove - Sunlight Sensor is a multi-channel digital light sensor, which has the ability to detect UV-light, visible light and infrared light.
Overview
This device is based on SI1145, a new sensor from SiLabs. The Si1145 is a low-power, reflectance-based, infrared proximity, UV index and ambient light sensor with I2C digital interface and programmable-event interrupt output.
This device offers excellent performance under a wide dynamic range and a variety of light sources including direct sunlight.
The Grove - Sunlight Sensor include an on-bard Grove connector, which help you to connect it your Arduino easily.
Features:
- Digital light sensor
- Wide spectrum detection range to improve accuracy.
- Programmable configuration which make it versatile for various applications.
- Detect sunlight directly
- Grove compatible
- I2C Interface (7-bit)
Tech specs
|
Operating Voltage |
3.0-5.5V |
|
Working current |
3.5mA |
|
Wave length |
280-950nm |
|
Default I2C Address |
0x60 |
|
Operating Temperature |
-45-85℃ |
Get Inspired
Another Slot Car Lap Counter, but if I did it anyone can do!
If you need a device which draws a certain amount of current and power for testing, then GreatScott! has just the solution. His project uses an Arduino Nano, along with a separate IC and a voltage divider, to measure both current and voltage input from the power source. It then employs this data to properly adjust a MOSFET, dissipating the correct amount of voltage and power as required. Interface is handled via a rotary encoder and a 16x2 I2C LCD display, and the electronics are housed in a solid-looking enclosure. As seen in the video below, the adjustable constant load features an impressively large heat sink, needed to take care of the 30V and 20A that the setup is capable of drawing.
