Bluetooth Low Energy 4.0 Module - HM-10
Bluetooth 4.0 module (Low Energy) compliant with ISM 2.4 GHz, master/slave operating mode with transparent data transmission, based on the Texas Instruments CC2541 chip with 256K of Flash memory and 8K of RAM.
Overview
This is a Bluetooth 4.0 (Low Energy) module compliant with ISM 2.4 GHz, with master/slave mode of operation and transparent data transmission, based on the Texas Instruments CC2541 chip with 256K Flash memory and 8K RAM.
It can be controlled through simple AT commands (via UART) or programmed with custom applications. Ideal for use in projects where Bluetooth connection is needed, such as between microcontroller and PC. Power supply ranges between 2V and 3.6Vdc.
Note: SMT mounting.
Tech specs
- Bluetooth 4.0 module compliant with ISM 2.4 GHz (HM-10)
- Uses Texas Instruments CC2541 SoC chip with 256K Flash memory and 8K RAM
- Supports master and slave modes
- RX standard gain: 19.6 mA
- TX -6 dBm: 24 mA
- Frequency: 2402 - 2483.5 MHz in 20 kHz steps
- Modulation and Data Rate: 1 Mbps, GFSK
- Number of channels: 40
- Output power: -23 to 4 dBm
- Reception sensitivity: -93dBm/-87dBm
- Stack: ATT, GATT, SMP, L2CAP, GAP
- Range: over 70 meters 10-bit ADC
- Serial interface: UART/SPI Wake-up interrupt, Watchdog Timer
- AES Security Coprocessor
- Power supply: ranges between 2V and 3.6V
- VDD ripple: 100mV max
- Current consumption (at 25°C with VDD = 3V):
- Power Mode 3 (External Interrupts): 0.4uA
- Power Mode 2 (SleepTimerOn): 0.9uA
- Power Mode 1 (3-μs Wake-Up): 235uA
- RX Standard Gain: 19.6mA
- TX -6 dBm: 24mA
- TX 0 dBm: - - Operating temperature: -40°C to +85°C
- Dimensions (mm): 27x13x1.6
- Weight: 5 grams.
Conformities
Get Inspired
Our team at Embedded World (April 9th-11th in Nuremberg) has announced not one, but two groundbreaking additions to the Arduino Pro range that are ready to elevate your prototyping and connectivity experiences. Say hello to the Arduino Portenta Mid Carrier and the Arduino Pro 4G Module! Portenta Mid Carrier: maximizing prototyping potential This ultimate companion to the Portenta boards family is your gateway to seamless prototyping and expanded connectivity, designed to grant you zero hassles and maximum efficiency. From CAN lines to Ethernet, microSD, USB, camera interfaces, and more, it allows you to effortlessly tap into high-density signals through dedicated headers. Plus, debug pins and the RTC battery backup will simplify your development journey even more. Compatible with Portenta C33, Portenta H7, and Portenta X8, it adapts to your evolving development needs with ease. Whether you’re delving into machine vision prototyping or testing cellular connectivity, this is the carrier for you. Find out more from the dedicated page, or head straight to the store. Arduino Pro 4G Module: revolutionizing connectivity Are you ready to revolutionize your connectivity game? Engineered to seamlessly integrate with the Portenta family, the Arduino Pro 4G Module comes with a plethora of benefits, ensuring your projects thrive with lightning-fast data throughput and high bandwidths, powered by a robust Cat.4 modem from Quectel. Enjoy secure data transfer, long-range global coverage even in the most isolated locations, and cost-efficient flexibility – all in the widely adopted Mini PCIe form factor: from remote maintenance to building safety inspection, the possibilities are endless. The full details are available on our website, but you can also jump right to purchase from the Arduino Store! Embark on your journey of innovation with Arduino’s expanding ecosystem Our end-to-end ecosystem of hardware, software, and cloud
