Skip to content

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00

Grove - Sound Sensor

Sold out
SKU C000172 Barcode 101020023 Show more
Original price €0
Original price €6,15 - Original price €6,15
Original price
Current price €6,15
€6,15 - €6,15
Current price €6,15
VAT included

Grove - Sound Sensor can detect the sound intensity of the environment.

Overview

The main component of the module is a simple microphone, which is based on the LM386 amplifier and an electret microphone. This module’s output is analog and can be easily sampled and tested by an Arduino.

Features:

  • Easy to use
  • Provides analog output signal
  • Easily integrates with Logic modules on the input side of Grove circuits
  • Compatible with the Seed Grove System

Tech specs

 

Item

Value

Operating Voltage Range

3.3/5 V

Operating Current(Vcc=5V)

4~5 mA

Voltage Gain(V=6V, f=1kHz)

26 dB

Microphone sensitivity(1kHz)

52-48 dB

Microphone Impedance

2.2k Ohm

Microphone Frequency

16-20 kHz

Microphone S/N Radio

54 dB

Get Inspired

BLOG
10 most popular modules and sensors for the Arduino UNO all on one board
10 most popular modules and sensors for the Arduino UNO all on one board
December 1, 2020

Getting started with electronics and sensing the world around you is now easier than ever with the new all-in-one Arduino Sensor Kit from Arduino, in partnership with Seeed. The 10 most popular modules and sensors for your Arduino UNO have been integrated onto a single board, providing plug-and-play convenience without the need for any soldering or wiring! Combining basic Grove sensors and actuators for the Arduino UNO, the kit contains a base shield featuring the following modules that can be connected either through the digital, analog, or I2C connectors: An OLED screen4 digital modules (LED, button, buzzer and potentiometer)5 sensors (light, sound, air pressure, temperature, and accelerometer) Just plug the Arduino Sensor Kit into the Arduino UNO, then you're ready to follow the Plug, Sketch & Play online lessons that make getting started a breeze. The kit is equipped with 16 Grove connectors, which when placed on the board, offer functionality to the various pins. With seven digital connections, four analog connections, four I2C connections, and a UART connection, the base shield can be easily mounted onto an Arduino UNO board and programmed through the Arduino IDE. Now available from the Arduino Store, the Arduino Sensor Kit comes as a standalone kit for only €23.00 / US$25.00, or can be purchased with the Arduino UNO Rev3 board as a great value bundle for €38.70 / US$39.80. For more details, check out our website here.

read more

Inspired by your shopping trends

  • Grove - Digital Light Sensor

    Different from traditional analog light sensor, as Grove - Light Sensor, this digital module features a selectable light spectrum range due to its dual light sensitive diodes: infrared and full spe...

  • Grove - Relay

    Through it, you can control a circuit of high voltage with low voltage, say 5V on the controller. There is an indicator LED on the board, which will light up when the controlled terminals get closed.

  • Grove - Temperature & Humidity Sensor (SHT31)

    The sensor(chip) used in the module is designed with Sensirion’s CMOSens® technology. The chip is well calibrated, linearized and compensated for digital output. The typical accuracy of this module...

  • Ring with 24 RGB WS2812 LEDs and integrated driver

    The data channel for communication is a One-Wire serial type and can be controlled with microcontrollers like Arduino.  You can set the refresh frequency as desired to make certain light effects i...

Compare products

0 of 3 items selected

Select first item to compare

Select second item to compare

Select third item to compare

Compare