Skip to content

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00

Grove - Gas Sensor (MQ9)

SKU C000149 Barcode 101020045 Show more
Original price €0
Original price €10,09 - Original price €10,09
Original price
Current price €10,09
€10,09 - €10,09
Current price €10,09
VAT included

The Grove - Gas Sensor (MQ9) module is useful for gas leakage detecting (in home and industry).

Overview

It can detect combustible Carbon Monoxide, Coal Gas and Liquefied Gas. The sensitivity can be adjusted by the potentiometer.

Hardware Overview

This is an Analog output sensor. It needs to be connected to any one Analog socket in Grove Base Shield. It is possible to connect the Grove module to Arduino directly by using jumper wires. When doing so, please refer to the connection table below:

Arduino

Gas Sensor

5V

VCC

GND

GND

NC

NC

Analog A0

SIG

The output voltage from the Gas sensor increases when the concentration of gas. Sensitivity can be adjusted by rotating the potentiometer.
Please note that the best preheat time for the sensor is 24 hours and above.

Note: Hot-swapping the grove may lead to IC burnout, please turn off the power of main board before swapping grove.


Tech specs

Specification

Item

Parameter

Min

Typical

Max

Unit

VCC

Working Voltage

4.9

5

5.1

V

PH

Heating consumption

0.5

-

340

mW

RL

Load resistance

adjustable

RH

Heater resistance

-

33Ω±5%

-

Ω

Rs

Sensing Resistance

2

-

20000

Ω

CO/CH4/LPG Scope

Detecting Concentration

200

-

1000/10000/10000

ppm

Technical Details

Dimensions

130mm x 90mm x 23mm

Weight

G.W 15g    

Get Inspired

PROJECT HUB
Create a Human-Machine Interface (HMI) with Arduino
Create a Human-Machine Interface (HMI) with Arduino
Project Tutorial by sabas1080

Learn how to build a complete HMI with Arduino that will allow you to interact with your projects in an intuitive and visual way.

read more
BLOG
Machine-to-machine communication is easier than ever: Opta now supports OPC UA
Machine-to-machine communication is easier than ever: Opta now supports OPC UA
November 5, 2024

OPC Unified Architecture – OPC UA in short – is a cross-platform, open-source machine-to-machine communication protocol for industrial automation. It was developed by the Open Platform Communications (OPC) Foundation and is defined in detail in the IEC 62541 standard. With the release of the Arduino_OPC_UA library we enable users to convert any product from our Arduino Opta range into an OPC UA-enabled device. Step-by-step guide to setting up OPC UA on Arduino Opta It’s as simple as uploading a single sketch onto your Opta and connecting it to an Ethernet network. Once uploaded, the OPC UA firmware exposes the Arduino Opta’s analog and digital inputs, the user button and LED (only Arduino Opta WiFi), as well as its relay outputs as properties that can be read from or written to using OPC UA. OPC UA communication is performed using OPC UA binary encoding via TCP sockets. Arduino_OPC_UA is a port of the Fraunhofer open62541 library implementing IEC 62541 in highly portable C99 for both Windows and Linux targets. One serious challenge during the porting of open62541 was to decide on sensible tradeoffs concerning RAM consumption, as using OPC UAs full namespace zero (NS0) requires up to 8 MB of RAM while the STM32H747 powering the Arduino Opta has a total of 1 MB of SRAM to offer – some of which already allocated by the the Arduino framework for the Arduino Opta. Expand functionality with Arduino Opta Modules and OPC UA integration Additionally, Arduino_OPC_UA supports the automatic discovery, configuration and exposure as OPC UA objects of the recently released Arduino Opta expansion modules. Currently three different expansion modules exist: Arduino Opta Analog Expansion (A0602), Arduino Opta Digital Expansion with electro-mechanical relay outputs (D1608E), and with solid-state relay outputs (DS1608S). During system start-up, the Arduino Opta’s expansion bus is queried for connected expansion modules and automatically configures them and

read more

Inspired by your shopping trends

  • Grove - Dust Sensor(PPD42NS)

    Provide reliable data for air purifier system Easy maintenance PWM output Grove compatible interface Compact and light design. This Dust Sensor gives a good indication of the air quality in an env...

  • Gravity: Analog CO2 Gas Sensor (MG-811 Sensor)

    Great and powerful sensor for everyone that wants to know the exact concentration of CO2(Carbon Dioxide) in the air.  This is the first CO2 sensor compatible with Arduino. The output voltage of th...

  • Grove - Temperature & Humidity Sensor (SHT31)

    The sensor(chip) used in the module is designed with Sensirion’s CMOSens® technology. The chip is well calibrated, linearized and compensated for digital output. The typical accuracy of this module...

  • 1 relay module 5 Vdc 10A (assembled)

    This module is equipped with 1 relay that allows you to activate/deactivate the load connected to it 240V/10A (max). The relay is activated by connecting the positive to 5 volts to the “S” pin.

Compare products

0 of 3 items selected

Select first item to compare

Select second item to compare

Select third item to compare

Compare