Skip to content

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00

Solar Panel Charge Controller - 10 A

SKU TPX00180 Barcode 7630049204454 Show more
Original price €0
Original price €17,34 - Original price €17,34
Original price
Current price €17,34
€17,34 - €17,34
Current price €17,34
VAT included

Charge controller for photovoltaic applications controlled by a microcontroller and capable of operating automatically at both 12 and 24 V.

Overview

It allows to provide the right degree of current to the batteries protecting them from an excess of discharge or charge in order to prolong their life cycle as much as possible.

Attention! use only with 12 and 24 V solar panels.

It protects the battery from polarity reversal, automatically enters protection and locks when the load current exceeds the regulator’s range. In case of short circuit, it enters protection and it overload protection.

To avoid complete battery discharge, the regulator will automatically disconnect the load at a certain voltage that cannot be less than 11.2 V for the 12 V battery and 22.4 V for the 24 V batteries. 


Tech specs

  • Nominal voltage: 12 V / 24 V automatic detection
  • Maximum current: 10 A
  • Maximum solar panel input voltage: 41 V
  • Cut-off voltage: charged battery: 13 V (at 12 V) - 26 V (at 24 V) discharged battery: 11.2 V (at 12 V) - 22.4 V (at 24 V)
  • Reconnection voltage: 13 V (at 12 V) - 26 V (at 24 V)
  • Voltage drop: < 170 mV
  • Dimensions (mm): 133x70x35
  • Weight: 150 g

Conformities

The following Declarations of Conformities have been granted for this board:
CE
For any further information about our certifications please visit docs.arduino.cc/certifications

Get Inspired

PROJECT HUB
Keep Your Home a Safe Place
Keep Your Home a Safe Place
Project Tutorial by yardentd

An indoor air quality monitoring system with dust and air pollution sensors which operates a fan independently

read more

Inspired by your shopping trends

  • Solar Power Manager For 12V Lead-Acid Battery

    The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and applica...

  • Mini solar cell 2V 200mA

    A small polycrystalline photovoltaic cell, ideal for conducting experiments with solar energy or LED applications.

  • 5.5 V 1 watt solar panel

    Output voltage: 5.5 V, maximum current: 170 mA, connection: red-black cable with JST connector.

  • ARDUINO UNO WiFi REV2

    The Arduino UNO WiFi Rev.2 is the easiest point of entry to basic IoT with the standard form factor of the UNO family. Whether you are looking at building a sensor network connected to your office ...

Compare products

0 of 3 items selected

Select first item to compare

Select second item to compare

Select third item to compare

Compare