Overview
If you are experimenting with monitoring fleets, high-altitude scientific experiments, or any kind of project requiring localization of devices, the MKR GPS Shield will offer you the functionality you need, and it is plug 'n' play!
The MKR GPS Shield is based on the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. It is meant to be used on top of boards in the MKR format, but thanks to its Eslov connector, it is also possible to hook it up to any board having that kind of connector available using a cable.
This module is designed to operate with different positioning services concurrently. It receives and processes the signals from GPS, GLONASS, and Galileo. It interfaces with Arduino boards either through a serial interface, when used with headers and put on top of a MKR board, or through an I2C interface and a dedicated ESLOV cable supplied as bundle.
Configuration Commands and Backup
The GPS module can be configured via special commands. We have included an on-board battery holder for the system to keep the configurations made via software. This can be convenient when e.g. changing the operation mode of the GPS to 1g, something common in high altitude experiments, where specific settings away from the default ones are needed for the device.
Another example is the use of Galileo's localization option, which is disabled by default, but can be enabled by sending a configuration message (UBXCFG-GNSS) to the receiver. You can find a detailed description of all of the commands in the protocol here.
Getting Started
Our Arduino_MKRGPS library handles the two different interfaces and offer a consistent set of APIs designed for a full usage of the GPS acquired information
Need Help?
Check the Arduino Forum for questions about the Arduino Language, or how to make your own Projects with Arduino. Need any help with your board please get in touch with the official Arduino User Support as explained in our Contact Us page.
Warranty
You can find here your board warranty information.
Tech specs
| GNSS receiver | u-blox module SAM-M8Q (datasheet) |
| Connectors | MKR headers / Eslov |
| Input Voltage | 3.3V |
| Operating Voltage | 3.3V |
| Backup battery | CR1216 |
| Communication | Serial / I2C / DCC |
| Length | 45 mm |
| Width | 25 mm |
| Weight | 14 gr. |
Conformities
Resources for Safety and Products
Manufacturer Information
The production information includes the address and related details of the product manufacturer.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
https://www.arduino.cc/
Responsible Person in the EU
An EU-based economic operator who ensures the product's compliance with the required regulations.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
Phone: +39 0113157477
Email: support@arduino.cc
Documentation
OSH: Schematics
The Arduino MKR GPS Shield is open-source hardware! You can build your own board using the following files:
EAGLE FILES IN .ZIP SCHEMATICS IN .PDF
Additional I2C Port
The MKR GPS Shield has an additional connector meant as an extension of the I2C bus. It's a small form factor 5-pin connector with 1.0 mm pitch. The mechanical details of the connector can be found in the connector's datasheet.
The I2C port, also referred to as the Eslov self-identification port within Arduino, comes with: SDA, SCL, GND, +5V, and an extra digital pin meant to send an alarm to the otherwise plain I2C devices connected to it. The pinout is shown in the following image:
If you are interested in designing your own modules for Arduino boards with this expansion port, the connector we suggest using is code: SHR-05V-S-B, also in the picture.
Learn more
Get Inspired
Save the date on May 28th-30th, Arduino will be back at SPS Italia in Parma, showcasing how our open-source solutions are revolutionizing the industrial sector with high performance and accessibility. At Arduino’s booth #C020, hall 7, we’ll be presenting the latest additions to our ecosystem, designed to help companies of all sizes embrace digital transformation and the Industrial IoT. Here’s a sneak peek at what’s in store: Opta: the “Swiss Army knife” of industrial automation Opta is our versatile micro PLC: reliable, secure, and open-source, it avoids vendor lock-in and is the ideal choice for both newcomers and seasoned professionals. Opta can be programmed with standard IEC 61131-3 languages or within Arduino’s environment, offering unmatched flexibility. “With Opta, we aim to support companies looking for increased visibility into their processes through IoT retrofitting, breaking down barriers to industrial automation, and those that produce machinery, seeking a ready-to-use controller for IoT and edge AI. Opta offers high performance, secure connectivity, and unprecedented programming flexibility at an affordable price,” says Arduino’s CEO Fabio Violante. Opta Expansion Modules to boost your projects New expansion modules allow you to enhance Opta’s capabilities: the Arduino Pro Opta Ext D1608E, Arduino Pro Opta Ext D1608S, and Arduino Pro Opta Ext A0602 provide additional programmable inputs, relay outputs, and analog I/O options for diverse data acquisition and control needs. Live demos for a hands-on experience Explore live demonstrations of Opta and other key products from our Portenta and Nicla families. Discover how these solutions can be applied to industrial automation, remote monitoring, predictive maintenance, and more! A strategic partnership with Melchioni Electronics We’re excited to collaborate with Melchioni Electronics, enhancing our reach and support for Arduino’s innovative solutions.
