Skip to content
Please make sure to check the shipping deadlines* to ensure your gifts arrive on time!
Please make sure to check the shipping deadlines* to ensure your gifts arrive on time!

    Your cart is empty

    Time to spark some excitement 🛒⚡

Taxes and shipping calculated at checkout
Subtotal €0,00

Futura Group

Futura Group

  • 1 relay module 5 Vdc 10A (assembled)

    This module is equipped with 1 relay that allows you to activate/deactivate the load connected to it 240V/10A (max). The relay is activated by connecting the positive to 5 volts to the “S” pin.

  • Microwave motion radar

    The RCWL-0516 is particularly suitable as an alternative to using a PIR motion sensor. When it detects a moving object, the output changes from a low logic level to a high level (3.3 volts). Approp...

  • NFC/RFID reader with two transponders

    It can function as an RFID card reader/writer, NFC reader with Android smartphone and in wireless mode with two identical devices. It can be used with Arduino to create access control devices. The...

  • NodeMCU ESP8266

    Based on the ESP8266 Wi-Fi transceiver module and the CH340 USB converter chip, this compact (Open Source) development and prototyping board is ideal for IoT applications. The Wi-Fi module is comp...

  • DC/DC converter with adjustable 1.5-35V output

    Step-Down DC/DC switching converter, with particularly small dimensions (48.35 x 23.35 x 14 mm), capable of converting a DC voltage between 3 and 40 volts into an output voltage from 1.5 to 35 volt...

  • DC/DC Step-up converter with 4-30V output

    DC/DC step-up converter with particularly small dimensions (51 x 21.5 x 13 mm), capable of converting a DC voltage between 3.5 and 30 volts into an output voltage from 4 to 30 volts (adjustable via...

  • 16x2 LCD display with I²C interface

    Particularly suitable for reducing the number of I/Os required when used with Arduino or other microcontroller, the I²C interface has jumpers to activate the backlight and contrast adjustment which...

  • L298 driver for DC/Stepper motors

    Based on the ST L298N chip, this module is designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC motors, and stepper motors. It has the ability to re...

  • 40 colored male-male jumper wires

    Ideal for use with experimental plates.

  • 40 colored male-female jumper wires

    40 separable wires, each 20 cm long, with female 1-pole connector on one end and male 1-pole connector on the other end. Ideal for use with experimental plates.

  • 40 colored female-female jumper wires

    Ideal for use with experimental boards! The wires are separable for ease of use.

  • Pack of 50 female-female jumper wires in various colors

    Ideal for use with experimental boards!

  • IR receiver sensor

    It has only three terminals and operates on 5 V power supply. Vdd= + 5 Vdc, GND= ground, OUT= TTL signal output

  • Box 500 electrolytic capacitors

    Transparent plastic box with compartments and closing hinge containing 500 radial electrolytic capacitors divided into 24 values ranging from 0.1µF - 1000µF. Dielectric material: aluminum. Conten...

  • Box 180 mixed buttons

    The package includes: 20 pcs - 6x6x4.3 mm 20 pcs - 6x6x5 mm 20 pcs - 6x6x6 mm 20 pcs - 6x6x7 mm 20 pcs - 6x6x8 mm 20 pcs - 6x6x9.5 mm 20 pcs - 6x6x11 mm 15 pcs - 6x6x12 mm 15 pcs - 6x6x1...

  • Box 525 1% precision resistors - 17 values

    Contents of the package: 25 pieces - 0 Ohm 25 pieces - 10 Ohm 25 pieces - 20 Ohm 25 pieces - 47 Ohm 25 pieces - 470 Ohm 25 pieces - 2.2 KOhm 25 pieces - 4.7 KOhm 25 pieces - 22 KOhm 25 p...

  • Bluetooth Low Energy 4.0 Module - HM-10

    This is a Bluetooth 4.0 (Low Energy) module compliant with ISM 2.4 GHz, with master/slave mode of operation and transparent data transmission, based on the Texas Instruments CC2541 chip with 256K F...

  • Breadboard - 840 contacts

    This is a 840-point experimental ABS board with a self-adhesive base. Dimensions (mm): 174x66,5x8,5 mm Weight: 100 grams.

  • Breadboard - 830 contacts

    This is a 830-point experimental ABS board with a self-adhesive base. Dimensions (mm): 165x55x10 Weight: 69 grams.

  • Breadboard - 400 contacts

    Dimensions: 82 x 55 mm.  White color.

  • Gesture Breakout with APDS-9960

    With this RGB and Gesture sensor, you will be able to control a computer, microcontroller, robot, and much more with a simple hand gesture! The usage pins are as follows: VL (optional IR LED power...

  • Speed control for DC motors from 3 to 35V 5A

    Also ideal for adjusting the brightness of LED lights and strips.

  • Third hand with lens, light and soldering iron stand

    It allows you to hold small objects and to have both hands free. The adjustable tweezers and the adjustable magnifying glass, available to you, allow you to carry out precision work with extreme co...

  • Silicone mat for soldering 337x227 mm

    Extremely flexible, even after folded it always returns to its original shape. Dimensions 337 x 227 mm.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare