Overview
Even though Arduino Education kits are jam-packed with everything you need, we know that mislaying parts in the excitement of getting hands-on in a classroom can sometimes happen.
In the Arduino Replacements Pack, you’ll find all the common electronics parts two students may need to complete their projects.
This pack has replacement parts for the Arduino Starter Kit Classroom Pack, Arduino Student Kit, Arduino Education Starter Kit, Arduino CTC 101 and ARDUINO CTC GO! - CORE MODULE.
The pack contains a total of 183 replacement parts, including a breadboard, jump wires, LEDs, resistors, transistors, sensors, and more. (It doesn’t include motors, as you’ll find they’re not lost as often! But if you do need a new motor, board, or USB cable, you can find them all in our online store.)
Note that for larger products such as CTC GO!, you may need more than one pack of replacement parts.
Tech specs
The Arduino Replacement Pack includes:
- 1 Breadboard Assembly
- 10 Jumper Wires
- 5 Red LEDs
- 5 Green LEDs
- 5 Yellow LEDs
- 10 220Ω Resistors
- 5 680Ω Resistors
- 5 560Ω Resistors
- 5 470Ω Resistors
- 5 1.2 KΩ Resistors
- 5 10 KΩ Resistors
- 5 1 KΩ Resistors
- 5 4.7 KΩ Resistors
- 5 10 MΩ Resistors
- 5 1 MΩ Resistors
- 2 100 uF capacitor
- 2 Phototransistors
- 2 Piezos
- 5 Push Buttons
- 5 Potentiometers
- 5 Knobs for potentiometer
- 1 Battery Wire 9V - open lead
- 1 Zener diode
- 1 Temperature sensor
- 1 Optocoupler
- 1 Mosfet transistors
- 1 Tilt sensor
- 1 Steel ball 12 mm diameter
Resources for Safety and Products
Manufacturer Information
The production information includes the address and related details of the product manufacturer.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
https://www.arduino.cc/
Responsible Person in the EU
An EU-based economic operator who ensures the product's compliance with the required regulations.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
Phone: +39 0113157477
Email: support@arduino.cc
Get Inspired
Getting started with electronics and sensing the world around you is now easier than ever with the new all-in-one Arduino Sensor Kit from Arduino, in partnership with Seeed. The 10 most popular modules and sensors for your Arduino UNO have been integrated onto a single board, providing plug-and-play convenience without the need for any soldering or wiring! Combining basic Grove sensors and actuators for the Arduino UNO, the kit contains a base shield featuring the following modules that can be connected either through the digital, analog, or I2C connectors: An OLED screen4 digital modules (LED, button, buzzer and potentiometer)5 sensors (light, sound, air pressure, temperature, and accelerometer) Just plug the Arduino Sensor Kit into the Arduino UNO, then you're ready to follow the Plug, Sketch & Play online lessons that make getting started a breeze. The kit is equipped with 16 Grove connectors, which when placed on the board, offer functionality to the various pins. With seven digital connections, four analog connections, four I2C connections, and a UART connection, the base shield can be easily mounted onto an Arduino UNO board and programmed through the Arduino IDE. Now available from the Arduino Store, the Arduino Sensor Kit comes as a standalone kit for only €23.00 / US$25.00, or can be purchased with the Arduino UNO Rev3 board as a great value bundle for €38.70 / US$39.80. For more details, check out our website here.
