Overview
A single solution to connect your smart devices to the Cloud. The antenna supports the GSM 850 / 900 / 1800 / 1900 MHz and UMTS bands. Designed for small devices, this antenna will work when used as wireless terminal, gateway, or access point. It is a ground plane independent design, housed in a robust waterproof plastic cover. It can be used outdoors in any kind of telemetry project, as well as for discreet in-vehicle installations. It comes with a high grade adhesive tape that allows the antenna to be attached to any surface. Please note, the antenna is not meant to be mounted on large metallic surfaces, since it would affect the antenna’s coverage. It works great on other materials such as glass, plastic, wood, or cardboard.
List of Compatible Boards
This penta-band antenna is supported by the following official Arduino boards:
You can connect the antenna to any other boards with a micro UFL connector.
Tech specs
The antenna has been characterized for 5 different bands as shown in the following tables:
Band | Gain | VSWR | Impedance | Polarization |
GSM 850 (824-894 MHZ) | <0 dBi | <2 | 50 OHM | linear |
GSM 900 (890-960 MHZ) | <1 dBi | <2 | 50 OHM | linear |
GSM 1800 (1710-1880 MHZ) | <1 dBi | <2 | 50 OHM | linear |
GSM 1900 (1850-1990 MHZ) | <0 dBi | <2,2 | 50 OHM | linear |
UMTS (1900-2200 MHz) | <0 dBi | <2,5 | 50 OHM | linear |
Other characteristics:
- Dimensions: 130x16x5 mm
- Cable length: 120 mm / 4.75 inch
- Weight: 1 gramm
- Connector: micro UFL
- Housing: plastic
- Support: double-sided tape
Resources for Safety and Products
Manufacturer Information
The production information includes the address and related details of the product manufacturer.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
https://www.arduino.cc/
Responsible Person in the EU
An EU-based economic operator who ensures the product's compliance with the required regulations.
Arduino S.r.l.
Via Andrea Appiani, 25
Monza, MB, IT, 20900
Phone: +39 0113157477
Email: support@arduino.cc
Documentation
Get Inspired
I have prepare home Automoation project using Arduino nano esp32
There are almost endless variations of clocks for sale on the internet today, but it is still easy to end up in a situation where you can't quite find a model with the style and features you want. Marco Zonca ended up with that problem while searching for a new clock to put in his music studio. Nothing on the market fit the bill, so he built this minimalist network-updated digital clock. Zonca wanted a simple design, the ability to adjust brightness, and NTP (Network Time Protocol) updates. There are clocks available with those features, but nothing in the style Zonca wanted. So he created the perfect clock for himself. It displays 24-hour time across a red LED matrix, lets the user control settings like brightness via Bluetooth® Low Energy communication, and always stays in sync with network time. An Arduino Nano ESP32 board, programmed through Arduino Web Editor, controls all of those functions. It mounts onto a custom PCB that Zonca designed for this clock. The PCB also hosts an 8×32 LED matrix display with MAX7219 driver. Three buttons on the PCB let the user select modes. The PCB fits into a black 3D-printed enclosure that reflects the overall minimalist style. Now Zonca has the perfect clock for his music studio. If you like the look of it, the sketch, PCB files, and 3D enclosure are all available on Hackster.io.