IONO ETHERNET PLC (Relay, Analog/Digital I/Os, RS-485)
- Tech Specs
Iono is a work-suit for Arduino, it turns it into a PLC that combines the ease of use of the Arduino platform and the vast amount of software available for it with robust input and output electronic interfaces.
Iono can be employed both in industrial and residential environments, for professional applications where extreme reliability, ruggedness and compliance with technical and safety directives are required.
As an Ethernet I/O module
Out of the box, Iono Ethernet includes a Web application and it is ready to be used as a simple Ethernet I/O module that you can control and configure through a nice Web interface and/or with a simple HTTP API.
It is compliant with the 2014/35/UE (Low Voltage) and 2014/30/UE (EMC) CE directives, and the harmonised standards for electromagnetic compatibility (EN61000-6-2:2005), electrical safety (EN60664-1:2007), emission (EN61000-6-3:2007) as well as the RoHS directive for hazardous substances (2011/65/UE).
Iono Ethernet ships with the WebApp sketch pre-installed and the following network configuration:
- Power up iono
- Check that the LD1 power LED, next to the power supply terminals, is on
- Connect iono to your network and, using any modern Web browser from a device within the same network, go to http://192.168.0.100
- Click the settings icon and enter your preferred network parameters and password, then press save
- You should now be able to access iono again using the newly assigned address
The Arduino Ethernet board requires the “USB Serial Light Adapter” for programming.